Fresca FCB6148ES-VSL-D-CWH-V Lucera 48 in. W Wall Hung Bath Vanity in Espresso with Quartz Stone Vanity Top in White with White Basins Installation Guide

Fresca FCB6148ES-VSL-D-CWH-V Lucera 48 in. W Wall Hung Bath Vanity in Espresso with Quartz Stone Vanity Top in White with White Basins Installation Guide
©
FRESCA
> Cid
[COLLECTION]
LUCERA
FVN6148-VSL-D
INSTALLATION GUIDE
CONTENTS:
Medicine Cabinet
Cabinet
Sink
Counter Top
FMC8010
FCB6148-VSL-D
FVS6T19WH
FCT6148WH-VSL-D
PAGE 2
PAGE 5
PAGE 6
PAGE 6
7 FVN6148-VSL-D
LUCERA ©
INSTALLATION GUIDE FRESCA
=.
FMC8010
Medicine Cabinet
Front
FVN6148-VSL-D
Vanity Ensemble
Front
FCB6148-VSL-D
Cabinet Front
VS6119WH
Sink Front
FCT6148WH-VSL-D
Counter Top Front
A FCB6148-VSL-D
Cabinet Back
Е
a
WN
Eg
— 3
Ба
A
«с
>All dimensions & specifications are approximate and subject to change without notice.
® FVN6148-vSL-D | | UCERA | INSTALLATION GUIDE | PAGE;
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
FVN6148-VSL-D
„=> LUCERA ©
INSTALLATION GUIDE FRESCA
TOOLS FOR ASSEMBLY
C0 8 ED SE
1/8" Drill Bit
SUPPLIED PARTS
[A] Dj del UE le) EH U [x]
MEDICINE CABINET DIMENSIONS
Your item may appear slightly different from illustration.
Model SKU Width EN Height El Depth
SIDE BRACKET
FMC8090 |29.5" 26" 5"
So SIDE MIRROR
ANCHOR FIN
~
MOUNTING | H |
BRACKET
(top)
ФД
ANCHOR \ N |
MOUNTING| 1 SMALL SCREW
BRACKET =
(bottom)
© TEIN
#8 x 13/8” Flat Head Screw
INSIDE GLASS SHELF
WARNING:
Risk of property damage. Use anchors rated
for the loaded weight of the product. Refer
to the anchor manufacturer’s instructions.
® FVN6148-vSL-D | LUCERA | INSTALLATION GUIDE | Pace?
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
FVN6148-VSL-D
LUCERA
INSTALLATION GUIDE
©
FRESCA
MEDICINE CABINET SURFACE MOUNT INSTALLATION
IMPORTANT:
Consult an expert for the proper
screws/bolts to use when
attaching to various constructions.
Screws provided do not attach to
all wall construction types.
Anchors are not required if
brackets are installed in stud.
Attach bottom
bracket to the
wall.
With assistance, rest the medicine
cabinet on the bottom mounting
bracket and hold it in place.
Drill the holes Insert the
in the wall with anchors in the
a 3/16" drill bit. holes.
Level and
mark.
Level and mark the medicine
cabinet’s location on the wall
from point a to point b.
Hold the medicine cabinet (A) while it’s
placed on the bottom bracket, then
secure by fitting the top bracket (H) on
top of the medicine cabinet, and attach
the top bracket (H) to the wall.
Align mirrored side panels (C) to
each side of the medicine cabinet.
Attach mirrored side panels to the
medicine cabinet using a screwdriver
and provided screws (D).
SHELVES INSTALLATION
M ta
Push a side of the shelf (E)
into left or right pins (J).
Snap the shelf (E) down into
the opposite side.
Fill remaining holes with
the plugs (K).
Push and twist the snap-
in pins (J) into place.
® FVN6148-vSL-D | LUCERA | INSTALLATION GUIDE | PAGE3
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
7 FVN6148-VSL-D
> LUCERA ©
NZ INSTALLATION GUIDE FRESCA
MEDICINE CABINET RECESS MOUNT INSTALLATION
C
N
У === === === = = =
-------------
XV
Cut the marked perimeter
with appropriate tool.
Draw the perimeter of the Place and hold the medicine
medicine cabinet on the wall. cabinet in the cutout opening.
4 STEPS TO FRAME THE CUTOUT OPENING
Frame the cutout opening.
ROUGH IN DIMENSIONS
Model SKU Width A Height B Depth О Г
FMC8058 19.5" 26" 5"
FMC8090 | 29.5" 26" 5" О О
FMC8010 39.5" 26" 5"
a NN
Ne a. b. À
a. Push a side of the glass shelf b. Snap the glass shelf (C)
(C) into left or right pins (J). into the opposite side.
c. Fill remaining holes with the plugs (K).
OPTIONAL DOOR ADJUSTMENT:
This screw allow you to
7 А» adjust pitch side to side.
#8 x 1 3/8"
This screw releases cabinet’s
door and allows up and down
@ adjustment.
Level, then secure the medicine Choose the position for your This screw allow you to adjust
cabinet with the screws (G) shelves then push and twist the the gap between doors.
through the mounting holes into snap-in pins (J) into place.
the framing studs.
Illustration A.
® FVN6148-vSL-D | UCERA | INSTALLATION GUIDE | PAGE 4
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
FVN6148-VSL-D
= | UCERA ©
7 INSTALLATION GUIDE FRESCA
9
/d
Ÿ
CABINET INSTALLATION
1 | Place cabinet (D) in designated location and 2 | Attach wall brackets (E) to
mark the bracket position on the wall.
the wall with the screws (F).
EL
LI
TNA
© sams
#8 13/8" FLAT HEAD SCREW
//
//
28" to 32"
IMPORTANT: Consult an expert for the proper
screws/bolts to use when attaching to various
constructions. Screws provided do not attach
to all wall construction types. Anchors are not
3 | Apply a bid of silicone and hang the required if brackets are installed in stud.
cabinet (D) on the brackets (E).
4 | Attach the handles to cabinet.
@ FVN6148-VSL-D LUCERA | INSTALLATION GUIDE | PAGES
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
7 FVN6148-VSL-D
LUCERA ©
INSTALLATION GUIDE FRESCA
CABINET INSTALLATION
5 | Apply a bead of silicone on top of the 6 | Apply a bead of silicone on the top of
cabinet. Place counter top on the cabinet. counter top and the bottom of the
sinks. Connect sinks to the counter top.
DRAWER REMOVAL & INSTALLATION
DRAWER REMOVAL DRAWER INSTALLATION
@ FVN6148-VSL-D LUCERA | INSTALLATION GUIDE | PAGE 6
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
7 FVN6148-VSL-D
> LUCERA O
Y INSTALLATION GUIDE FRESCA
P-TRAP AND POP-UP INSTALLATION INSTRUCTIONS
mun NOTE: — SINK
Your item may
appear slightly _
different from B POP-UP
the illustration.
MOUNTING RING Se в BRASS NUT
RING == = RUBBER WASHER
Nn?
DRAIN PIPE (E TAIL PIPE
MOUNTING RING 2 SS —a RUBBER WASHER 2
RUBBER WASHER P-TRAP
CLEAN OUT PLUG бо RUBBER WASHER 3
POP-UP INSTALLATION INSTRUCTIONS
Ve ENS WU ENS
WITHOUT OVERFLOW WITH OVERFLOW
© FVNG148-VSL-D | LUCERA | INSTALLATION GUIDE | PAGE 7
02019 FRESCA" All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
7 FVN6148-VSL-D
2 LUCERA ©
NZ INSTALLATION GUIDE FRESCA
P-TRAP INSTALLATION
1 | Install tale pipe (G).
2 | Connect P-trap (J).
® FVN6148-vSL-D | _LUCERA | INSTALLATION GUIDE | PAGES
©2019 FRESCA™ All rights reserved. This material may not be reproduced, displayed or distributed without the express prior written permission of the copyright holder.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement