LC Prime MG050 Guitar & Bass Stands & Hanger Installation Manual

Add to My manuals
1 Pages

advertisement

LC Prime MG050 Guitar & Bass Stands & Hanger Installation Manual | Manualzz
Installation Instruction
| Diameter: 1/4" (0.7cm)
(1) Place the base plate on wall vertically to mark position of the screw
Dorill hole on the wall base on screw marking.
Note 1: use drill kit with diameter 1/4". Never use larger drill kit, otherwise
the hole will be too large to hold the wall mount tight.
Note 2: Only drill hole on concrete wall or hard wood wall. Do not mount the
base plate on plasterboard or any thin wall with thickness less than the screw
length.
(3)Push the wall anchor inside the hole, screw in the base place onto the wall.
Edge of the wall anchor will be expanded by the screw and hold tightly inside
the hole.
(4)Connect the guitar hanger with the base place, drive the little screw at the
bottom area to secure the connection.

advertisement

Related manuals

Download PDF

advertisement