Kingston Brass HGKFA331810CD Bryndle Farmhouse Solid Surface White Stone 33 in. Single Bowl Kitchen Sink Installation Guide

Need Tools:
SUMME = TO =
Screwdriver Scroll Saw Silicone Sealant
INSTALLATION INSTRUCTIONS
For Use FARMHOUSE UNDERMOUNT SINK
1. Measure the actual height of the sink. 3 3. Add 1/8" to the height of the sink and
cut front of the cabinet using that
dimension, sink should be supported
by the 2"x4" supports not the cabinet
front, depending on the configuration
of your base cabinet, it may be
necessary to remove the doors and
replace them with smaller doors.
2. Using this measurement install 2" x 4"
supports across the base cabinet, the
sink should be able to sit on top of the
supports and its top rim should be at a
point right below the finished countertop.
4. Install the sink in the opening, check that
the sink is level from side to side and
front to back, add wood shims if
necessary, once sink has been leveled,
fill the gaps using silicone caulking.
© 2017-12-L Kingston Brass
GOURMETIER
www. kKingstonbrass.com
TOLL-FREE CUSTOMER SERVICE: 1-877-2-KBRASS
TECHNICAL SUPPORT E-mail: [email protected]
12775 Reservoir Street, Chino, CA91710