YARDGARD 330250WBG 4 ft. H x 250 ft. W Beige Economy Vinyl Fence Weave Installation instructions

INSTALLATION INSTRUCTIONS
1. TO DETERMINE HOW MANY ROLLS ARE NEEDED,
JUST FOLLOW THIS EASY FORMULA: HEIGHT OF
FENCE X LENGTH OF FENCE + 40 = # ROLLS.
2. UNCOIL THE END OF FENCE WEAVE® AND
MEASURE AGAINST FENCE DIAGONALLY. CUT
STRIPS 3 INCHES LONGER TO ALLOW FOR 1 1/2"
OVERLAP ON EACH END. (DIAGRAM 1)
3. STARTING AT EITHER TOP OR BOTTOM OF FENCE,
LACE FENCE WEAVE® OVER ONE AND UNDER
THE NEXT WIRE RUNG OF FENCE. (DIAGRAM 2) CN
Л
4. FOLD OVER THE 1 1/2" OVERLAP AND PUSH WS % 3
FASTENER (INCLUDED) THROUGH FENCE WEAVE® Z A EE L
SPREADING PRONGS TO SECURE. (DIAGRAM 2)
3. TIGHTEN OPPOSITE END TO TAKE OUT MOST OF THE SLACK
(CAUTION: LEAVE 1/2" SLACK FOR SHRINKING) AND INSERT FASTENER.
REPEAT STEPS 1 THROUGH 5 UNTIL FENCE IS COVERED. COMBINE 2 OR MORE COLORS
TO CREATE YOUR OWN DESIGNS. (DIAGRAM 3)
hy я
N
DIAGRAM 3
">