SVP 5800 Camera User Guide
Advertisement
Advertisement
AQUA 5500-A Manual
IMPORTANT
- Don’t open the battery door under water.
- Close the battery door properly for best water sealing.
- Rinse the camera with clean water after used and keep it dry for storage.
1. Getting to know your camera
Digital still camera
Digital video camcorder
Built-in flash light
4x digital zoom
2.7+1.8 " TFT color display
Micro SD card support
2 x AAA alkaline batteries
2. Functional parts
9
Macro/normal switch
1 Shutter
2
Power on/off button
3
LCD switch button
4 Strap hook
5 Flash light
6 Lens
Press this button to take photographs or to start /stop recording a video clip, or to confirm changes in menu mode
Press this button to switch on and press it for at least 2 seconds to shut off, or press it to display or hide the status icon on LCD.
Press this button to switch LCD between the small monitor and the big monitor.
Hook for attaching the wrist strap to the camera.
Use the built-in flash to give the subject extra lighting if it is in dark surroundings ( the best flash distance is recommended within
1.5m).
Records the image to be taken.
Note: Keep the lens clean. Dirt and fingerprints will affect the quality of the picture.
7 Busy indicator When the indicator is blinking, the camera is busy.
8 Small monitor Use the small monitor to take photos of yourself
Macro mode: Select this mode to take close-up photographs (distance 11cm - 18cm).
Normal mode: Select this mode to take photographs from
0.5m - infinity.
10 LCD screen
11 Up/Tele
12 Down/Wide
13
Left / Flash light
Display photographs, video clips, camera setting and menu.
In Preview mode: press this button to Tele (zoom in);
In Menu mode: press this button to up the selection bar.
In Playback mode ( photo ) : press this button to zoom in.
In playback (Video playing) mode: press it to start/pause the video.
In Preview mode: press this button to Wide (zoom out);
In Menu mode: press this button to down the selection bar.
In Playback mode ( photo ) : press this button to zoom out.
In Playback mode: press this button to get into the thumbnail mode
In Menu mode: press this button for the left selection;
In Playback mode: press this button to the previous one;
In Photo infinite Preview mode: press this button to switch Flash modes; (the flash light cannot be used in macro mode )
In Photo (zoom in) Playback mode: press it to move to the left area of the photo.
In playback (Video playing) mode: press it to fast rewind.
14
15 Mode Switch
16 Menu / Delete
17
Tripod connector
To fix the camera on the tripod.
18 USB interface
Via this connection, you can download photographs and video clips to a computer.
19
20
Micro SD card slot
Battery compartment
SD card storage location.
Compartment for 2 x AAA alkaline batteries
3. Explanation of the status icons
Item
1
2
3
Right /
Playback
Press this button to get into Playback mode;
In Playback mode: press this button to the next one;
In Menu mode: press this button for the right selection;
In Photo (zoom in) Playback mode: press it to move to the right area of the photo.
In playback (Video playing) mode: press it to fast forward.
Press this button to switch between movie and still capture mode;
In Playback mode: press this button to exit.
In Photo (zoom in) Playback mode: press it to move to the up area of the photo. In playback (Video playing) mode: press it to stop the video.
In Preview mode: press it to enter the settings Menus.
In Playback mode:
Press it for a short time to enter “ Delete single/ all files ” mode;
Press it for a long time to enter file compiling and system setting menu. In Photo (zoom in) Playback mode: press it to move to the down area of the photo.
Function Description
Photographs mode.
Mode selected
Videos mode.
Flash indicator
Force flash: The flash is on in any environment.
Auto flash: The camera determines if the flash should be used or not.
No flash: The flash is turned off.
Normal/Macro mode indicator
Mode (0.5m – infinity).
Macro mode (11cm – 18cm).
Resolution
Quality
18M pixel resolution 4928x3696
8.0M pixel resolution
5.0M pixel resolution
3.0M pixel resolution
VGA resolution
3264x2448
2592x1944
2048 x 1536
640 x 480
Super Fine/Fine/Normal Picture quality setting
White balance
Auto
Daylight
Cloudy
Tungsten
Automatic white balance
White balance selected for daylight surrounding
White balance selected for cloudy surrounding
White balance selected for tungsten lighting
ISO
Exposure
Fluorescent
White balance selected for fluorescent surrounding
Auto/100/200/400/800 Sensitivity selection
± 2.0, ± 5/3, ± 4/3, ±
Exposure setting
1.0, ± 2/3, ± 1/3, 0
On/Off Self timer setting Self Timer
Sharpness
Effect
Date Stamp
Quick View
Movie Size
White balance
Hard/ Normal/ Soft Sharpness setting
Normal/ B&W/ Sepia/
Negative/ Lomo/ Pencil
Sketch/ Red/ Green/
Blue/ Vivid
Effect setting
On/ Off
On/ Off
VGA 640 x 480
QVGA 320 x 240
Auto
Date stamp setting
Quick view setting
Video resolution setting up
Daylight
Cloudy
Automatic white balance
White balance selected for daylight surrounding
White balance selected for
Tungsten cloudy surrounding
White balance selected for tungsten lighting
Sounds
Fluorescent
Off/On
White balance selected for fluorescent surrounding
Sounds setting
Select power frequency in
Frequency
Power Save
50Hz / 60Hz your location
Off / 1Minute / 3 Minutes Auto power off selection
Language
Date/Time
English/ French/
Deutsch/Italian/Spanish/
Portuguese/Japanese
YY/MM/DD
Display language selection
Format Yes/No
Reset All Yes/No
Version
Date or time setting
Format the memory location selection.
Reset all setting
Note: The camera will remain the last setting when it is turned off.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera.
3. Close the battery door.
4
5
6
7
8
9
Self-timer
Selected resolution
Picture quality
Battery indicator
Zoom indicator
The micro SD card indication
White Balance
Shows selected Self-timer setting
18M = 4928x3696; 8M = 3264x2448;
5M = 2592x1944; 3M = 2048x1536;
VGA = 640x480
Super fine.
Fine.
Normal.
The batteries are full.
The batteries are empty.
Shows the zoom ratio in preview mode
The micro SD card is inserted and will be used as storage for PHOTO and VIDEO
Shows selected White-balance mode. 10
11 Photo/Video counter
Photo mode: No. of pictures that can be taken.
Video mode: Recording time in seconds.
4. Details for camera setting
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. The memory can be gained with a micro SD memory card (not included).
Follow the instructions below to insert the optional micro SD memory card into the camera.
1. Turn off the camera first.
2. Open the battery door (please make sure the battery door was unlocked before open).
3. Insert the micro SD card into the camera.
Note: There is only one right direction to insert the micro SD memory card into the slot. Do not force the card into the memory card-slot, it may damage both the camera and the micro SD memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the following sections for more information.
5.3 Formatting the memory or micro SD card
1. Press the Menu button ( ) in PHOTO or VIDEO mode.
2. Select the setup mode by pressing the Right button.
3. Select the format icon by pressing the
W
( ) button and press the Shutter button to confirm.
4. Press the Shutter button to format the SD memory card.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press the Menu button ( ) in PHOTO mode, select the resolutions icon by the
W
( ) key and press the Shutter to confirm.
Resolutions: VGA (640 x 480) ; 3M (2048 x 1536) ;
5M (2592x1944) ; 8M (3264x2448) ;
18M (4928x3696) ;
2. Five different resolutions will be displayed. Select the desired resolution by using the Up or
Down button and press the Shutter button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera.
2. Depending on the distance to the object being photographed, use macro switch to adjust the distance. Select the flower symbol ( ) if you wish to take a close-up photograph
(11cm –18 cm).
If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set the macro switch to normal mode ( ).
3. If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing the
Flash button. (If the battery power is too low, the flash won’t be activated).
4. Use the LCD screen to aim at the object you wish to take photographs of.
5. Press the Shutter button and wait until the LCD display turns on again.
Caution: 1) Taking pictures for fast-moving object is not recommended.
2) Image may be distorted when taking pictures in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 4 times.
Zoom in or out by pressing the Up or Down button, a number will appear on the display, 4.x is the maximum zoom ratio.
5.7 Self-photographying using the small monitor
If you want to take a photo of yourself, you can simply use the small monitor LCD screen. Follow the steps below:
1. Press the LCD switch button to switch to the small monitor.
2. Use the small monitor as a viewfinder to aim at yourself.
3. Press the Shutter button to take the photo of yourself.
5.7 Self-timer setting
You can also use the self-timer function when you take a photograph of yourself or when you take a photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1. Set the camera to photo mode.
2. Press the Menu button ( ). The menu will appear.
3. Press the
W
( ) button to select Self Timer and confirm by pressing the SHUTTER button.
4. Press the
W
( ) button to select the “On” option
5. Press the Shutter button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photos of.
7. Press the Shutter button to take a photograph.
8.
The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will beep during the delay time.
5.8 Recording video clips
1. Press the Mode button to select the video clip mode ( ).
2. For setting the resolution, Press the Menu ( ) button and select Resolution, then press the
Shutter button to confirm. Two resolutions will be displayed.
VGA (640 x 480), QVGA ( 320 x 240).
3. Press the Shutter button to start recording videos, press the right button to pause and press the Shutter button again to stop recording. The video clip will now be saved as an AVI file in the camera memory.
5.9 Playback photographs
The camera provides two options for playback: a) Single b) Thumbnail
1. Press the Playback ( ) button to get into Playback mode.
2. The last picture or video clip taken will be displayed. Press the W ( ) to get into the thumbnail mode. Press the Left /Right /Up /Down button to select the desired picture, and press the Shutter button to view.
3. In full screen display, press the
T
( ) button to zoom in the photo.
4. To shift the image in zoom-in mode, press the Shutter button and then use the
Mode/Menu/Left/Right buttons.
5. Press the Menu ( ) button in Playback mode, press again and hold the Menu button until the menu options displayed. Select SLIDE SHOW and set up the desired slide show way.
Press the Shutter button to confirm. The pictures saved in the micro SD card will be displayed in sequence automatically. To stop slide show, press the shutter button.
6. Press the Menu ( ) button in Playback mode, press again and hold the menu button until the menu options displayed. Select Photo Effect and press the SHUTTER button. Select the desired effect by pressing the up/down button and press the shutter button to confirm. The image will be saved as a separate image.
5.10 Protecting photographs/videos
You can prevent the photographs/videos in the micro SD card from accidental erasure.
Follow the instructions below to protect photographs/videos.
1. Press the Playback ( ) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be protected.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button until the menu options displayed. Select Protect and press the Shutter button
4. Select “Single” or “Protect All” and press the Shutter button to confirm.
5.11 Resizing photographs
A captured image can be resized to a smaller size and saved as a separate image.
Follow the instructions below to resize photographs.
1. Press the Playback ( ) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be resized.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button until the menu options displayed. Select Resize and press the Shutter button
4. Select the new size and press the Shutter button to conform. The image will be saved as a separate image.
5.12 Playback video clips
1. When video clips are displayed, press the Up button to start playing the video and press the
Up button again to pause the playback.
2. Press the Right button to fast forward or press the Left button to rewind.
3. Press the Mode button to stop and exit .
5.13 Deleting photographs and video clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in the memory.
Follow the instructions below to delete photographs/videos.
1. Press the ( ) button to enter the playback mode.
2. Press the Left or Right button to select the photograph/video clip to be deleted.
3. Press the Menu/Delete button ( ) and select “Single” or “All” .
4. Press the Shutter button to confirm.
5. Press the Menu button to exit.
NOTE: Select “All” and Press the Shutter button to confirm, all the pictures and videos will be deleted.
Photos that are protected from accidental erasure cannot be deleted. To delete photos, set photos to unprotect mode (Section 5.10), and then follow the file delete procedure.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video files for storage.
7. Specifications
Image resolution
Lens
Focus range
Macro mode
Digital zoom
Flash strobe
LCD display
White balance
Video mode
External memory card
File format
Self timer
PC interface
Power source
18.0 Mega pixels:(4928x3696)
8.0 Mega pixels: (3264X2448)
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
VGA: (640x480)
F/2.8 f = 4.8mm
0.5m. ~ Infinity
11cm – 18cm
4x
Built-in ( Auto / force / off )
2.7+1.8" TFT color display
Auto / Daylight / Cloudy / Fluorescent / Tungsten
30fps@VGA / 30fps@QVGA with micro SD card
Supports SD cards up to 32GB
Picture: JPEG, Video: AVI
10 seconds
USB 2.0
2 x AAA alkaline batteries
8. System requirement
Operating system
CPU
RAM
Interface
WinXP (SP3) 、 or above
Pentium III or above
At least 64MB
USB port
9. Troubleshooting
Problem Cause Solution
Cannot turn on the camera
Photos can not be saved when taking pictures.
Low battery power.
Battery placed at wrong polarities.
The memory card hasn’t been formatted properly.
Replace or install the battery correctly.
Cannot find removable disk after connecting the camera to the computer
.
Flash does not work.
Connection failure.
Battery power is too low.
Format the memory in setup mode of the camera. Please refer to section 5.3.
Make sure all cable connections are secured and restart the computer if necessary.
Replace with new 2 x AAA alkaline batteries
The batteries used up very fast.
The photos are blurry
Incorrect or old, used up, battery
1. The camera is not held steadily
2. The lens of camera is dirty.
Replace with new 2 x AAA alkaline batteries
1. Hold the camera steadily until it beeps when taking video photo.
2. Clean the lens with soft dry cloth.
For EU only
AM-8Q4-SVP-1

Public link updated
The public link to your chat has been updated.
Advertisement