Official Support: [email protected]
APEMAN C370 Detailed User Guide
Contents
1. How to Install the Dash Cam C370 ...............................................
- 0 -
2. Prepare a Compatible Memory Card .............................................
- 1 -
A. Get a Right SD Card .....................................................................
- 1 -
B. How to Format a New SD Card Using Your PC ..................
- 2 -
C. How to format the SD card on the Dash Cam ...................
- 4 -
3. Getting to Know the Camera Body ................................................
- 5 -
A. Interfaces .........................................................................................
- 5 -
B. Indicator Lights & Buttons .........................................................
- 6 -
C. Icons on the Screen .....................................................................
- 7 -
4. Getting to Know the Operations .....................................................
- 8 -
A. Camera Settings & System Settings .....................................
- 8 -
B. How to Start Recording ............................................................
- 12 -
C. How to Stop Recording .............................................................
- 13 -
D. How to Switch to Photo Mode ................................................
- 13 -
E. How to Check and Reply Videos on Dash Cam ...............
- 15 -
Clarification: This document is a detailed operating instruction, which is different from the physical user manual in the box.
- 0 -
Official Support: [email protected]
1. How to Install the Dash Cam C370
Please visit the APEMAN Official YouTube Channel and watch this video on how to install the Dash Cam. It will get you through setting up the
C370 and will cover the basics.
Channel: APEMAN Official
Section: Dash Cam Tutorial
Video Title: Apeman Dash Cam C370 Operation Video
1.
Prepare a Compatible Memory Card
A. Get a Right SD Card
For best results, we recommend purchasing microSD cards from well-known memory cards brands (such as Samsung, Kingston, etc) for your Dash Cam. There are many memory cards manufacturers on
- 1 -
Official Support: [email protected]
the market and each manufacturer uses slightly different file settings and systems that varies between batches. As such the performance of memory cards from non-known manufacturers cannot be guaranteed and recommended by us.
Requirements for card specifications:
Type: microSD
Capacity: 32GB is recommended; 64/128 GB can be used as long as the card can be formatted to FAT32 file system
Speed Class: 10 or above
B. How to Format a New SD Card Using Your PC
If you have just purchased a New SD Card to use with the Dash Cam, we recommend attempting to format it on your computer first even though in most of the time the new card is completely empty.
Some new SD Cards have files from the manufacturer and they also need to be formatted.
Follow the instructions below to format the SD card on your computer.
- 2 -
Official Support: [email protected]
Windows:
1. Insert the SD card into your computer. You may need a card reader for this.
2. Open File Explorer and locate the drive letter for your SD card.
Right-click the drive and select Format .
3. Set the File System to FAT32 . Select Start to begin.
4. Select OK to begin formatting the card.
- 3 -
Official Support: [email protected]
MAC:
1. Insert the SD card into your computer. You may need a card reader for this.
2. Open Disk Utility . To do this, click on the magnifying glass in the top-right corner of your computer screen. Type “disk utility” in the search box that opens, then click on the “Disk Utility” application that comes up.
3. Find the card in the left side of the window.
4. Click the ERASE tab in the middle of the window.
C. How to format the SD card on the Dash Cam
If this SD card is not used for the first time, you can simply format it on the Dash Cam for your convenience. Although formatting the SD card on your computer is recommended for better results.
Follow the instructions below.
1. Insert the microSD card into the Dash Cam. Please only insert the card into the slot before turning on the Dash Cam.
2. Turn on the Dash Cam and make sure it is not recording at the time.
3. Press the menu button twice to enter the System Settings .
4. Press the DOWN button to scroll down the menu until you see the
- 4 -
Official Support: [email protected]
"Format" option.
5. Press the POWER/OK button, and press DOWN button and the
POWER/OK button again to select Confirm .
2. Getting to Know the Camera Body
A. Interfaces
There are 4 interfaces:
Hard Reset Hole: If your camera doesn't turn on while charging, you can insert the pin provided into the pinhole for about three seconds. This will hard reset the camera. If the camera can be turned on, you can reset it in the menu.
MicroSD Card Slot: Slide the compatible card into the slot in the right direction (with the metal contact going into the slot first and away from you) until it clicks into place. If you feel the SD card cannot be inserted into the place, please use your fingernail to push the card in.
Mic: Microphone
Micro USB Port: This should be connected to the micro USB connector of the car charger cable provided in the package. The other end of the car charger cable is connected to the cigarette lighter.
- 5 -
Official Support: [email protected]
B. Indicator Lights & Buttons
There are 3 indicator lights, from left to right:
REC: The Rec light (orange light) flashes when the camera is recording.
- 6 -
Official Support: [email protected]
POWER: The Power light (red light) is on when the camera is connected to a power source.
MIC: The Mic light (blue light) is on when the Audio is turned on.
There are 4 buttons, from left to right:
POWER: also the OK button
UP
DOWN
MENU: also for Mode Switch or Manual Lock
C. Icons on the Screen
Please note that the enabled functions shown on the screen below are just to show you the icon of each function. The settings of the dash cam below are not our recommended settings. We have set the recommended settings for this product as default.
- 7 -
Official Support: [email protected]
In a counterclockwise direction, these icons are:
1
2
4
Recording Mode (in contrast to Photo Mode)
Loop Recording (the blue figure is 3 means the recording time period is 3 minutes)
3
Exposure
Motion Detection (this is shown when the function is turned on)
5
6
7
8
9
10
11
12
13
Audio (red slash means the audio is turned off)
Date & Time
Remaining battery
SD Card (this is shown when the card is inserted and read)
Video Resolution
Time of Recording
Parking Guard (this is shown when the function is turned on)
Wide Dynamic Range
Locked Video (this is shown if the video is locked)
3. Getting to Know the Operations
A. Camera Settings & System Settings
- 8 -
Official Support: [email protected]
The menu of this product consists of two menus:
Camera Settings (a.k.a. Function Settings)
System Settings
1. About Camera Settings
Turn on the Dash Cam, press the MENU Button ONCE to enter the
Camera Settings.
Below is how the Camera Settings Menu looks like. You are able to change the settings for the following functions by entering the camera menu:
- 9 -
Official Support: [email protected]
Resolution: 1080P / 720P / VGA
Loop Recording: OFF / 1 Minute / 3 Minutes / 5 Minutes
WDR: OFF / ON
Exposure: 0 / +1 / +2 / +3
Motion Detection: OFF / ON
Audio: OFF / ON
Timestamp: OFF / ON
Gravity Sensor (a.k.a. G-sensor): OFF / Low / Medium / High
Parking Guard: OFF / ON
- 10 -
Official Support: [email protected]
Headlight Warning: OFF / ON
2. About System Settings
The System Settings is the menu to the right of the Camera Settings.
As shown below.
Date/Time: (Press OK/POWER Button to save changes)
Auto Power Off: OFF / 1 Minute / 3 Minutes
Beep Sound: OFF / ON
Startup Sound: OFF / ON
Language: 简体中文 / 繁体中文 / Deutsch / English / Français /
Italiano / Espanol / 日本语
Frequency: 50Hz / 60Hz
- 11 -
Official Support: [email protected]
Screensaver: OFF / 1 Minute / 3 Minutes
Note: If the Screensaver is set to 1 or 3 Minutes, the screen will go black if there is no manual operation for 1 or 3 minutes. As long as the
REC Light is flashing, the camera is still recording.
License Plate
This is where you input your license plate number.
Format
This is where you can format your microSD card on the Dash Cam.
Default Settings
This set of settings is our recommended setting. We strongly recommend that you use the default settings.
The default/recommended settings are:
Loop Recording: 3 Minutes
Gravity Sensor: Low
Parking Guard: OFF
Motion Detection: OFF
The Parking Guard and Motion Detection functions should be turned off while driving, because they are used for parking monitoring.
Version
When you have firmware/software upgrade related queries, it would be helpful to provide us with this version number.
B. How to Start Recording
If the Dash Cam has been successfully installed in the car, it will automatically turn on and start recording when the engine starts (for most cars on the market).
If your Dash Cam does not automatically start and start recording when the engine starts (this usually depends on your car model),
- 12 -
Official Support: [email protected]
please press the POWER/OK button to turn on the camera manually.
Then press this button again to start recording.
When the Dash Cam is recording, REC Light in the upper left corner of the camera flashes, and a flashing Red Dot appears in the upper left corner of the screen. As shown below.
C. How to Stop Recording
When the Dash Cam is recording, simply press the the POWER/OK button to stop recording. For most cars (this also depends on the model), the camera will automatically stop recording and shut down when the engine goes off.
D. How to Switch to Photo Mode
The MENU button is also a MODE SWITCH button.
Turning on the
Dash Cam, then long press the MENU button to enter the Photo
Mode . You can take photos from here by pressing the POWER/OK button.
- 13 -
Official Support: [email protected]
Under the Photo mode, short press the MENU button to enter its
Camera Settings and System Settings (which are different from the mentioned Camera Settings and System Settings under the Video
Mode). The two settings menus are shown below.
- 14 -
Official Support: [email protected]
Under the Photo mode, long press the MENU button to access to the photos that have been taken.
Then you are able to delete or manually lock it by short pressing the MENU button from there.
E. How to Check and Reply Videos on Dash Cam
Turning on the Dash Cam, then long press the MENU button to enter the Photo Mode. Long Press it again to access to your video recordings.
The operations of Delete or Manually Lock videos are the sames as the Photo Mode.
If you would like to delete a locked video, you must unlock it manually from there first.
Further questions are very welcome
Any advice would be appreciated
- 15 -