Enclume DWR2 HS User manual

Enclume DWR2 HS User manual
Installation Instructions
Drill appropriate size hole. Hold metal Hold ends of straps together betwee Place thumb between straps at wall. Place item over flange. Insert bolt and
channel flat alongside plastic straps & thumb & forefinger and pull toward you Push thumb side to side, snapping off tighten until snug against item, then stop.
glide channel through the hole. until channel rests behnd wall. Ratchet straps level with flange of cap. Use machine screw or bolt to match
Minimum clearance behind wall: cap along straps with other hand until thread in metal channel.
only 17%". flange of cap is flush with wall.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement