ASCENSION
™
FP6717**
Ceiling Fan
A
5.75˝ dia
B
21° Blade Pitch
Blade Sweep= 54˝ dia
Net Hanging Weight: 18.44 lbs
A B
Fan w/6˝ downrod 13.49˝ 11.60˝
Fan w/12˝ downrod 19.49˝ 17.60˝
Fan w/18˝ downrod 25.49˝ 23.60˝
Fan w/24˝ downrod 31.49˝ 29.60˝
Fan w/36˝ downrod 43.49˝ 41.60˝
Fan w/48˝ downrod 55.49˝ 53.60˝
Fan w/60˝ downrod 67.49˝ 65.60˝
Fan w/72˝ downrod 79.49˝ 77.60˝
Available Finish
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction box capable of withstanding a load of at least 35 lbs.
BN Brushed Nickel with Brushed Nickel Blade
MW Matte White with Matte White Blade
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.
High
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
233 6659 127 0.44
53
MOTOR SPECS:
188 x 15 AC motor is designed for optimal performance with this fan.
Med
Low
161 4595
91 2544
181
280
Energy Guide FTC
0.31
0.19
25
9
BLADES:
A set of four 24˝ steel blades is included.
Power
(W ave
)
Total Air Delivery
(CFM ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
57 7071 30 124
CONTROL OPTIONS:
CW6717WH 3-speed wall control is included. Slide button wall control has 3 fan speeds and off button. Optional CW1,
CW5 and CWRL4WH wall controls—sold separately. Optional BTCR9, C4, CRL4WH and CRL8TS hand-held remote controls with receiver unit and BTR9 receiver unit are available—sold separately. Instructions are provided with each control.
DOWNROD OPTIONS:
Fan comes with a 1˝ dia. x 6˝ long downrod (DR1-6). Optional downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and
72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝. The fan can be mounted on a sloped ceiling up to 27°. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 27° and up to 42°. Call technical support for more information.
LOCATION USE:
Fan is rated for dry and damp locations.
