Automotive Integrated Electronics AIE-USBCDPLAY3 Car Stereo Receiver User Guide
Add to my manuals1 Pages
Automotive Integrated Electronics AIE-USBCDPLAY3 is an innovative device that allows you to digitize your CD collection and play it through your factory car radio. With its 12-disc internal memory, you can store and access your favorite music without the need for additional hardware or software. Digitizing your CDs is simple: just insert the CD, wait for it to be recognized, and press the record button. The AIE-USBCDPLAY3 will automatically digitize the entire disc at 3X speed. Once digitized, you can access your music through your factory radio's USB or AUX input.
advertisement
IR
PLAY3 QUICK REFERENCE GUIDE
CD SLOT
RST
POWER
RECORD PLAY/PAUSE
REFRESH EJECT
DISPLAY
DIGITIZER
MEMORY
DIGITIZING CD MUSIC TO 12 DISC INTERNAL MEMORY
To have full control and operation of your CD music from your factory radio, you must
Digitize the CD. Follow these steps to do this
Step 1 Load CD into slot. Wait for CD to be recognized. Once recognized, the CD will Auto Start.
Please allow 4 seconds to pass of Auto play before attempting to digitize.
Step 2 Once 4 seconds has passed, simply push the RECORD BUTTON and the unit will display
COPYING. The unit will give a display showing the amount of songs on the disc and which song has begun digitizing.
EX. 1-12 **This shows song 1 of 12 and song 1 is digitizing
Step 3 The unit digitizes the media at 3X speed so a 3 minute song will complete in 1 minute. Once the entire disc has completed, The unit will turn off automatically. You will be able to display and access the
CD player memory from your factory radio. Simply leave the unit in the OFF position and access your
USB or AUX input selection on your factory radio.
PLAYING MUSIC WITHOUT DIGITIZING (PLAYING REAL-TIME)
This unit is equipped with a REAL-TIME CD playback mode. On the rear of the unit, a AUX Audio
3.5mm output cable is provided. This will need to be connected to the AUX audio 3.5mm input of your factory radio.
Step 1 To play music with the CD player WITHOUT digitizing, simply load a CD into the player. The CD will auto play and once started make sure you select AUX on your factory radio. In addition, you MUST make sure the AUX audio output cable is connected to the vehicles provided AUX audio input.
**NOTE** This function will only permit controls of song changing and controls either from the
CD player itself or the provided wireless remote control.
INTERRUPTED CD DIGITIZING
If the process of digitizing is interrupted by turning off the player, the unit has LAST POSITION MEMORY whereby once you restore power to the unit, you simply push the REFRESH button on the player. The CD will resume playback then push the CIRCLE RECORD button again and it will pick up where it left off.
DIGITIZING OR PLAYBACK OF SCRATCHED OR DAMAGED CD’S
This unit is designed to read discs in fair to moderate condition as well as new. In the event the media is damaged or unrecognizable by the player, the unit will skip over that song and proceed to the next track.
Please make a note of this. Ex. A DISC may have 12 songs on it but if 4 are damaged, on 8 of the 12 will be digitized.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project