ASSEMBLY INSTRUCTIONS FOR
ITEM#4067-22
PLEASE READ AND SAVE THESE INSTRUCTIONS:
Be careful when unpacking the lamp since the wires are connected. If the wires
are pulled out of their connectors, the lamp will not turn on.
1.
2.
МО с В о
o
Begin at the bottom of the lamp.
Screw pole (B) clockwise onto lamp base (A) and
turn to tighten.
Screw pole (C) clockwise onto pole (B) till tight.
Screw pole (D) clockwise onto pole (C) till tight.
Screw socket (E) onto pole (D) till tight.
Screw tube (F) onto socket (E) till tight.
Place the shade (G) onto tube (F) and screw finial
(H) onto tube (F) and turn to tighten.
ltem weight: 6.30KGS.
CAUTION:
Use only with maximum of 2¥100 watt incandescent
bulbs (bulbs not included).
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Never use with an extension
cord unless plug can be fully inserted. Do not alter the plug.
SHAPING THE FUTURE OF HOME DESIGN
H——
D
T
C
T
B
® 21 Penn Plaza Suite 909, New York, New York 10001
@ 6 6 Ö Tel: (212) 736-4440 Fax: (212) 736-4806
">
