Commercial Electric 12-Port Category 5e Mini Patch Panel installation Guide
Advertisement
Advertisement
Item #637426
Model #5112
Installation Guide
Cat 5e Mini 12-Port Patch Panel
PACKAGE CONTENTS
A - Cat 5e Mini 12-Port Patch Panel
B - 89D Mounting Bracket
TOOLS NEEDED
Screwdriver
110 Punch-down Tool
Installation
1
□
MOUNTING THE BRACKET AND PATCH PANEL
Mount the 89D bracket (B), then mount the patch panel (A) into the bracket backwards (i.e. the modular jacks should be facing the mounting surface). This will hold the assembly in place when terminating the associated cables.
2
□
PLACING THE WIRES
Begin routing the cables into the patch panel assembly. Cables must be routed between the rows of IDC connecting blocks. This will ensure a proper fit when the assembly is returned to its proper position in the
89D bracket.
B
3
□
TERMINATING THE CONNECTION
Terminate the individual conductors using a 100 punch-down tool.
4
□
TRIMMING THE WIRES
Use wire cutters to remove the excess wire.
14RS
E333898
LISTED RoHS Compliant

Public link updated
The public link to your chat has been updated.
Advertisement