Feel free to enjoy your Turntable Feel free to use your Turntable
Known your player highlight function 12. Power adaptor jack
- LP, USB, Bluetooth, Sec. /D. Card ( or Card for short as blow) playing 13. RCA output jack
function switch freely (for active speaker) —
- Treble and Bass adjusted lovely 14. Aux in jack ( -- о © ОО |
- пытали es for BT, USB, Card song playing automatically (connect with smart — y
. charging(5v 4 43
- Voice prompts for BT status phone or computer) 7
Let us start to enjoy now
Press the Power button(9), the player starts to work while voice reminding and LED- Light indicator(11) instruction
blue light and Bluetooth d as default when i ized state by adaptor.
W О e К 0 D E R Please KNOW below description to better de on In an energized state by adaptor Light indicator color Working status Light indicator color Working status
1. Card slot 6. Auto and manual stop sel. switch Blue Bluetooth mode Red Le adjustment
Short corner down and electrical inter— 7. USB lot( playing 8: charging) Color follow the | Headoh |
ace surtace to the le 8. LP speed sel. switch Green & Blue | LP disk play mode : eadphone play
2. MODE selection key 9. Power on/off and volume control pay playing mode mode
LP, USB,Card, Bluetooth(as default Boot) -Short time knob press to power on
| Purple Card play mode Green Aux in play mode
3. »»i Next song -Long time knob press to power of Color follow the
4. 1«« Previous song -Rotate L/R to turn up/down the vol Green & Blue | USB play mode playing mode Line out play mode
5. pone Pause/ Play 10. Headphone jack : B just t ,
Treble or bass play selection 11. Light indicator Green Status djustmen NOTE: Light Flash | Max or Min reached
BT/LP/SD/USB operation quick instruction----MODE selection key(2)
— Working Operation
TU I nt a D | e = N status Status Quick instruction’
BT mode as default. You can here the voice prompt to
1 ask pairing your BT device. Once paired, voice prompt
Power on will remind you, LED-blue as well. Then lovely songs on
Ё we Bluetooth your BT device will be transferred to turntable to sound
4 o 2 1 | play and control. (BT Name: BK3254)
A | O 3 mode Press MODE button.
Oo 4 Plavi It shows enter to BT mode successful once Voice
| 5 5 aying prompt and LED-Blue. Then pairing your BT to play
+ 1-1 -.¢g your lovely songs.
LP disk Press MODE button.
[J 7 2 | play Playing It shows enter to LP mode successful once LED- Green
= 8 mode &Blue. Then operation base on "How to play the LP disk "
No card Insert Card(Short corner down and electrical interface
inserted surface to the left) , and card song will be played
9 3 Sond automatically under player works on
© 10 mode Card Press MODE button under other play mode. it shows
= inserted enter to Card mode successful once LED-Purple.
= 11 No USB Insert USB, and USB song will be played automatically
Made in China ; д USB play inserted under player works on
www.codi-tech.net mode USB Press MODE button under other play mode. it shows
inserted enter to USB mode successful once LED-Green & Blue.
WOCKODER
| Warranty Card |
| Model Number
| [Date of Purchase| |
Customer Dealer
Name Name and Address
QA PASSED
Address
CODI TECH WARRANTY
1. Warranty Terms
Within 7 days from the date of purchase, any complaints caused by product's performance problems under
normal operation conditions, without overhaul, can be accepted by replacing the product by the same type of
new one or maintenance service.
Within 1 year from the date of purchase, any complaints caused by product's performance problems under
normal operating conditions, without overhaul, can be accepted by maintenance service.
Within 3 years from the date of purchase, any complaints caused by product's performance problems, can be
accepted by fee-based maintenance service.
2. This warranty card automatically expires under the following circumstances. But
customer can still enjoy fee-based maintenance services.
a) No “wockoder” trademarks disqualified products.
b) Disassembling, replacing the failure product without authorization.
c) The product with series number missing or altered.
d) The fault or damage caused by man-made or abnormal operations.(subject to the environmental with
too wet or too dry, unstable voltage or current, zero ground voltage is too larger, etc.)
e) For all damages from outside force including liquid ,crack, improper plugging, insect pests, etc.
f) Natural consumption.(the nature consumption of shell, patch components, wear and aging).
g) Damage caused by force majeure (e.g. fire, flood ,earthquake and other disasters).
The fault caused by software operation outside the scope of CODI TECH permission.
i) The failure product NOT belonging to CODI.
=
—
3. Maintenance Service Notices
User must send the product for repairing or maintenance. Before sending it, please contact the post-sales
department of CODI to ascertain the cause of fault and fill up the maintenance application form.
The original or a copy of purchase voucher(invoice) is needed when consumer sends the product to
CODITECH. The service of "warranty" or "maintenance" is applicable to electrical components only(hardware
board).It does not include the shell, manual, packing or other accessories.
4.Particularly Declaration
CODI TECH shall NOT be responsible for any mechanical failure or a result of direct and indirect losses
caused by software problems. The native consumer is protected by the consumer protection laws of his local
country. If consumer buys product in a foreign country, the consumer must follow the foreign country's
consumer protection law.
Interpretation of this warranty card owned by CODI TECH.
www.codi-tech.net
How to play the LP disk
1, Place a LP disk on the turntable platter and select the desired speed(33 1/3 /45/78) by
sliding the speed selection switch according to the LP disk spec.
2. Play the LP disk: Open the tone arm clip to release the tone arm. Push the lift lever
backwards to raise the arm. Gently move the tone arm to the desired slowly onto the
desired position on the LP disk to begin playing.
3. Stop the LP disk: Push the lift lever backwards to raise the arm, gently move the tone
arm to the tone arm clip. Push the lift lever forward and lower the arm slowly, then close
the tone arm clip.
Note: When the auto stop switch is turned on, the turntable will continue to spin no matter
LP playing or not.
WARNING: DO NOT MANUAL LOWER THE TONEARM ONTO
THE LP DISK TO AVOID LP DISK AND NEEDLE DAMAGE!
How to adjust the Bass and Treble
Press B>II/TONE button. Long time press button (Please keep an eye on short time
press button only for play or pause function.
Bass adjustment
First long time press above sign button under playing status, see the light indicator.
LED- Green shows successful to enter Bass adjustment status. Then, rotate the volume
control knob left/right to turn up/down the Bass volume. “TONE” program will be exited
automatically once no operation within 10 seconds.
» Treble adjustment
Twice long time press button under playing status. The light indicator color from Green
to Red, that shows successful to enter Treble adjustment status. Then, rotate the vol.
control knob left/right to turn up/down the Treble vol. “TONE” program will be exited
automatically once no operation within 10 seconds.
NOTE: Rotate volue control knob to attach the MIN or MAX of Volume/Bass/
Treble, the LED light will be flashed as indicator.
How to connect with the external speakers
You can use a right audio data line to connect between your external speakers ( active
speakers only ) and our player RCA out jack (13) on the back panel. Then the sound
will be transferred from turntable to your lovely external active speakers.
How to connect with playing device without Bluetooth
You can use a right aux in line to connect between your playing device without
Bluetooth and our player Aux in jack (14) on the back panel. Then the sound will be
transferred from your playing device to our turntable.
Turntable specification
Item
Bluetooth version V4.0
Bluetooth effective <10m
120Hz - 16kHz
function USB 5V
5Wx2
40
-10°C ~ +40°C
DC 9V 1.5A
Trouble shooting
Please enter our website (www.codi-tech.net) news page to know in detail.
How to replace the turntable needle
Removing the stylus from the cartridge
1.Place a screwdriver at the tip of the stylus and push down as shown in direction "A".
WARNING: when applying force to stylus, too much may damage or break the stylus.
2.Remove the stylus by pulling the stylus forward and pushing downward.
Installing the stylus
1.Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B” .
2.Push the stylus upward as in direction “C” until the stylus locks into the tip position.
t
©
Guide Pins (Inside)
">
