Avantree BTHS-AH8M-BLK Single Ear Bluetooth Headset User Manual

Add to my manuals
1 Pages

advertisement

Avantree BTHS-AH8M-BLK Single Ear Bluetooth Headset User Manual | Manualzz

For a Better Experience

User Manual

Smallest Bluetooth Headset

Apico

www.avantree.com

1. Product overview

1). LED indicator

2). Multi-function button (MFB)

3). Charging socket

4). Mic

2. Accessories

A. Avantree Apico headset

B. USB charging cable

C. Silicone ear buds

D. Carry Case

D. User manual

B

1.LED indicator

2.Multi-function

Button (MFB)

A

C D

3.Charging socket

- 1 -

6. LED Indicator

LED Indicator Apico Status

Blue LED flash 3 times Power on

Red LED on 1 second Power off

The Red and Blue LED flash alternate Pairing in progress

Red LED flash twice Low Battery

Red LED steady on Charging in progress

Red LED off Charging completed

7. How to reset Tadpole

Step 1 Get the headset into pairing mode.

Step 2 In pairing mode, double click MFB button to restore Apico to default setting.

8. How to charge

When the battery power is low, the LED will flash red twice and “Battery Low” voice prompt was given every 20 seconds. Please charge the headset via the supplied USB to AC adapter or PC

材质:封面 封面封底

128G

双铜

+

单色印刷

内页臻品上质

80g

高白纸

2

个小号骑马钉

大约

8

页, 尺寸

W 105 x H 75mm

USB port. It normally takes about 2 hours to fully charge. The LED will stay red when charging and will turn off when charging is complete.

Note: AC adapter requirement 5V / 500mA-2A.

9. Product Specification

• Bluetooth compliance: Bluetooth 4.1

• Support profiles: HSP, HFP and A2DP profile

• Stand-by time: 80 hours

• Music time: up to 3 hours (60% volume)

• Battery charging Time: about 1.5 hours

• Battery type: rechargeable lithium battery

• Dimensions: 23 x 20 x 23mm

• Input:5V ,500mA

• Weight: 3.8g

Note: The talk time, music time and standby time may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, music formats and environments.

For more FAQ information, please refer to support.avantree.com

- 5 -

3. Pairing / Connecting

Step 1 Ensure the headset is off.

Step 2 Press and hold the MFB for about 3 seconds until LED blinks BLUE and RED

alternately.

Step 3 Activate Bluetooth on your phone and search the new devices.

Step 4 Select “Avantree Apico” to pair and connect.

Step 5 Once paired and connected, you will hear “Pairing Completed”.

Note:

A 、 Once paired and connected, the headset will automatically connect to your phone

whenever you turn the headset on again, provided it is in range.

B 、 The headset will automatically switch itself off if disconnected over 5 minutes.

4. Multipoint – Connect with two phones simultaneously

Step 1 Pair and connect headset with the first phone as above. Then turn headset off.

Step 2 Turn on the headset and let it go into pairing mode again by pressing and holding the

“MFB” button untill the LED blinks blue and red alternatively.

- 2 -

Avantree Technology CO.,Ltd.

The 4th Floor, Yurpeng Building, NO.1019 Jiabin Rd, Luohu District, Shenzhen, Guangdong, China.

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Dispose of the packaging and this product in accordance with the latest provisions.

FCC ID : 2AITF-BTHSAH8

- 6 -

Step 3 Pair and connect headset with the second phone as above.

Step 4 Connect with the first phone manually.

Note: Once paired and connected, the headset will automatically connect the last paired device firstly and you need to manually connect with another devices.

5. How to use

Button

MFB

Power on Press and hold the MFB for about 2 seconds until the Blue

LED flashes 3 times

Power off Press and hold the MFB for about 3 seconds until the Red

LED stay on 1second

Get into pairing mode Press and hold MFB until the LED blinks alternatively

BLUE and RED

Music Play Press MFB once

Music Stop Press MFB once when playing music

- 3 -

- 4 -

For a Better Experience

www.avantree.com

[email protected]

Z-PKQG-AH8-V0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement