Sceptre E248W-19203R Monitor User Manual

213mm

8144021020009C

284mm

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Display, please read the following precautions carefully before using the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightening storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

- 1 - www.SCEPTRE.com

SCEPTRE E24 FHD Display User Manual


Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

1. Use only cabinets or stands recommended by the manufacturer of the display set.

2. Use only furniture that can safely support the display set.

3. Make sure the display set is not overhanging the edge of the supporting furniture.

4. Do not place the display set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display set to a suitable support.

5. Do not place the display set on cloth or other materials that may be located between the display set and supporting furniture.

6. Make sure to warn and educate children about the dangers of climbing on furniture to reach the display set or its controls.

7. Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.

8. The ventilation should not be impeded by covering the ventilation openings wi th items, such as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturer’s i nstructions.

9. No naked flame sources, such as lighted candles, should be placed on the ap paratus.

10. Operating environment: temperature: 5°C~35°C, Humidity: 10% to 90% noncondensing, altitude: 0~2,000 m.



IMPORTANT INFORMATION



IMPORTANT INFORMATION

Dispose unwanted electronics and batteries through an approved recycler.

For display please visit the web at http://www.earth911.com/recyclingguide/how-to-recycle-large-electronics/

For Batteries please visit the web at http://www.call2recycle.org/

The double square is to identify equipment meeting the safety requirements specified for Class II equipment according to IEC 60417-

5172 .

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. Please refer to the last page for further references.

The ETL Mark is proof of product compliance in United States.

The house icon identifies that this product is for indoor use.

This UL mark is certify of product compliance with

UL energy efficiency certification.

This mark is to certify the AC adapter from this product complies with the definition of Limited Power Source.




This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.



To avoid the risk of electric shock or between the display and supporting









 component damage, switch off the power before connecting other components to the display.

Unplug the power cord before cleaning the display. Please use the included custom bezel cleaning cloth for cleaning the bezel of the display only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.

Always use the accessories recommended by the manufacturer to insure compatibility.

When moving the display from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the display immediately after this to avoid causing fire, electric shock or component damage.

Do not place the display on an unstable cart, stand, or table. If the display falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the display.

Only use furniture that can safely support the display.









 furniture.

Be sure to educate your children regarding the dangers of climbing on furniture to reach the display or its controls.

Any heat source should maintain a distance of at least 5 feet away from the display, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the display and to protect it from overheating, be sure these openings are not blocked or covered.

Do not place the display in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the ventilation slots of the display. Do not place any objects on the top of the

Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the display.

Do not use the display in a portrait



Make sure the display is not overhanging the edge of the support furniture. format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat



Do not place the display onto tall furniture (such as cupboards or bookcases) without anchoring both

 dissipation and would eventually damage the display.

The display should be operated only

 the furniture and the display to a suitable support.

Do not place the display on cloth or from the type of power source indicated on the label. If you are not sure of the type of power supplied to other materials that may be located your home, consult your dealer or local power company.























The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.

The display is equipped with a twopronged plug.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be installed near the equipment and should be easily accessible.

Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.

Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.

Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the display from damage due to power surges.

Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.

Keep the product away from moisture.

Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.

















Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.

Do not install the product in an area with heavy dust or high humidity.

Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.

Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.

To avoid risk of electric shock, do not touch the connector with wet hands.

Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.

If any of the following occurs please contact the dealer: o The power connector fails o o o or frays.

Liquid sprays or any object drops into the display.

The display is exposed to rain or other moisture.

The display is dropped or damaged in any way.

The performance of the o display changes substantially.

Operating environment: Temperature:

5°C ~ 35°C, Humidity: 10% to 90% non-condensing, Altitude: 0~2,000 m.

Dear Sceptre Customer,

Congratulations on your new SCEPTRE E24 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.

For technical assistance , please call 1800-788-2878 and select option 3 or email our tech support group at [email protected]

.

For all other inquiries , please call 1800-788-2878 and select option 4 or email our customer service group at [email protected]

.

Live Chat also available during business hours M-F 8:30AM-5:30PM.

We recommend you register your SCEPTRE monitor by going to our website http://www.sceptre.com/registration.html

.



Opening the Package

The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.

Package Contents

SCEPTRE Display x 1

Display Base x 1

Base Screws x 2

AC Adapter x 1

User Manual x 1

Installation

Please read the user manual carefully before performing the installation. Please use the

AC Adapter designated for the product. When an extension cord is required, use one with the correct power rating. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. If you would like to mount the display onto the wall, please be sure to read all instructions provided by the display mounting company and this manual. Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.



Attaching the Base

1. Lay the display down and attach the base.

2. Screw in the 2 screws as indicated to secure the installation.



Removing the Base

1. To remove the stand, lay the display with the screen portion facing down. Look at the back of the monitor and pull open the plastic cover on the neck from the left side.

2. Unscrew the 2 screws and you can take apart the stand.



Table of Contents

SAFETY INSTRUCTIONS

..............................................................................................

1

SAFETY INSTRUCTIONS

.............................................................................................

2

IMPORTANT INFORMATION

.......................................................................................

3

IMPORTANT INFORMATION

.......................................................................................

4

SAFETY INSTRUCTIONS

..............................................................................................

5

Opening the Package

......................................................................................................

8

Package Contents

......................................................................................................

......8

Installation

......................................................................................................

......

..........

...8

Attaching the Base

......................................................................................................

.....9

Removing the Base

......................................................................................................

..10

Table of Contents

......................................................................................................

.....11

Identifying Front and Rear Panel

................................................................................

12

Front View

......................................................................................................

......

..........

.12

Rear View Mounting Pattern

........................................................................................

12

Rear Control Buttons

......................................................................................................

13

Rear View Connections

.................................................................................................

14

Connections

.....................................................................................................................

15

If You have VGA Connection on Your Video Card……

........................................

15

If You have HDMI Connection on Your Cable or Satellite Box…

.......................

16

On Screen Display (OSD) Menu

.................................................................................

17

LUMINANCE

......................................................................................................

......

.......

18

IMAGE

......................................................................................................

......

...

.............19

COLOR TEMP

......................................................................................................

......

...

20

OSD SETTINGS

......................................................................................................

......21

RESET

.....................................................................................................

......

...

.............22

OTHER

.....................................................................................................

......

...

.............23

Supported PC (VGA) Resolution

................................................................................

24

Supported Video (HDMI) Resolution

.........................................................................

24

Troubleshooting

......................................................................................................

......

.

25

How do I clean the LED Monitor?

...............................................................................

28

Specification

......................................................................................................

......

.......

29

LIMITED PRODUCT WARRANTY

.............................................................................

30

Disclaimer, Trademarks, Icons & Copyright Information

.......................................

32

FCC Compliance Statement

........................................................................................

33



Identifying Front and Rear Panel

Front View

Rear View Mounting Pattern

Mounting Specification: 100mm using screw size M4 x 2 Length of screw should not exceed 5mm .

Please Note: The 10mm length of screw refers to how deep the screw can go inside the mounting holes. When you’re buying screws, you should add the original 10mm to the thickness of your mounting plate in order to get the total screw length.



Rear Control Buttons

1.

2.

3.

– This button activates the On Screen Display (OSD). While the OSD is active, this button will act as the select button to open up an option for adjustment.

▲ – This button moves the selection up while the OSD is active. This button will also increase the value of an adjustment while an option is open.

▼ –

This button moves the selection down while the OSD is active. This button will also decrease the value of an adjustment while an option is open.

4. – This button switches between all the different inputs of the display. When the OSD is active, this button acts as the EXIT button and exits out of the option or

OSD.

5. – This button turns the display on or off.



Rear View Connections

1. POWER

–

This plug is responsible for providing power to the monitor. Use it with the included AC adapter.

2. AUDIO OUT (3.5mm Mini-jack)

–

This connection is for audio out from the monitor to multimedia speakers or headphones.

3. AUDIO IN (3.5mm Mini-jack)

–

This connection is for audio in from the computer going into the monitor.

4. VGA

–

VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal. This method of connection is the most commonly used connection.

5. HDMI

–

HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.

WARNING:



This monitor is not equipped with built in speakers. The [audio in] connection is used to transfer audio signal to the [audio out] port.



Connections

If You h ave VGA Connection on Your Video Card…

1. Make sure the power of E24 LED MONITOR is turned off.

2. If you were previously using a CRT (bulky) monitor , please hook up your old monitor first and make sure your refresh rate is set to 60 Hz frequency before using the E24 LED MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING on the desktop with nothing selected. After you have right clicked, select the

PROPERTIES option. Click on the SETTINGS tab. Click on the

ADVANCED button. Click on the MONITOR tab. In that tab, change the refresh rate to 60 Hz and click on APPLY. After the refresh rate changed, please shut down the computer and monitor.

3. Obtain the VGA cable and connect to the VGA connection on your PC.

Connect the other end of the cable to your E24 LED MONITOR.

4. Turn on the power of both the E24 LED MONITOR and the PC.

Please Note:

 The PC’s clearest picture is ran with 1920 x1080 at 60 Hz.



If You have HDMI Connection on Your Cable or Satellite Box …

1. Make sure the power of the E24 LED MONITOR is turned off.

2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the cable or satellite box.

3. Turn on the power of both the E24 LED MONITOR and the cable or satellite box.

Please Note:



Make sure to set audio output from your cable or satellite box to

PCM output.



Please refer to the cable or satellite company for more information.



On Screen Display (OSD) Menu

The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, contrast, and backlight etc.

When you press the button on the monitor, the OSD screen will appear. Select each of the functions with the

▲ or

▼

buttons. Use the button again to enter each of the function or when you’re in the function already, use the button to select the option you want to adjust. Use the

▲ or

▼ buttons to adjust each option’s values. When you want to exit press the button.



LUMINANCE

This function adjusts the brightness and contrast of the LCD.

1. To use this function, press to open the OSD then highlight

LUMINANCE function by pressing the

▲ or

▼

button.

2. Press again to enter the function.

3. Press

▲ or

▼

button to select BRIGHTNESS or CONTRAST to adjust.

4. Press to select the option you want to adjust.

5. Use the

▲ or

▼

button to adjust the values. a. BRIGHTNESS – This option adjusts the black level in a picture. If the value is adjusted too high, the picture will look washed out. If too low, the picture will not have much detail in dark colors. b. CONTRAST

–

This option adjusts the white levels in a picture. If the value is adjusted too high, the picture will not have any details in bright parts of the picture. If it sets too low, the picture will looked washed out. c. BACKLIGHT

–

This option adjusts the backlight level of the LCD display. d. PRESET

–

This option lets the user select pre-calibrated options of brightness and contrast. e. DCR

–

This option automatically adjusts the contrast for you depending on the graphics displayed at the time.



IMAGE

This function adjusts the image quality of the monitor.

1. Press to open the OSD then highlight IMAGE by pressing the

▲ or

▼ buttons.

2. Press to enter the function.

3. Press the

▲ or

▼

buttons to select the option you want to adjust and press

to enter the option.

4. Use the

▲ or

▼

buttons to adjust the values. a. H. POSITION

–

This option adjusts the horizontal position of the image. b. V. POISTION

–

This option adjusts the vertical position of the image. c. CLOCK

–

This option adjusts the picture clarity by large increments. d. PHASE – This option adjusts the picture clarity by small increments. e. ASPECT

–

This option adjusts the format of the picture.

Please Note:



Always use auto adjust first to adjust the image.



This option is only available with a VGA connection. The image option will be disabled if you are using HDMI.



COLOR TEMP.

This function adjusts the overall balance of white colors in a picture in large increments.

Color temperature consists of COOL, NORMAL, WARM, and USER COLOR.

1. To use this function, press to open the OSD then highlight COLOR

TEMP function by pressing the

▲ or

▼

button.

2. Press again to enter the function.

3. Press

▲ or

▼

button to select the option you want.

4. Press to finalize your selection.

5. If you have selected USER on the COLOR TEMP. option, use the

▲ or

▼ button and the button to adjust the values. a. COOL

–

This option adjusts the white balance towards the blue color giving the picture a bluish tint and cooler look. b. NORMAL

–

This option adjusts the white balance to give the picture a no biased white color. c. WARM

–

This option adjusts the white balance towards the red color giving the picture a reddish tint and warmer look. d. USER COLOR

–

This option lets the user adjust the white balance by tweaking the RED, GREEN, and BLUE color.

6. If you have selected the BLUE LIGHT SHIFT option, it will adjust the level of blue light on the display.



OSD SETTINGS

This function allows you to change the language of the OSD and adjust the

OSD options.

1. Press to open the OSD then highlight OSD SETTINGS by pressing the

▲ or

▼

buttons.


3. Press the

▲ or

▼

buttons to select the option you want to change to and press to begin adjusting the option a. LANGUAGE – This option selects various languages for the OSD. b. OSD H. POSITION – This option changes the horizontal position of the OSD. c. OSD V. POSITION – This option changes the vertical position of the OSD. d. OSD TIMER – This option changes how long the OSD menu will stay up. e. TRANSPARENCY – This option adjusts the transparency of the

OSD menu.

Please Note:



Changing the language of the OSD will alter all the messages and OSD language of the monitor.



RESET

This function resets the monitor’s settings.

1. Press to open the OSD then highlight RESET by pressing the

▲ or

▼ buttons.


3. Press the

▲ or

▼

buttons to select the option you want to use. a. IMAGE AUTO ADJUST – This option automatically adjusts the image clarity while under the input VGA. b. COLOR AUTO ADJUST – This option automatically balances the image color balance while under the input VGA. c. RESET – This option reset all settings under the OSD.

Please Note:



IMAGE AUTO ADJUST and COLOR AUTO ADJUST only available under the input VGA.



OTHER

This function changes various miscellaneous options.

1. Press to open the OSD then highlight OTHER by pressing the

▲ or

▼ buttons.


3. Press the

▲ or

▼

buttons to select the option you want to change to and press the button to begin adjusting the option a. SIGNAL SOURCE – This option lets users change the source of their video.



Supported PC (VGA) Resolution

RESOLUTION & REFRESH RATE

1920 x 1080 @ 60Hz

1680 x 1050 @ 60Hz

1280 x 1024 @ 60Hz

800 x 600 @ 60Hz

640 x 480 @ 60Hz

Supported Video (HDMI) Resolution

VIDEO RESOLUTION

480p

720p

1080i

1080p

*Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice.



Troubleshooting

Problem

DISPLAY IS

UNCLEAR AND

UNSTABLE

THERE IS NO LED

DISPLAY or

SCREEN SAYS NO

SIGNAL

MONITOR SAYS

“SIGNAL OUT OF

RANGE”

Possible solutions

To stabilize and clarify your display, use the AUTO ADJUST function or change the resolution to the display’s optimal setting 1920 x 1080 at 60Hz, then AUTO ADJUST.

Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt. Swap out the video cable for another one to see if the monitor will work. Check your power plug. See if it is fully plugged in on both the monitor and the wall.

If you have a CRT monitor, please connect the CRT monitor to the computer and change the refresh rate down to 60 Hz via your video card’s display settings menu. After the setting of

60 Hz has been change you can then use the LED on the computer.

1. To change the setting go to display settings by right clicking on your desktop with nothing selected.

Choose the PROPERTIES option.

2. Click on the SETTINGS tab, verify the resolution is

NOT higher than 1920 x 1080, and click on the

ADVANCED button.

3. Click on the MONITOR tab and change the refresh rate to 60 Hz.

4. Click on OK 2-3 times to finalize your change.

If you do NOT have a CRT monitor or it’s already broken, please make sure both the E24 LED monitor and your computer is turned off.

1. Turn on the LED monitor and the computer.

2. While the computer is turned on, press the “F8” key on your keyboard continuously until a selection menu appears and select the “Safe Mode” option.

3. When you’ve entered Safe Mode please uninstall any video card driver and monitor driver by using either the “Add / Remove Programs” icon or going into

“System

4. Properties” and manually removing anything under

“Monitors” and “Display Adapters”. After removing all the drivers, please reboot your computer and you should be able to see windows. Please install your monitor driver first, then your video card driver.

Please remember to make sure your refresh rate should be at 60Hz.

I CAN’T OPEN THE

OSD

You need to have a valid video signal going through the monitor before you can turn on the OSD.



Problem

I CANNOT GET THE

RESOLUTION

1920 x1080

I DO NOT HEAR ANY

SOUND FROM THE

SPEAKERS

THE VIDEO IS TOO

BRIGHT NO MATTER

WHAT I ADJUST

THE WORDS AND

VIDEO ARE TOO

BLURRY

THE COLORS ARE

NOT CORRECT


If you are using HDMI, please try out VGA to see if you are able to achieve that resolution. If your VGA can then, your video card ’s HDMI cannot support widescreen resolutions.

Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want. Rebooting your computer will solve the situation.

You can also make sure your video card’s video drivers are up to date. You can find what video card you have by clicking on START then RUN. Type in “DXDIAG”. When the diagnostic window pops up, click on the DISPLAY tab. The program will tell you what video chipset you have. Copy that name then search it with an online search engine like

GOOGLE™. Find your video card company’s web address and search for newer drivers. If updating your drivers does not work, you probably have one of the older video cards and cannot achieve a widescreen resolu tion. You’ll need to upgrade your video card to a newer one.

Check your 3.5 mm mini-jack cable and see if it is connected correctly between the computer and the monitor.

Check the volume of your computer and also the volume of the monitor.

Sometimes having older video cards this type of problem might happen due to newer LEDs having to provide HD video capability and not being fully compatible with older video cards. You can try adjusting the contrast to a lower value and adjust the brightness to compensate.

Are you using the monitor’s native resolution? If not you’ll need to switch resolution to the native 1920 x 1080 at 60 Hz to make the words clearer. If you’re using VGA please do not forget to AUTO ADJUST.

If the words are still blurry, please try enabling or disabling

CLEAR TYPE function from windows.

Sometimes the colors are not correct because your VGA or

HDMI cable is loose. Please try reconnecting your cable or swap out your current cable to see if the problem persists.

HOW DO I RESET

THE MONITOR

Make sure there is a valid video signal to the monitor and press menu to open the OSD. Look for ALL RESET under

RESET options



Problem

THE WORDS ARE

TOO SMALL AT

1920 x1080

I DO NOT HEAR ANY

SOUND FROM THE

SPEAKERS WHEN

USING THE

(OPTIONAL) HDMI

PORT

I CAN’T GET TO THE

IMAGE OPTION

UNDER THE OSD


At the native resolution of 1920 x1080, some people might feel that the words are too small to read. You can change the size of the words in Windows Operating System via its display properties.

For Windows XP

1. Right click on the background with nothing selected. Left click on the PROPERTIES option.

2. Click on the SETTINGS tab.

3. Under SETTINGS, click on the ADVANCED button.

4. Under GENERAL tab, change the size of the words by selecting the option NORMAL SIZE and change it to LARGE SIZE.

5. Click on OK on all windows to exit.

6. Once you have finished rebooting, the computer is ready for use.

For Windows VISTA or Windows 8 or Windows 10

1. Right click on the Wallpaper. Left click on the

PERSONALIZE option.

2. Click on ADJUST FONT SIZE (DPI) option on the left column and

3. Click on CONTINUE.

4. In there you can change the size of the words by changing from the option DEFAULT SCALE to

LARGE SCALE.

5. Click on APPLY to finalize your selection.

6. Once you have finished rebooting, the computer is ready for use.

The monitor only decodes PCM sound signals. Make sure your video device’s audio output is through HDMI and is outputting PCM sound format.

Make sure you are using a VGA video connection. If you have HDMI, that option will be disabled because it only adjusts analog signals.



How do I clean the LED Monitor?

IMPORTANT

1. The power cable has to be removed from the socket before cleaning the display.

2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the display. These types of chemicals might damage the housing and the LCD glass.

Cleaning the bezel

1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.

2. If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.

Please Note :



Make sure you wring the water out of the cloth before cleaning the bezel in order to prevent water from penetrating into the electronics.

Cleaning the Screen

1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.

2. The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or

100% cotton cloth afterwards.



Specification

Active Area / Screen Size

Aspect Ratio

Resolution

Brightness

Dynamic Contrast

Response Time

Viewing Angle

Colors

LED Backlight

Dimension

Weight

Power input

Wall Mount Hole Pattern

Display panel

24

” (d iagonal 23.8

“)

Widescreen 16 : 9

Native: 1920 x1080

230 cd/m

2

5000:1

5ms

Typical 178/178 Degree

(Horizontal/Vertical)

16.7M color

50,000+ hours

Monitor Display

With Stand: 21.45

” x 15 .70

” x 6.57”

Without Stand: 21.45

” x 12.52” x 1.

1 4”

5.77 lb (with stand), 5.33 lb (without stand)

AC Adapter

Input: 100

–

240V~ 50/60Hz, 1.0A

Output: 12V DC, 2.5A

100mm (M4 x 10mm screws not included)

Stand Screws M4 x 12mm (2 pcs)

Neck Screws M3 x 12mm (2 pcs)

Features

I/O

Compliance

VGA, HDMI (HDCP supported), AUDIO

IN/OUT

FCC, cTUVus, Energy Star V7.0, RoHS,

MS WHQL, ISTA 3A

V7.0

Energy Star

*Specifications are subject to change without notice.



LIMITED PRODUCT WARRANTY

Please read this warranty card carefully, it is a “ONE YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized

Reseller, only on new and non-refurbished product, and available to customers in the

Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended

Service warranty.

SCEPTRE’s Responsibility

SCEPTRE units purchased from an authorized SCEPTRE U.S. Reseller in the United States and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to be free from manufacturing defects in materials and workmanship for a period of one (1) year from the date of their original retail purchase (or a period of ninety (90) days for commercial use). If the unit fails to conform to this warranty, we will service the units using new or refurbished parts. In the event that the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner, for any upgraded parts substituted.

Service Labor

During a period of one (1) year from the effective warranty date (or a period of ninety (90) days for commercial use), SCEPTRE will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the

United States, you must first call our Customer Support at (800) 788-2878. The determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT RETURN YOUR

UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.

Parts

New or remanufactured parts will be used for repairs by SCEPTRE at its designated Service

Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.

Service

During the one (1) year (or ninety (90) days for commercial use) warranty period, SCEPTRE will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility. SCEPTRE is not responsible for the de-installation or re-installation of the unit.

Packaging and Shipping Instruction

When you send the product to an authorized SCEPTRE service facility you must use the original carton box and packing material or an equivalent as designated by SCEPTRE. If you no longer have them please contact Sceptre’s Customer Support.

Not Covered

This warranty does not cover the following: cosmetic defects; damage, malfunctions, or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering and or, damage from fire, water, lightning, power surges, abnormal environmental conditions, or other acts of nature; normal wear and tear (SCEPTRE reserves the right to dete rmine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect; or displays on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are



not covered by this warranty. Installation, removal, transportation and reinstallation of a display and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the display are not covered by this warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added

Feature” are not covered by this warranty or Sceptre, Inc. Any damages of any kind including, but not limited to, direct or indirect damages, lost profits, lost savings, or other special incidental, exemplary or consequential damages whether for breach of contract, tort, or otherwise, or whether arising out of the use of or inability to use the product, even if

SCEPTRE, INC. or any dealer, distributor of authorized service provider/partner has been advised of the possibility of such damages, or any claim by any other warranty are not covered by this warranty or Sceptre Inc.

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED

IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY

AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER,

INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS,

WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT

EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE

FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR

CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR

EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty.

SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether SCEPTRE should repair the damage for a fee or whether the product should be returned to you as received by the repair center.

Dead Pixel Policy

SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.

Owner’s Responsibility

Effective Warranty Date

Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your receipt, the warranty will revert to the unit’s manufacture date according to the serial number of the unit. This limited warranty applies only to the original purchaser and is non-transferable.

Warranty Service

For warranty service information, contact SCEPTRE Technical Support at email address

[email protected]

, via phone at (800) 788-2878, or via World Wide Web chatting service at www.Sceptre.com. SCEPTRE Technical Support is available Monday to Friday

8:30 AM to 5:30 PM Pacific Time. Parts and service labor that are SCEPTRE’s responsibility

(see above) will be provided without charge. Other services or services not covered by the warranty are at the owner’s e xpense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid a service call.

Warranty conditions are subject to change, for latest Warranty Terms and Conditions and additional information regarding your warranty, please see complete details online at www.SCEPTRE.com

.



Disclaimer, Trademarks, Icons &

Copyright Information

 “HDMI, the HDMI logo and High -Definition

Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.”



This Display meets the ENERGY STAR® guidelines under

the default picture settings. Changing this setting or

enabling other options will increase power consumption

which could possibly exceed the guidelines of ENERGY

STAR®.

For more information on the ENERGY STAR program, please refer to www.energystar.gov

.



Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries.



SCEPTRE is a trademark or registered trademark of Sceptre Group.



Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.



In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product specifications without notice. Information in this document may change without notice.



No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from

Sceptre, Inc.



FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:







Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord and power cord supplied with this unit.

The Federal communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

European Notice

Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.



Sceptre E248W-19203R Monitor User Manual

213mm

284mm

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

IMPORTANT INFORMATION

IMPORTANT INFORMATION

SAFETY INSTRUCTIONS

Dear Sceptre Customer,

Opening the Package

Package Contents

Installation

Attaching the Base

Removing the Base

Table of Contents

Attaching the Base

.....9

FCC Compliance Statement

33

Identifying Front and Rear Panel

Front View

Rear View Mounting Pattern

Rear Control Buttons

Rear View Connections

Connections

If You h ave VGA Connection on Your Video Card…

If You have HDMI Connection on Your Cable or Satellite Box …

On Screen Display (OSD) Menu

LUMINANCE

IMAGE

COLOR TEMP.

OSD SETTINGS

This function allows you to change the language of the OSD and adjust the

OSD options.

RESET

OTHER

Supported PC (VGA) Resolution

RESOLUTION & REFRESH RATE

Supported Video (HDMI) Resolution

VIDEO RESOLUTION

480p

720p

1080i

1080p

Troubleshooting

Problem

Possible solutions

Problem

Possible solutions

Problem

Possible solutions

How do I clean the LED Monitor?

IMPORTANT

Cleaning the bezel

Cleaning the Screen

Specification

LIMITED PRODUCT WARRANTY

Disclaimer, Trademarks, Icons &

Copyright Information

FCC Compliance Statement

Related manuals

Sceptre

SE248B-FWS168

Sceptre

E248W-1920R

Sceptre Technologies

HDTV

Sceptre Technologies

E24 Series

Sceptre

C248W-1920RN Curved Monitor

Sceptre

C325W-1920R

Sceptre

C27

Sceptre

E275W-19203R