TURNTABLE OPERATION STEPS NOTE: The function of this screw is for transportation purposes only. It is NOT an adjustment for the player. O <> <> ZN 45 RPM adapter is located in the A > back left corner of the unit, behind o w_/ the turntable platter. ( OPERATION STEPS 1. Plug in the unit. 2. Rotate the screw clockwise with a coin or screwdriver. 3. Remove the tone arm-rest holder. 4. Select the speed. 5. Remove the white plastic needle guard and keep it in a safe place for future use. 6. Put a record on the turntable. 7. Move the tone arm gently to the desired position over the record to start playing. At the end of record, return tone arm to the arm-rest manually. 8. At the end of each use, replace white plastic needle guard to protect needle Remove the white plastic needle guard before use The tone arm will automatically stop at the end of the record. Then you must return the tone arm to the arm-rest manually. Some records will continue to spin because this is factory preset to accomodate most record albums. It does not mean that the record player is malfunctioning or defective.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project