Kenuco DS-1663ZJ Surveillance Housing & Mounting Bracket User Guide

DS-1663ZJ
Ceiling Mounting Bracket Indoor/Outdoor
Order model:
Features:




Aluminum alloy material with surface spray treatment
General design for indoor/outdoor
Design of cable entrance hole
Complementary rubber blanket pad for waterproofness
Dimension:
DS-1663ZJ
Parameters:
Model
Parameter
Color
DS-1663ZJ
Pendent Mounting Bracket In/Outdoor
Hik white
Suitable for speed dome ceiling mount
(not suitable for DS-2AE-714）
Aluminum alloy
Φ116.5×57mm
380g
Feature
Material
Dimension
Weight
Notice:



The bracket should be installed on the flat surface of a
wall
The wall must be capable of supporting more than 3
times the total load of the camera and the mount.
The maximum load capacity of the mount is 30KG
Installation steps:
①
Choose the appropriate wall to mount the ceiling plate,
② Fix adaptor to ceiling plate
and rubber blanket should be used when assembling outdoors
Indoor
B
Outdoor
C
A
A: Waterproof rubber pad
③
Fix with tightening screw, thread the cable and
B: Tightening screw
④ Tighten up the set screw and complete the installation
Install the speed dome
D
D: Set screw
Note: The actual bracket may vary from the picture above.
C: Adaptor