Allied Brass SL-20-3-SBR Shadwell Collection 3 Position Robe Hook installation Guide

SL-20-3
INSTALLATION INSTRUCTIONS
Step1: Drill Holes in Wall for screws or screw anchors
Determine your desired location for installation .Make a mark on the wall where each mounting screw will be placed as
shown below. Making sure unit is level. Drill a hole on each mark.
60.33 mm / 23 8 in
63.50 mm / 21 2 in
60.33 mm / 23 8 in
Step2: Attach unit to Mounting Surface.
DRILLED HOLE
ANCHOR
THREADED INSERT
SCREW
CARD-58(CAP)
No portion of this document or any artwork contained herein should reproduced in any way without the written consent of ALLIED BRASS INC.