Esicoo wifi plug Standard Outlet User Guide

Esicoo wifi plug Standard Outlet User Guide
Troubleshooting for failure in connecting
the network(failed to add device)
1.Please make sure the device has been connected to the power source and
turned on
2.Please make sure the device has been in net-pairing status
3.Please make sure the plug,phone and router are close to each other
4.Please make sure the router password is correct
5.Please make sure the device has been added using 2.4GHz Wi-Fi band.Enable
the Wi-Fi broadcast function and do not set it to hide mode
6.Please make sure the encryption method of the router’s wireless setting is WPA2PSK and the authentication type is AES,or both are set as automatic.11nonly is not
allowed in wireless mode.
7.Please make sure the Wi-Fi name does not contain any Chinese characters
8.If the number of the router’s connected devices reach the limit,try to turn off some
device’s Wi-Fi functions and configure it again
9.If the router has enabled the wireless MAC address filter,try to remove the device
from the router’s MAC filter list to ensure the device is not prohibited by the router
to connect to the network
Connection Tip from other customer:
1.Power the plug on 10s then off
2.Plug it back and hold on 5s until hear a click and it blinks fast
3.Following the direction to connect
4.Repeat 1-3 to try.
Troubleshooting for offline device
1.Please Make sure the device has been powered on
2.Please check if the network is stable.Checking method:put a phone or an tablet
next to the device and make sure they are connected to the same network,then try
to open a web page.
3.Please make sure the home Wi-Fi is working well,or whether the Wi-Fi name
,password,etc have been modified.If so,reset the device and add it again.(How to
remove the device:Open the App and enter the device control,Click ‘...’ button on
the top right hand corner,Click on the bottom of the page ‘Remove device’)
4.Please try to reboot the router and wait 3 minutes to observe the status of the
device
5.Please try to re-set the device:Delete the plug on Smart Life App,Plug it on 10s
then unplug,Plug it back then hold the power button on 5 second until you hear a
click and the light starting fast blinks,Following the direction to set it up again to see
if it back to work well
6.If the network is in good condition and shoes no sign of modifications after
troubleshooting,please go to the device’s control page and click the ‘...’ button in
the upper right hand corner to get into the ‘More ’ page,Then click ‘feedback’ and
enter the issue you encountered and provide your router model, we will handle it
ASAP.
Troubleshooting for App un-Function
App is not able to control the device remotely and function not effective after
control
1.Please make sure the device has been powered on
It is recommended that you keep the app open about 3 minutes,and see whether
the device is still online;If it is still online,Please place the phone next the device
and make sure they are connected to the same Wi-Fi.Try to open a web page to
check the network’s status
If device is online and network is in good condition,yet it still cannot control any
device,please go to the device’s control page and click the ‘...’ button in the upper
right hand corner to get into the ‘More ’ page,Then click ‘feedback’ and enter the
issue you encountered and provide your router model, we will handle it ASAP.
When the device is connected,it can be controlled at the same location,but cannot
be remotely controlled by the phone when moved to another location or other
network
2.Please place the Phone next to the device and connect it to the same Wi-Fi as
the device.Try to open a web page to check if the Wi-Fi can connect to the
Internet,If you cannot access the network,Please reboot the router
If the device has been connected to the network and the above issue occurs,please
go to the device’s control page and click the ‘...’ button in the upper right hand
corner to get into the ‘More ’ page,Then click ‘feedback’ and enter the issue you
encountered and provide your router model, we will handle it ASAP.
Device status cannot be synchronized with the status displayed on the App
If the device is controlled by a physical switch,the device may not be synchronized
at the same time,so please you open the App and the device status will be updated
after operating.
How to cancel the countdown setting?
Please set the countdown timer at 0 hours and 0 minute to cancel the countdown.
Fail to find ‘Smart Life-xxxx’ when using AP mode
Please find the ‘undefined-xxxx’ in the Wi-Fi list,or other similar hotspots to connect
Third-Part control
When the third-Party device is connected but unable to perform voice control
1.Please check the user manual of the third party control device app and see if this
voice command is recognized accurately.
2.Please check to re-link smart life account to this voice control app
Contact:
Esicoo :
Web: www.esicoo.com
E-mal:[email protected]
Tuya:
Web: http://en.tuya.com
E-mail:[email protected]
Youtube:https://www.youtube.com/channel/UCNIn1Wy_K09MSRgTyinn0oA/videos
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement