Sceptre C305B-200UN Monitor User Manual 39 Pages
Sceptre C305B-200UN boasts a 30-inch QHD display with 2560x1440 resolution, delivering stunning visuals for work and entertainment. Its 178°/178° wide viewing angles and 85% NTSC color gamut ensure vibrant colors and clear images from any perspective. With a 75Hz refresh rate and AMD FreeSync support, you'll experience smooth and tear-free gaming. Multiple connectivity options, including HDMI and DisplayPort, make it easy to connect to various devices.
advertisement
C30
User Manual
www.sceptre.com
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal Display, please read the following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- 1 - www.SCEPTRE.com
SCEPTRE C30 Display User Manual
SAFETY INSTRUCTIONS
Never place a display set in an unstable location. A display set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
1.
Use only cabinets or stands recommended by the manufacturer of the display set.
2.
Use only furniture that can safely support the display set.
3.
Make sure the display set is not overhanging the edge of the supporting furniture.
4.
Do not place the display set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the display set to a suitable support.
5.
Do not place the display set on cloth or other materials that may be located between the display set and supporting furniture.
6.
Make sure to warn and educate children about the dangers of climbing on furniture to reach the display set or its controls.
7.
Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.
8.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. Install in accordance with the manufacturer’s instructions.
9.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
10.
Operating environment: Temperature: 5°C~35°C, Humidity: 10% to 85% noncondensing, Altitude: 0~2,000 m.
2 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
IMPORTANT INFORMATION
3 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
IMPORTANT INFORMATION
Dispose unwanted electronics and batteries through an approved recycler.
For display please visit the web at http://www.earth911.com/recyclingguide/how-to-recycle-large-electronics/
For Batteries please visit the web at http://www.call2recycle.org/
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. Please refer to the last page for further references.
The house icon identifies that this product is for indoor use.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
.
4 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display. Keep these instructions in a safe place for future reference.
•
•
•
•
•
•
•
•
•
To avoid the risk of electric shock or component damage, switch off the power before connecting other components to the display.
Unplug the power cord before cleaning the display. Please use a microfiber cleaning cloth for cleaning the bezel of the display only. Do not use a liquid or a spray cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the display from an area of low temperature to an area of high temperature, condensation may form on the housing. Do not turn on the display immediately after this to avoid causing fire, electric shock or component damage.
Do not place the display on an unstable cart, stand, or table. If the display falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the display.
Only use furniture that can safely support the display.
Make sure the display is not overhanging the edge of the support furniture.
Do not place the display onto tall furniture (such as cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.
Do not place the display on cloth or other materials that may be located
•
•
•
•
•
• between the display and supporting furniture.
Be sure to educate your children regarding the dangers of climbing on furniture to reach the display or its controls.
Any heat source should maintain a distance of at least 5 feet away from the display, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to anything that produces smoke or moisture. Operating the product close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the display and to protect it from overheating, be sure these openings are not blocked or covered.
Do not place the display in a bookcase or cabinet unless proper ventilation is provided.
Never push any object into the ventilation slots of the display. Do not place any objects on the top of the
Product. It could short circuit parts causing a fire or electric shock. Never spill liquids on the display.
Do not use the display in a portrait format (by rotating 90 degrees) under high temperature environment (25°C or higher), since this would retard heat dissipation and would eventually damage the display.
The display should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
5 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
•
•
•
•
•
•
•
•
•
•
The power cable must be replaced when using different voltage from that specified in the User Manual. For more information, contact your dealer.
The display is equipped with a twopronged plug.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be installed near the equipment and should be easily accessible.
Only the marked power source can be used for the product. Any power source other than the specified one may cause fire or electric shock.
Do not touch the power cord during thunderstorms. To avoid electric shock, avoid handling the power cord during electrical storms.
Unplug the unit during a lightning storm or when it will not be used for a long period of time. This will protect the display from damage due to power surges.
Do not attempt to repair or service the product yourself. Opening or removing the back cover may expose you to high voltages, the risk of electric shock, and other hazards. If repair is required, please contact your dealer and refer all servicing to qualified service personnel.
Keep the product away from moisture.
Do not expose this appliance to rain or moisture. If water penetrates into the product, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.
Do not use the product if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair the product yourself.
•
•
•
•
•
•
•
Avoid using dropped or damaged appliances. If the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of the product may cause fire or electric shock.
Do not install the product in an area with heavy dust or high humidity.
Operating the product in environments with heavy dust or high humidity may cause fire or electric shock.
Hold the power connector when removing the power cable. Pulling the power cable itself may damage the wires inside the cable and cause fire or electric shocks. When the product will not be used for an extended period of time, unplug the power connector.
To avoid risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions while using the remote control. Incorrect polarities may cause damage and leakage of the batteries, operator injury and contamination the remote control.
If any of the following occurs please contact the dealer: o The power connector fails or frays.
o o
Liquid sprays or any object drops into the display.
The display is exposed to rain or other moisture.
o o
The display is dropped or damaged in any way.
The performance of the display changes substantially.
Operating environment: Temperature:
5°C ~ 35°C, Humidity: 10% to 85% non-condensing, Altitude: 0~2,000 m.
6 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE C30 LED monitor purchase. Thank you for your support. To ensure safety and many years of trouble-free operation of your LED monitor, please read the manual carefully before making any adjustments, and keep them in a safe place for future reference. We hope you enjoy your new SCEPTRE monitor.
For technical assistance , please call 1(800) 788-2878 and select option 3 or email our tech support group at [email protected]
.
For all other inquiries , please call 1(800) 788-2878 and select option 4 or email our customer service group at [email protected]
.
Live Chat also available during business hours M-F 8:30AM-5:30PM.
We recommend you register your SCEPTRE monitor by going to our website http://www.sceptre.com/registration.html
.
7 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Opening the Package
The SCEPTRE display is packaged in a carton. The size and weight of the product might be too heavy for 1 person to handle. In the event of that happening; it is recommended that the display package must be handled by a minimum of 2 or more persons. Since the glass can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on protective padding. When opening the carton, check that the product is in good condition and that all standard accessories and items are included. Save the original box and all packing materials for future shipping needs.
Package Contents
SCEPTRE Display x 1
Display Base x 1
Display Neck x 1
Display Base Screw x 2 (M4 x 12mm)
Display Neck Screw x 1 (M4 x 12mm)
Metal Plate for Wall Mount x 1
DisplayPort Cable x 1
AC Adapter x 1
User Manual x 1
Installation
Please read the user manual carefully before performing the installation. When an extension cord is required, use one with the correct power rating. The product should be installed on a flat surface to avoid tipping. Space should be maintained between the back of the product and the wall for proper ventilation. Avoid installing the product in the kitchen, bathroom or other places with high humidity dust or smoke, so as not to shorten the service life of the electronic components. Please ensure the product is installed with the screen in landscape orientation. Any 90° clockwise or counterclockwise installation may induce poor ventilation and successive component damage.
8 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Installing the Monitor Stand Assembly
1.
With the packing foam still on, lay the monitor screen facing down on a table and open the top half of the packing foam. Install the neck to the base and insert the 2 base screws from the bottom. Tighten the screws to secure the base.
9 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
2.
Install the assembled stand to the back of the monitor and screw in the 1 neck screws to secure the stand to the monitor.
10 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
3.
Insert the rubber cover to the back of the neck and insert the red triangle to the bottom of the base.
4.
To finalize your installation of the display, please read the following: a.
If you are placing the display on a stand, we would recommend you to use a display safety strap (not included) in order to minimize the possibility of the display toppling over.
b.
Securely install all screws and connections.
11 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Removing the Stand for Wall Mounting
1.
To uninstall the stand assembly, lay the monitor facing downwards on a table.
Remove the rubber cover and unscrew the single screw to remove the stand.
2.
Once the stand is removed, you will see the indentation where you can install the mounting plate. The mounting pattern is 75mm x 75mm using M4 x 10mm screws.
12 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Table of Contents
SAFETY INSTRUCTIONS ................................................................... 1
SAFETY INSTRUCTIONS ................................................................... 2
IMPORTANT INFORMATION .............................................................. 3
IMPORTANT INFORMATION .............................................................. 4
SAFETY INSTRUCTIONS ................................................................... 5
Opening the Package ........................................................................... 8
Package Contents ................................................................................ 8
Installing the Monitor Stand Assembly ................................................. 9
Removing the Stand for Wall Mounting ............................................. 12
Table of Contents ............................................................................... 13
Identifying Front and Rear Panel ....................................................... 14
Front View with Buttons ................................................................. 14
Rear View with Connections .......................................................... 16
Panel Tilt Adjustment ..................................................................... 14
If You have HDMI Connection on Your Video Card… ................... 17
If You have DisplayPort Connection on Your Video Card… ......... 18
On Screen Display (OSD) Menu ........................................................ 20
QUICK START ............................................................................... 21
PICTURE ....................................................................................... 22
COLOR .......................................................................................... 24
SYSTEM ........................................................................................ 25
Supported DisplayPort ....................................................................... 26
Supported HDMI Resolution .............................................................. 27
Troubleshooting ................................................................................. 28
How do I clean the LED Monitor? ...................................................... 31
LIMITED PRODUCT WARRANTY .................................................... 33
Disclaimer, Trademarks, Icons & Copyright Information ................... 35
FCC Compliance Statement .............................................................. 36
13 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Identifying Front and Rear Panel
Front View
Indicator Light – The light is blue when the monitor is turned on. The light is red when the monitor is turned off but plugged into power. The light is flashing blue when there is no signal given to the monitor.
Panel Tilt Adjustment
The screen can be adjusted by inclining forward and backward; however, the specific adjustment depends on the specific model of the device. Generally, it may be inclined
1±1°forward and 10±1° backward.
Please Note:
• When adjust the angle of the monitor, be sure not to touch or press the
LCD screen.
14 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Rear View with Buttons
Buttons from right to left
1.
2.
3.
4.
5.
– This button activates the On Screen Display (OSD). While the OSD is active, this button will act as the select button to open up an option for adjustment.
– With no OSD, this button cycles between PRESET modes. With the OSD turned on, this button moves the selection upwards. This button will also increase the value of an adjustment while an option is open.
– With no OSD, this button activates a permanent crosshair for first person shooting games. With the OSD turned on, this button moves the selection downwards. This button will also decrease the value of an adjustment while an option is open.
– When the OSD is active, this button acts as the EXIT button and exits out of the option or OSD. This button switches between all the different inputs of the display.
– This button turns the display on or off.
15 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Rear View with Connections
1.
POWER – This plug is responsible for providing power to the monitor. Use it with the included AC adapter.
2.
HDMI 3 – HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.
3.
HDMI 2 – HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.
4.
HDMI 1 – HDMI stands for High Definition Multimedia Interface. This connection is for computers with HDMI video output.
5.
DISPLAYPORT – Displayport is a digital video connection for connection to computers with display port video output.
6.
AUDIO OUT (3.5mm Mini-jack) – This connection is for audio out from the monitor to multimedia speakers or headphones.
16 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Connections
If You have HDMI Connection on Your Video Card…
1. Make sure the power of the C30 LED MONITOR is turned off.
2. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer.
3. Turn on the power of both the C30 LED MONITOR and the computer.
17 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
If You have DisplayPort Connection on Your Video Card…
1. Make sure the power of the C30 LED MONITOR is turned off.
2. Obtain a DisplayPort cable and connect one end to the back of the monitor and the other end to the back of the computer.
3. Turn on the power of both the C30 LED MONITOR and the computer.
18 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
If You want to use Multi Window with your video card…
1. Make sure the power of the C30 LED MONITOR is turned off.
2. Obtain a DisplayPort cable and connect one end to the back of the monitor and the other end to the back of the computer.
3. Obtain a HDMI cable and connect one end to the back of the monitor and the other end to the back of the computer.
4. Turn on the power of both the C30 LED MONITOR and the computer.
5. From the monitor side, open the OSD by pressing the button. Under
PICTURE, select and turn on Multi Window either by using PIP or PBP.
Change to the correct HDMI source (diagram above shows computer connected to HDMI 1) for the secondary input.
6. From windows go to display settings and select extend display to show the desktop on both inputs.
19 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
On Screen Display (OSD) Menu
The OSD menu of the monitor provides various adjustments for the monitor such as color, brightness, and contrast …..etc.
When you press the button on the monitor, the OSD screen will appear. Select each of the functions with the or buttons. Use the button again to enter each of the function or when you’re in the function already, use the option you want to adjust. Use the
button to select the
or buttons to adjust each option’s values.
When you want to exit press the button.
20 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
QUICK START
1.
BACKLIGHT - This option adjusts the intensity of the LED diode directly.
2.
BRIGHTNESS – This option adjusts the brightness of the monitor.
3.
CONTRAST - This option adjusts the contrast of the monitor.
4.
PRESET – This option lets the user select different preset display modes of the monitor.
Only USER mode will allow the user to adjust options freely.
a.
STANDARD – This display mode is for regular users.
b.
USER – This display mode allows you to adjust contrast and brightness manually.
c.
MOVIE – This display mode is for playing movies.
d.
ECO – This display mode is for power saving.
e.
FPS – This display mode is for playing first person shooter games.
f.
RTS – This display mode is for playing real time strategy games.
5.
VOLUME – This option adjusts the loudness of the speaker.
6.
ASPECT – This option lets the user adjust the aspect ratio of the monitor.
a.
FULL – This option automatically stretches any picture to the full screen regardless of picture proportion.
b.
DOT BY DOT – This option displays the resolution exactly as is.
c.
4:3 – This option forces any resolution to a 4:3 square format.
7.
SOURCE – This option lets the user manually switch an input or auto where the monitor detects a signal and changes the source automatically.
8.
BLUE LIGHT SHIFT – This display mode filters out blue light for users who want blue light protection.
9.
FREESYNC™ – This option enables syncing with variable frequency with AMD video cards.
21 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
PICTURE
1.
BACKLIGHT - This option adjusts the intensity of the LED diode directly.
2.
BRIGHTNESS – This option adjusts the brightness of the monitor.
3.
CONTRAST - This option adjusts the contrast of the monitor.
4.
PRESET – This option lets the user select different preset display modes of the monitor.
Only USER mode will allow the user to adjust options freely.
a.
STANDARD – This display mode is for regular users.
b.
USER – This display mode allows you to adjust contrast and brightness manually.
c.
MOVIE – This display mode is for playing movies.
d.
ECO – This display mode is for power saving.
e.
FPS – This display mode is for playing first person shooter games.
f.
RTS – This display mode is for playing real time strategy games.
5.
DCR – This option turns on or off the dynamic contrast option of the monitor. Dynamic
Contrast automatically adjusts the contrast of the monitor based off the video signal provided.
6.
ASPECT – This option lets the user adjust the aspect ratio of the monitor.
a.
FULL – This option automatically stretches any picture to the full screen regardless of picture proportion.
b.
DOT BY DOT – This option displays the resolution exactly as is.
c.
4:3 – This option forces any resolution to a 4:3 square format.
7.
SHARPNESS – This option adjusts the sharpness of graphics and text for this monitor.
8.
MULTI WINDOW – This option allows user to display a second source of video simultaneously on the monitor.
22 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
a.
PIP – This option displays a second source of video in a small window at the corner of the monitor.
b.
PBP – This option displays a second source of video on the right half of the monitor.
9.
SECONDARY INPUT – This option lets the user select the input of the second video.
10.
PIP SIZE – This option changes the size of the PIP window.
11.
PIP POSITION – This option changes the location of the PIP window.
12.
AUDIO SOURCE – This option lets the user select the audio either from the main display source or the PIP/PBP display source.
13.
MULTI WINDOW SWAP – This option swaps the video between the PIP/PBP display and the main display.
23 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
COLOR
1.
TEMPERATURE – This option let users select different color temperatures of the monitor.
a.
NORMAL – This color temperature is for users who prefer a neutral white balance.
b.
COOL – This color temperature is for users who prefer a cool white balance.
c.
USER – This color temperature is for users who would like to adjust the
RGB (red, green, blue) values manually.
i. ADVANCE SETTINGS – This setting adjusts finer values besides RGB going into cyan, magenta, and yellow.
d.
WARM – This color temperature is for users who prefer a warm white balance.
2.
GAMMA – This option adjusts the gamma curve value of the monitor.
3.
TINT – This option adjusts the tint of the entire monitor.
4.
SATURATION – This option adjusts the color saturation of the entire monitor.
5.
BLUE LIGHT SHIFT – This display mode filters out blue light for users who want blue light protection.
24 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
SYSTEM
1.
OVERDRIVE – This option increases the pixel response time of the LCD screen.
2.
FREESYNC™ – This option enables syncing with variable frequency with AMD video cards.
3.
SLEEP MODE – With the monitor given no video signal, enabling this option will make the monitor automatically shut off after 30 minutes, 60 minutes, or 2 hours.
4.
BACKCOVER LIGHT – This option adjusts the backcover light is on or off.
5.
LANGUAGE – This option allows users to change the menu language of the monitor.
6.
OSD H POSITION – This option adjusts the placement of the OSD menu horizontally.
7.
OSD TIMER – This option adjusts the time it takes for the OSD menu to automatically shut off.
8.
OSD TRANSPARENCY – This option adjusts the opacity of the OSD menu.
9.
VOLUME – This option allows users to change the output level of the audio out port.
10.
MUTE – This option silences the monitor speakers.
11.
RESET – This option resets all values of the menu back to factory default.
25 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Supported DisplayPort
RESOLUTION & REFRESH RATE
2560 x 1080 @ 60Hz, 120Hz, 144Hz, 200Hz
1920 x 1080 @ 60Hz, 120 Hz
1 680 x 1050 @ 60 Hz
1600 x 900 @ 60Hz
1440 x 900 @ 60Hz
1 280 x 1080 @ 60Hz
1 280 x 1024 @ 60Hz, 75 Hz
1280 x 960 @ 60Hz
1280 x 720 @ 60Hz
1 024 x 7 68 @ 60 Hz, 7 5Hz
800 x 600 @ 60Hz, 75 Hz
26 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Supported HDMI
1
Resolution
RESOLUTION & REFRESH RATE
2560 x 1080 @ 60Hz, 120 Hz , 144Hz, 165Hz
1920 x 1080 @ 60Hz, 120Hz
1680 x 1050 @ 60Hz
1600 x 900 @ 60Hz
1440 x 900 @ 60Hz
1 280 x 1080 @ 60Hz
1 280 x 1024 @ 60Hz, 75 Hz
1280 x 960 @ 60Hz
1280 x 720 @ 60Hz
1 024 x 7 68 @ 60Hz, 75 Hz
800 x 600 @ 60Hz, 75Hz
Supported
HDMI2/HDMI3
Resolution
RESOLUTION & REFRESH RATE
2560 x 1080 @ 60Hz, 75Hz
1920 x 1080 @ 60Hz, 120Hz
1680 x 1050 @ 60Hz
1600 x 900 @ 60Hz
1440 x 900 @ 60Hz
1 366 x 768 @ 60Hz
1 280 x 1080 @ 60Hz
1280 x 1024 @ 60Hz , 75Hz
1280 x 960 @ 60Hz
1 280 x 7 20 @ 60Hz
1024 x 768 @ 60Hz, 75Hz
800 x 600 @ 60Hz, 75Hz
*Specifications are subject to change without notice.
27 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Troubleshooting
Problem
THERE IS NO LED
DISPLAY or
SCREEN SAYS NO
SIGNAL
MONITOR SAYS
“SIGNAL OUT OF
RANGE”
I CAN’T OPEN THE
OSD
Possible solutions
Make sure you switched to the correct source. Check both sources to see video is on the other source. Check your video cable. It might be corrupt. Swap out the video cable for another one to see if the monitor will work. Check your power plug. See if it is fully plugged in on both the monitor and the wall.
If you have a CRT monitor, please connect the CRT monitor to the computer and change the refresh rate down to 60 Hz via your video card’s display settings menu. After the setting of
60 Hz has been changed, you can then use the C30 LED
Monitor on the computer.
1.
To change the setting go to display settings by right clicking on your desktop with nothing selected.
Choose the PROPERTIES option.
2.
Click on the SETTINGS tab, verify the resolution is
NOT higher than 2560 x 1080, and click on the
ADVANCED button.
3.
Click on the MONITOR tab and change the refresh rate to 60 Hz.
4.
Click on OK 2-3 times to finalize your change.
If you do NOT have a CRT monitor or it’s already broken, please make sure both the C30 LED monitor and your computer is turned off.
1.
Turn on the LED monitor and the computer.
2.
While the computer is turned on, press the “F8” key on your keyboard continuously until a selection menu appears and select the “Safe Mode” option.
3.
When you’ve entered Safe Mode please uninstall any video card driver and monitor driver by using either the “Add / Remove Programs” icon or going into
“System
4.
Properties” and manually removing anything under
“Monitors” and “Display Adapters”. After removing all the drivers, please reboot your computer and you should be able to see windows. Please install your monitor driver first, then your video card driver.
Please remember to make sure your refresh rate should be at 60Hz.
You need to have a valid video signal going through the monitor before you can turn on the OSD.
28 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Problem
I CANNOT GET THE
RESOLUTION
2560 x1080
Possible solutions
Sometimes your video card will not read the monitor correctly and will not allow you to achieve the resolution you want. Rebooting your computer will solve the situation.
You can also make sure your video card’s video drivers are up to date. You can find what video card you have by clicking on START then RUN. Type in “DXDIAG”. When the diagnostic window pops up, click on the DISPLAY tab. The program will tell you what video chipset you have. Copy that name then search it with an online search engine like
GOOGLE™. Find your video card company’s web address and search for newer drivers. If updating your drivers does not work, you probably have one of the older video cards and cannot achieve a widescreen resolution. You’ll need to upgrade your video card to a newer one.
THE VIDEO IS TOO
BRIGHT NO MATTER
WHAT I ADJUST
THE WORDS AND
VIDEO ARE TOO
BLURRY
Sometimes having older video cards this type of problem might happen due to newer LEDs having to provide HD video capability and not being fully compatible with older video cards. You can try adjusting the contrast to a lower value and adjust the brightness to compensate.
Are you using the monitor’s native resolution? If not you’ll need to switch resolution to the native 2560 x 1080 at 60 Hz to make the words clearer.
THE COLORS ARE
NOT CORRECT
If the words are still blurry, please try enabling or disabling
CLEAR TYPE function from windows.
Sometimes the colors are not correct because your DP or
HDMI cable is loose or corrupt. Please try reconnecting your cable or swap out your current cable to see if the problem persists.
HOW DO I RESET
THE MONITOR
Make sure there is a valid video signal to the monitor and press menu to open the OSD. Look for RESET under the
OTHER options.
I CHANGED MY
COLOR SETTINGS
NOW I CAN’T GET
THE FACTORY
DEFAULT BACK.
Open the OSD, under OTHER, select RESET to reset all values back to factory default.
29 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Problem
THE WORDS ARE
TOO SMALL AT
2560 x1080
I CANNOT GET
144Hz, 200Hz
REFRESH RATE
ON MY MONITOR
Possible solutions
At the native resolution of 2560 x 1080, some people might feel that the words are too small to read. You can change the size of the words in Windows Operating System via its display properties.
For Windows XP
1.
Right click on the background with nothing selected. Left click on the PROPERTIES option.
2.
Click on the SETTINGS tab.
3.
Under SETTINGS, click on the ADVANCED button.
4.
Under GENERAL tab, change the size of the words by selecting the option NORMAL SIZE and change it to LARGE SIZE.
5.
Click on OK on all windows to exit.
6.
Once you have finished rebooting, the computer is ready for use.
For Windows VISTA or Windows 8 or Windows 10
1.
Right click on the Wallpaper. Left click on the
PERSONALIZE option.
2.
Click on ADJUST FONT SIZE (DPI) option on the left column and
3.
Click on CONTINUE.
4.
In there you can change the size of the words by changing from the option DEFAULT SCALE to
LARGE SCALE.
5.
Click on APPLY to finalize your selection.
6.
Once you have finished rebooting, the computer is ready for use.
Make sure your video card supports that feature. Also make sure you are using DisplayPort to connect from your computer to your monitor.
30 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
How do I clean the LED Monitor?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning the display.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the display. These types of chemicals might damage the housing and the LCD glass.
Cleaning the bezel
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the bezel is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.
Please Note:
•
Make sure you wring the water out of the cloth before cleaning the bezel in order to prevent water from penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or
100% cotton cloth afterwards.
31 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Specification
Active Area / Screen Size
Aspect Ratio
Resolution
Brightness
Dynamic Contrast
Response Time
Refresh Rate
Viewing Angle
Colors
Curvature
LED Backlight
Dimension
Weight
Wall Mount Pattern
Base Screws
Neck Screws
Adapter I nput
DC
Tilt
I nput
Speaker Specification
On Screen Display Control (OSD)
OSD Language
FreeSync
Preset Picture Mode
Preset Game Mode
Blue Light Elimination
I/O
Compliance
Display panel
30” Diagonal Viewable
Widescreen 21 : 9
Native: 2560 x1080
250 cd/m 2 (Typ.)
1,000,000:1 (3,000:1 typical)
5 ms (G-to-G)
200 Hz
Typical 1 7 0 / 1 6 0 Degree
(Horizontal/Vertical)
16.7 million of colors
1800°
50,000 hours
Monitor Display
With Stand: 27.8” x 16.1” x 7.4”
Without Stand: 27.8” x 12.6” x 4.3”
12.15 lb (with stand), 11.03 lb (without stand)
75mm x 75mm Screw Size M4 x 10mm
M4 x 12mm (2pcs)
M4 x 12mm (1pcs)
Input: 100 – 240V~ 50/60Hz, 1.1A Max
1 2 V , 4.0
A
Backward:10° Forward: 1°
4 Ω /3W
Features
QuickStart, Picture, Color, System
English (Default), French, Spanish, Chinese
Available
Standard, User, Movie, Eco
RTS, FPS
Available
HDMI x 3, DP, 3.5mm Audio Out
FCC, c TUV us , ISTA, HDMI, RoHS,
AMD Radeon FreeSync™
*Specifications are subject to change without notice.
32 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
LIMITED PRODUCT WARRANTY
Please read this warranty card carefully, it is a “ONE-YEAR LIMITED WARRANTY” on parts and labor (90 days for commercial use) and is only valid when purchased from an Authorized
Reseller, only on new and non-refurbished product, and available to customers in the
Continental US, Alaska, Hawaii and Puerto Rico. See below for the SCEPTRE Extended
Service warranty.
SCEPTRE’s Responsibility
SCEPTRE units purchased from an authorized SCEPTRE U.S. Reseller in the United States and that are used in the fifty (50) United States or Puerto Rico and Canada are warranted to be free from manufacturing defects in materials and workmanship for a period of one (1) year from the date of their original retail purchase (or a period of ninety (90) days for commercial use). If the unit fails to conform to this warranty, we will service the units using new or refurbished parts. In the event that the part required for replacement is no longer in production and/or is obsolete, SCEPTRE will repair or replace the unit with similar or like parts of equal value. If a similar or like part is not available, a charge may be incurred to the owner, for any upgraded parts substituted.
Service Labor
During a period of one (1) year from the effective warranty date (or a period of ninety (90) days for commercial use), SCEPTRE will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the
United States, you must first call our Customer Support at (800) 788-2878. The determination of service will be made by SCEPTRE Customer Support. PLEASE DO NOT RETURN YOUR
UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured parts will be used for repairs by SCEPTRE at its designated Service
Center for one (1) year (or ninety (90) days for commercial use) from the effective warranty date. Such replacement parts are warranted for the remaining portion of the original warranty period.
Service
During the one (1) year (or ninety (90) days for commercial use) warranty period, SCEPTRE will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility. SCEPTRE is not responsible for the de-installation or re-installation of the unit.
Packaging and Shipping Instruction
When you send the product to an authorized SCEPTRE service facility you must use the original carton box and packing material or an equivalent as designated by SCEPTRE. If you no longer have them please contact Sceptre’s Customer Support.
Not Covered
This warranty does not cover the following: cosmetic defects; damage, malfunctions, or failures resulting from shipping or transit accidents, abuse, misuse, operation contrary to furnished instructions, operation on incorrect power supplies, operation with faulty associated equipment, modification, alteration, improper servicing, tampering and or, damage from fire, water, lightning, power surges, abnormal environmental conditions, or other acts of nature; normal wear and tear (SCEPTRE reserves the right to determine “wear and tear” on any and all products); unsatisfactory visual or audio performance not caused by a manufacturing defect; or displays on which the serial number has been removed or defaced. Image Sticking caused by operating at excessive brightness levels for extended periods or mishandling are
33 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
not covered by this warranty. Installation, removal, transportation and reinstallation of a display and routine maintenance and cleaning, are not covered by this warranty. Any hardware, components, and/or software bundled with the display are not covered by this warranty. Any damages caused directly or indirectly by Buyer’s or Reseller’s “Value Added
Feature” are not covered by this warranty or Sceptre, Inc. Any damages of any kind including, but not limited to, direct or indirect damages, lost profits, lost savings, or other special incidental, exemplary or consequential damages whether for breach of contract, tort, or otherwise, or whether arising out of the use of or inability to use the product, even if
SCEPTRE, INC. or any dealer, distributor of authorized service provider/partner has been advised of the possibility of such damages, or any claim by any other warranty are not covered by this warranty or Sceptre Inc.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED
IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR LIABILITY FOR ANY
AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER,
INCLUDING OUR NEGLIGENCE, ALLEGED DAMAGE OR DEFECTIVE GOODS,
WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT
EXCEED THE PURCHASE PRICE OF THE DISPLAY. WE SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, COMMERCIAL LOSS OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only warranty applicable; no one is authorized to extend or modify it or to grant any other warranty.
SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by the warranty, you will be contacted to determine whether SCEPTRE should repair the damage for a fee or whether the product should be returned to you as received by the repair center.
Dead Pixel Policy
SCEPTRE sets limit on the LCD at 3 dead pixels in a cluster adjacent to each other, or 5 dead pixels in a combination of color and brightness. Any number of dead or bad pixels under the limit is considered to be within normal performance specification of the LCD and is not considered defective.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service, keep the dated bill or sale receipt as evidence of the purchase date. If you can no longer obtain your receipt, the warranty will revert to the unit’s manufacture date according to the serial number of the unit. This limited warranty applies only to the original purchaser and is non-transferable.
Warranty Service
For warranty service information, contact SCEPTRE Technical Support at email address
, via phone at (800) 788-2878, or via World Wide Web chatting service at www.Sceptre.com. SCEPTRE Technical Support is available Monday to Friday
8:30 AM to 5:30 PM Pacific Time. Parts and service labor that are SCEPTRE’s responsibility
(see above) will be provided without charge. Other services or services not covered by the warranty are at the owner’s expense. You must provide the model, serial number and date of purchase. Before you ask for warranty service, read your User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and Conditions and additional information regarding your warranty, please see complete details online at www.SCEPTRE.com
.
34 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
Disclaimer, Trademarks, Icons &
Copyright Information
• “HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• DisplayPort is a trademark or registered trademark of Video Electronics
Standards Association.
• Microsoft, Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
• SCEPTRE is a trademark or registered trademark of Sceptre Group.
• Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
• In the interest of continuing product improvement, Sceptre, Inc. reserves the right to change product specifications without notice. Information in this document may change without notice.
• No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from
Sceptre, Inc.
35 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord and power cord supplied with this unit.
The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
36 www.SCEPTRE.com
SCEPTRE C30 Display User Manual
C30
814 40 2 313 0 99 9I
www.sceptre.com
90 2 A3L2M 20001
A3L2M
V01
C305B-200UN
说明书 SCEPTRE
201 9 06 03
140 mmX 210 mm
封页 120G 双铜 ， 内页 80G 双铜 ， 彩印，骑马钉+覆光膜
Zhanglei
advertisement
Key Features
- 30-inch curved VA panel with 2560 x 1080 resolution
- Fast 200Hz refresh rate and 1ms response time
- AMD FreeSync Premium technology for smooth gameplay
- Built-in speakers for a complete multimedia experience
- Multiple connectivity options including HDMI, DisplayPort, and USB-C