Home Styles 5436-42 5th Avenue 1-Drawer Gray Nightstand Assembly Instructions

88 5436 42
homestyles
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Night Stand .
Do not use power tools above 8 volts to assemble.
7
re
CM
\ \
a )
Part List 4
A > Back Panel
To Front Rail ac De
Р 1 рс. PC.
1 pc.
E.
Front Rail |
1 pc. ;
B. C.
Side Panel Side Panel =
1 pc. ] 1 pc. Back Rail
1 pc.
of,
- G.
Bottom |.
4 1 pc. Drawer
A ! pe
NA
Refer to later page(s) of these
instructions for drawer assembly.
J
f N
Hardware List
A = we gs
Cam Lock Screw Cam Lock M4x32 M3x13 M3x32
20 pcs. (+4 extra) 20 pcs. (+4 extra) 1 1/4" Round Head Screw 1/2" Round Head Screw 1 1/4" Flat Head Screw
2 pcs. (+1 extra) 12 pcs. (+1 extra) 8 pcs. (+1 extra)
M3x19 5/32"x7/8" Knob Wooden Dowel
3/4" Flat Head Screw Machine Screw 1 pc. 4 pcs. (+1 extra)
_ 2 pcs. (+1 extra) 1 pc. y
Tool(s) required for assembly: Phillips screwdriver, Level
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
№. 3503 / 17 / 01
( Assembly Instructions 2/7 )
IMPORTANT
e Use a soft cloth between these parts and the floor.
e Do not use power tools above 8 volts to assemble.
e Do not tighten all the screws until each part is properly assembled.
e The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into the pre-drilled
holes of Top (A), Side Panels (B), (C)
and Front Rail (E).
b <— Cam Lock
8 <— Cam Lock
|
|
©
Figure 1
STEP 2
Attach Front Rail (E) to
Bottom (G) with Cam Locks.
(See Figure 1)
NS. 3503 / 17 / 01
( Assembly Instructions 3/7 )
STEP 3
Attach Front Rail (D), Back Rail (F)
and unit to Side Panel (B) with
Wooden Dowels and Cam Locks.
Y <— Cam Lock
L
Wooden Dowel
"
<— Wooden Dowel
|
|
> 4 <— Cam Lock
STEP 4
Attach Side Panel (C) to unit with
Wooden Dowels and Cam Locks.
№. 3503 / 17 / 01
( Assembly Instructions 4/7 )
STEP 5
Attach Top Panel (A) to unit with Cam Locks
and 1 1/4" Round Head Screws.
Cam Lock
1 1/4" Round Head Screw
STEP 6
To level unit, adjust the adjustable
levelers on the bottom of unit.
(See Figure 2)
Note: Unit must be level to work properly.
Attach Back Panel (H) to unit with
1/2" Round Head Screws.
1/2" Round Head Screw ——>» ev”
Figure 2
№. 3503 / 17 / 01
( Assembly Instructions 5/7 )
STEP 7
Attach Drawer Sides (13) and (14) to Drawer Back
(12) with 1 1/4" Flat Head Screws.
Roller at back
STEP 8
Insert Drawer Bottom (15) into the groove.
Attach Drawer Front (11) to unit with
1 1/4" Flat Head Screws.
STEP 9
Attach Knob with Machine Screw.
Note: Drawer assembly is not complete until 3/4” Flat Head Screws are used in a later step.
a , >
Part List
11. J] 12. I Г 13. L 14. 15.
Drawer Front Drawer Back Drawer Side Drawer Side Drawer Bottom
1 pc. 1 pc. 1 pc. 1 pc. 1 pc.
N J
№. 3503 / 17 / 01
( Assembly Instructions 6/7
STEP 10
Loosen slightly the screws pre-installed on
the back of the drawer front.
STEP 11
Insert the drawer into the unit, then adjust
the drawer front panel left or right and up or
down until the drawer gaps look proportional.
STEP 12
Pull the drawer open slowly and re-tighten the screws from Step 10.
Make sure the front panel does not move and lock the drawer front panel into position with
3/4" Flat Head Screws.
Note: These 3/4" Flat Head Screws must be installed to complete the drawer assembly.
1<— 3/4" Flat Head Screw
|
|
|
|
NS. 3503 / 17 / 01
Assembly Instructions 7/7 )
STEP 13
Slide Drawer (I) into place.
/
7
М
/
Y
NN
/
\
CARE INSTRUCTIONS
NEVER | | NEVER
allow liquids to remain on furniture. use glass cleaners on
Absorption causes parts to warp finished furniture. Ammonia
and split and finishes to delaminate. chemically attacks the finish.
N J N
X
Do not write
directly on surface.
PREVENT
MARKING
MW
Do not place
in direct sunlight.
PREVENT
FADING
=]
Do not use rubber
based placemats.
PREVENT
DISCOLORING
5
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
LY
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
N J
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319