DS-1273ZJ-130(-TRL)
Wall Mounting Bracket for Dome Camera
(with adaptor plate)
Features:
Aluminum alloy material with surface spray treatment
The outlet hole makes the feature looks better
Better water proof design
Convenient installation coordinating with lower bowl
Dimension:
83.5
46
φ
13
2
6-M4深8
4-
φ
8.
5
228.5
Order Model:
DS-1273ZJ-130(-TRL)
Parameter:
Model
Parameters
Appearance
Range of
Application
Material
Dimension
Weight
DS-1273ZJ-130(-TRL)
Wall Mounting Bracket for
Dome Camera (with adaptor plate)
Hik White
Suitable for dome camera wall mounting
Aluminum Alloy
132×183.5×228.5mm
870g
Notice:
The bracket should be installed on flat wall
The wall must be capable of supporting over 3 times as much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
Model Suitable:
DS-2CE5582P(N)-VFIR3,DS-2CE55A2P(N)-VFIR3,
DS-2CE55C2P(N)-VFIR3, DS-2CC5282P-IT3,
DS-2CC52A2P-IT3, DS-2CC5X2P(N)-IR1(IR3)
DS-2CC51X2P(N)-IR1T(IR3T),DS-2CC5182DP-IR1(IR3)
DS-2CC51X2P(N)-IR1(IR3), DS-2CD2312-I,DS-2CD2332-I
85.7
120
Unit : mm
Installation Step:
① Choose the appropriate wall to fix the bracket and wire
② Fix cap to bracket and complete wiring
③ Screw up and fix the cap ④ Take adaptor from the packaging of bracket
A: Cable entry hole
⑤ Check the hole site and fix adaptor to cap
B: Fastening screw
⑥ Connect the cable and fix dome camera to cap
⑦ Rotate the dome camera moderately and screw up the fastening screw
C: Bayonet of adaptor
⑧ Installation complete
D: Fastening screw of dome camera
Note: The actual bracket may vary from the picture above.