Screen Door Grille
Enhances and Protects
• Prevents children and pets from falling through screen
• Adds strength and stability to your screen door
• Anodized to prevent corrosion
• Simple Installation - hardware included
Important—please read carefully
Installation Instructions - Mounts on inside of screen door.
1. Standing inside coach with screen door closed, take a pencil and mark a line along door jamb on BOTH sides, top to bottom, of screen door. (Failure to do so may allow improper installation and screen door will not close.)
2. Open screen door and place against door for stability. Align Door Grille at desired height and within pencil marks
(performed in step #1). The grille is a 20" x 24" rectangle and may be used in either horizontal or vertical position depending on screen door size. Mark mounting holes with a pencil, drill 1/8" pilot holes and install unit with screws provided. When grille is positioned, tighten bolts and nuts on slides to hold in place.
Camco Manufacturing Inc.
121 Landmark Dr. / Greensboro, NC 27409
1-800-334-2004 / www.camco.net
z885079