Assembly Instruction Please be careful when unpacking the item to ensure you do not accidentally cut, scratch or damage the item. 1. Lay out all Parts on a flat surface over a carpeted area, you will need enough room to display all parts before initiating the assembly process. 2. Open the hardware bag and identify each piece carefully. WARNING! Do not use power tools to assemble the item, the hardware inserts might get damaged if over tightened. Tip! The secret of a stress free assembly is to lay out all the parts from the get go! 15204 Page 1 of 4 Wooden Parts List (A) B © D © ® q ua DD PARTS| ——. \ Л A| ® | QTY 1 1 1 1 © H © PARTS| |. | ‘ AN QTY 2 1 1 Hardware List 1) (2) (3) 4) (6) PARTS| Do | pom | mm Com A QTY 4 5 8 8 D 4 7 (9) Tool required PARTS — | © | A QTY 12 2 1 NOT INCLUDED © Tip! The secret of a stress free assembly is to lay out all the parts from the get go! 15204 Page 2 of 4 STEP 1 Do not fully tighten until the cabinet is completely assembled. | STEP 2 STEP 3 _e STEP 4 Do not over tighten! | [+ the hinges. Slide the doors down carefully connecting | 15204 Page 3 of 4 STEP 5 xi nl The location of the a es 0 magnets may be 1 #1 7 ladjusted to level the o © ° | |doors closing STEP 6 / \ a Install all four feet on legs and adjust as needed. 15204 Page 4 of 4
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021