Blossom 0080-AWICD Irrigation System Controller Installation Sheet

Installation Sheet

1

What’s in the box?

1

2

Blossom Controller

Blossom Bracket

3

4

5

6

Four Wall Screws

Ethernet Cord

Blossom Bridge

Wire Labels

6

C

COMMON

1 2 3 4 5 6 P

PUMP

C

COMMON

7 8 9 10 11 12

4

3

2

5

1

Connect

the Ethernet cable

What you will need:

• iOS or Android Device

• Internet Router and Service

TM

Plug in

the Blossom Bridge

Note : Make sure the Bridge is plugged in directly into a power socket. Avoid any power protection strip. You should see a green light once you connect it.

Connect one end of the provided

Ethernet cable into the Blossom Bridge.

Connect the other end of the Ethernet cable into an open port on your router.

2

Label the wires

of your old controller

Keep track of your common wire. We provide you a black label for it. If you have a pump relay wire, use the gray label for it.

If you want to keep your zones in the same valve numbers you can use the orange stickers.

Power up by plugging the Blossom

Bridge directly into an electrical outlet near your internet router.

Remove

your old controller

Dismount your old watering controller from the wall.

3

Install

the Blossom Bracket

Mount the Blossom Bracket directly on the wall with the four provided screws.

4

Snap the Blossom Controller

on to the Blossom Bracket

Secure the Blossom Controller to the Blossom

Bracket on the wall.

Connect

the wires

Locate the opening in the base of the Blossom

Bracket. Connect the labeled wires to their corresponding colored ports. Connect the common wire

(black sticker) to the a black connector port.

If you have a pump relay, use the far right gray port.

Note : Discard your existing weather sensors. You won’t need them. Blossom uses real-time weather data.

Plug in

the Blossom Controller

Plug the Blossom Controller’s power cord into an available electrical outlet.

5

Get

the Blossom App

Download the Blossom app on the Apple App Store,

Google Play Store or visit myblossom.com

.

The app will guide you through creating your account, syncing your device and connecting your Blossom to the Internet.

Pair

your Blossom Controller

You will require a pairing code, which you can find in page number 25 of your Quick Start Guide.

It looks like this one: