Deik Vacuum Cleaner, 2 in 1 Cordless Vacuum Cleaner, High-power Long-lasting 22.2V 2200mAh Li-ion Battery Powered Rechargeable Bagless Stick and Handheld Vacuum Vacuum User Manual

 Instruction manual
Contents
Explanation of Symbols
Read through the safety
Safety Instructions
= This device may be used by children aged 8 and over and by
m Make sure that the mains cable connected to the charging station does not present
a trip hazard.
Items Supplied and Device Overview
Joint
Before Initial Use
Intended Use 15 /N m Do not use the device if it is damaged. (, ! : /N
Safety Instructions 16 ecictons lo vont ner people with reduced physical, sensory or mental abilities or a 9 Ш 2 Release button for the motor unit CAUTION
- . . andle of the motor uni | | | | |
Items Supplied and Device Overview 18 A sonal injury and damage lack of experience and/or knowledge if they are supervised or /\ Danger of Electric Shock and Fire 4 Ventilation openings в Keep children and animals away from the packaging material. There is a danger of
Before Initial Use 19 to property. have received instruction on how to use the device safely and m Use and store the device only in closed rooms. Do not operate the device outdoors, 5 Motor unit suffocation’
Assembly 19 @ Supplementary information have understood the dangers resulting from failure to comply in rooms with high humidity or on hot surfaces. 6 Frame 1. Unpack all parts and check the items supplied for completeness (see the"ltems Sup-
Charging Up the Battery 20 I with the relevant safety precautions. m Never touch the device, charging station, turbo nozzle, mains cable or mains adapter 7 Turbo nozzle , a plied and Device Overview" chapter) and possible transport damage. If you find any
Use 94 u Read operating instruc- = Children must not play with the device with wet hands when these components are connected to the mains power. 8 Lever for releasing the joint lock damage to the components, do not use the device (!), but contact our customer ser-
tions before use! Cl d nt tb A d bv chil m Do not use the device if highly flammable gases are present in the air. Never operate o Cane contro amps b | vice department.
Cleaning the Device and Accessories 22 Mal Protection class Il = eaning and user Maintenance may Not be perrormea by cnii- the device in the vicinity of a gas source. A gone! amps © e turbo nozzle 2. Before using the device, remove all packaging materials and any labels that may be
Storage 23 dren, unless they are older than 8 years of age and are super- m Do not cover the device during operation in order to prevent it from catching fire. Do 12 Dust Container with filter on the device and are used for protection during transportation or for advertising.
Troubleshooting 24 TT Only use indoors! vised. not insert anything into the ventilation openings of the device and make sure that 13 Release button of the dust con- 3. Assemble the device and charging station (23) (see the “Assembly” chapter).
Technical Data 24 = Children younger than 8 years of age and animals must be kept these do not become clogged. o | | tainer 4. Fully charge up the battery (see the "Charging Up the Battery" chapter).
Disposal 25 WV) Energy efficiency class V away from the device and the mains adapter A rover gy or use the device in the vicinity of highly flammable materials (curtains, 14 On/Off switch for using the cord-
extiles, etc.).
: less vacuum cleaner
Removing the Battery 25 Safe electrical isolation = The device should only be used and stored out of the reach m Make sure that the mains cable is not squashed, bent or laid over sharp edges and 15 Stem Assembly
(transformer) of children and animals. Improper use can lead to Injuries and does not come into contact with hot surfaces. 16 Operating buttons on the stem:
2—@—& Polarity of the coax- electric shock. m The mains adapter should only be connected to a plug socket that has been properly © Switch on/off CAUTION!
ial connector (mains m [I'he device must always be switched off when it is not being used installed. The socket must also be readily accessible after connection. The mains + Increase suction power m Before you attach or detach any accessories, ensure that the device is not connected
voltage must match the technical data of the mains adapter. Only use suitable exten- — Reduce suction power . '
adapter) and before assembling, disassembling or cleaning the device. sion cables whose technical data is the same as that of the device or mains adapter armani on à to the mains power.
В . , sé OWitch the brush rotation in
= Only ever charge up the rechargeable battery using the charg- (see the “Technical Data” chapter).
Dear Customer,
We are delighted that you have chosen DEIK cordless vacuum cleaner.
Before using the device for the first time, please read the instructions through carefully
and keep them for future reference. If the device is given to someone else, these in-
structions should also be handed over with it.
The manufacturer and importer do not accept any liability if the information in these
instructions is hot complied with.
If you have any questions about the device and about spare parts/accessories, con-
tact the customer service department via our website: www.deik.co
Intended Use
* This device is designed for vacuum cleaning normal household dust.
— liquids or wet substances (e.g. wet carpet shampoo)
N On no account should the device be used to suck up the following:
— glowing ash, cigarette ends, matches, etc.
— inflammable or explosive substances
— very fine dust (e.g. concrete dust), ash or toner
— pointed, hard objects such as large pieces of broken glass
* The device is for personal use only and is not intended for commercial applications.
ing station and the mains adapter supplied with the device. Do
not use the charging station or mains adapter supplied with the
device to charge up any other devices.
= Never immerse the device, charging station, turbo nozzle, mains
cable or mains adapter in water or other liquids and ensure that
they cannot fall into water or become wet.
m If the device, the charging station, the turbo nozzle, the mains
cable or the mains adapter is damaged, it must be replaced by
the manufacturer or customer service department or a similarly
qualified person (e.g. specialist workshop) in order to avoid any
hazards.
/N Dangers of Injury
m Keep children and animals away from the device and packaging material. There is a
risk of injury and suffocation!
m Keep animals, hair, jewellery, wide clothing, fingers and all other body parts away
from the suction opening of the device. They could become stuck to the device.
m Remove the mains adapter from the plug socket in the event of a thunderstorm.
m Always pull the mains adapter and never the mains cable!
m Always check the device and accessories for damage before putting them into oper-
ation. Do not use them if they are damaged!
Avoiding Damage to Material, Property and the Device
m The device should only be used when it is fully and correctly assembled! The dust
container and filter must be inserted and must not be damaged! If the dirt were
to get inside the motor unit, this could damage the motor.
m Do not expose the device to extreme temperatures, wide temperature fluctuations,
open fire, direct sunlight, and do not expose the motor unit to any moisture or wet
conditions.
m Do not drop the device or subject it to heavy impacts.
m Empty and clean the dust container after each use. The filter must also be regularly
cleaned in order to prevent overloading of the motor.
the turbo nozzle on/off
Nu
17 Handle
18 Crevice nozzle
19 Brush nozzle
20 Release button
21 Mains adapter
22 Socket for connecting the mains
adapter
23 Charging station
7
Nozzles
Turbo nozzle (7)
The turbo nozzle (7) is designed for vacuuming floors. It has a rotating cleaning brush to
make it easier to pick up hair and fluff.
Crevice nozzle (18)
The crevice nozzle (18) is ideal for places which are hard to get to, such as corners,
crevices or recesses.
Brush nozzle (19)
Attaching / Removing Suction Nozzles
< The crevice nozzle (18) and the brush nozzle (19) are inserted as far as they will go into
the suction opening (11) of the cordless vacuum cleaner. Pull them out to remove them.
« The turbo nozzle (7) is inserted as far as it will go into the suction opening of the
frame (6). Make sure that the pins in the frame (6) fit into the designated recesses in
the turbo nozzle (7). To remove it, press the release button for the turbo nozzle and
pull it out at the same time.
Inserting / Removing the Dust Container
в ° Inserting: Insert the two locking lugs on the motor unit (5) into
Ä x \ the matching openings in the dust container (12) and plug
"hd them together. The dust container (12) must be heard to en-
gage in place.
« Removing: Hold the device with the dust container (12) at
the bottom. Grip the dust container (12), press the release
button (2) and remove the motor unit (5) (see picture).
Inserting / Removing the Cordless Vacuum Cleaner
* Inserting: Hold the cordless vacuum cleaner with the suction
opening (11) at the bottom and first insert it into the frame (6)
at the bottom. Then press the handle (3) towards the frame (6)
until it is heard to engage in place.
* The device should only be used as described in these instructions. Any other use is vive.
deemed to be improper. Should the device become stuck, switch it off immediately.
Model: EV660 + The following are excluded from the warranty: all defects caused by improper handling, m Please take particular care when cleaning stairs so that you do not stumble and fall.
damage or unauthorised attempts at repair. This also applies to normal wear and tear.
The brush nozzle (19) is used for vacuuming upholstery and textiles and for removing
dust from delicate objects such as picture frames, lamp shades, keyboards, books etc.
6 7 EN EN 8 9 EN EN 10 11 EN
Removing: Press the release button (2) on the side of the Use a
handle (3) and pull out the cordless vacuum cleaner.
/N CAUTION!
m Never hold the suction nozzle (11) close to parts of the body or animals during use
and never reach inside in order to avoid injuries or becoming stuck to it. Should the
N Emptying the Dust Container and Cleaning the Filter Troubleshooting Disposal
1. Switch off the device. If the device stops working properly, first check whether you are able to correct the prob- <>, The packaging material is recyclable. Please dispose of it in an environmentally
2. Detach the motor unit (5) from the dust container (12): Hold the device with the dust lem yourself. vw 5 friendly manner and take it to a recycling centre.
container (12) at the bottom. Grip the dust container (12), press the release but-
ton (13) and remove the motor unit (5) (see the “Assembly” chapter, “Inserting / Re-
. . . /N Do not attempt to repair a defective electrical device yourself!
moving the Dust Container” section).
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
X Dispose of the device in an environmentally friendly manner. It should not be
cordless vacuum cleaner become stuck, switch the device off Immediately. UC J 3. Hold the dust container (12) over a dustbin. Problem Possible cause / solution used electrical and electronic devices.
= Only switch on the device once you have made sure that the dust container (12) and - | | 4. Pull the filter mount out of the dust container (12) (see The device does «ls the battery flat? Charae Us the bate BE You can obtain more information from your local authorities.
Charging station the filter are inserted correctly. 5. To park the cordless vacuum cleaner from time to time, put the frame (6) into the up- picture). not start. y Ta ge tp Y =, Non-rechargeable and rechargeable batteries should be removed prior to dis-
+ Assembling: Plug together the two parts of the charging = Always switch off the device before replacing any accessories. right position. The joint (1) locks in place when the frame (6) and the turbo nozzle (7) 5. Empty the dust container (12). » Is the battery too weak? Charge up the battery. NX posal of the device and disposed of separately from the device. To protect the
station (23) (see picture). || Оп по account should the device be used to suck up the following: form a 90 angle (upright position). To release the upright position, hold the turbo 6. The filter mount contains a small basket that protects the «Is the dust container (12) full? Empty the dust container. ON environment, non-rechargeable and rechargeable batteries may not be disposed
- Taking apart: Press the release button (20) at the bottom — 19498 or wet Substances (e.g wet carpet shampoo) nozzle (7) with your foot and tilt the frame (6) downwards. HEPA filter Twist the small basket a little bit and remove it. + Is the filter heavily clogged up? Clean the filter. “ of with normal household waste, but must be taken to suitable collection points.
on fhe pack and pal both parts of the charging station (23) - rable or explosive substances. etc. Handheld Vacuum Cleaner 7. Tap out both parts and clean them with a soft brush if necessary. Low suction force. | - Is the suction opening/nozzle blocked? Switch off the device Also note the relevant statutory regulations governing the disposal of batteries.
NE et uel cha | on (23) th hold _ very fine dust (e.g. concrete dust), ash or toner 1. Remove the cordless vacuum cleaner from the frame (6). To do this, press the release 8. The filter and the plastic parts can also be rinsed with clear, lukewarm water. and remove the blockage.
n the back of the charging station (23) there are holders _ pointed. hard obiects such as | i f broken al button (2) on the side of the handle (3) and pull out the cordless vacuum cleaner. CAUTION: Do not use any cleaning agents! - Itis also possible that some items will be too big / heavy to be 2 ina the Batt
for storing the crevice and brush nozzle (19). Place the pointed, hard objects such as large pieces of broken glass | | | emoving the Battery
crevice nozzle (18) in the top holder and the brush noz = Empty and if necessary clean the dust container (12) after each use (see the "Clean- 2. Plug the crevice or brush nozzle (19) into the suction opening (11). The cordless 9. Letall parts dry completely in the air before you reassemble them. CAUTION: Never picked up by the device.
и . . . i |
Zle (19) in the bottom holder. ing the Device and Accessories” chapter). vacuum cleaner can also be used without a nozzle. assemble wet or damp components or attach them to the motor unit (3)! The Dust escapes from | Check whether the dust container (12) and filter have been /N CAUTION!
To pull out the brush nozzle (19), grip and pull the m Switch the device off after each surface has been cleaned as this will considerably 3. To switch it on and off, press the switch (14) next to the handle (17). | o an capes | inserted correctly and adjust the fit if necessary. : |
© P ; grip Р increase the operating time on each battery charge. Charge up the battery after use 10. Attach the dust container (12) to the motor unit (5): First insert the two locking lugs on the device during +s the HEPA filter worn or damaged? Order a new HEPA filter m The motor unit (5) may only be opened for the disposal of the battery.
1 pristes at 1 oP ene. haraina station (23 (see the "Charging Up the Battery" chapter). | C - - - the flat side of the motor unit (5) into the matching openings in the dust container (12) cleaning. via www.service-shopping.de and replace it. m Take care when opening the motor unit (5); avoid short-circuits.
ook the frame (6) into the charging station (23). leaning the Device and Accessories and then press the two components together. The dust container (12) must be heard e the dev а iv in the charaina station (2377 = Do not open the battery as there is a danger of a short-circuit: irritant vapours ог
© * Ifthe suction performance diminishes, empty the dust container (12) and/or A to engage in place. The battery is not © he évice a e (21) y In ted coro ; a ont N caustic liquids may also escape.
- charge up the battery. CAUTION! * Is the mains adapter connected correctly to the plug Do not the batterv to st light heat or fire. There | isk of exolosi
Charging Up the Battery When the device is switched on or connected to the charging station (23), the | о | Cleaning the Turbo Nozzle patio Control socket and the charging station (23)? m Do not expose the battery to strong sunlight, heat or fire. There is a risk of explosion.
CAUTION battery status is displayed. If all three battery control lamps (9) are lit up, the а oan ihe ter after each use to maintain good performance and prevent overheating To make it easier to clean, the brush can be removed from the turbo nozzle (7). lamps (9) are off. |‘ Is the plug socket defective? Try another plug socket. This device contains a built-in battery pack. This must be removed prior to disposal of the
battery is full. The fewer lamps are on, the lower the battery charge. s ton of device before doi leani 1. Press the release button on the turbo nozzle (7) and remove it. ° Check the fuse of the mains connection. used device in the following way:
m Switch off the device before doing any cleaning. A m” directi — Undo th the side of th { + (5
m The battery may only be charged using the charging station (23) or the mains adapt- 2. On the bottom of the turbo nozzle (7) slide the switch in the direction. ° A new odour is normal when the device is used for the first ndo the screws on the side of the motor unit (5).
er (21) which is supplied with the device. Do not use the mains adapter (21) or the Floor Vacuum Cleaner = Keep the motor unit (5), the charging station (23), the turbo nozzle (7), the mains 3. Flip open the catch (see picture). Unusual odour time; it disappears after a while. Take apart the side parts.
charging station (23) to charge other batteries.
To operate the device as a floor vacuum cleaner, the cordless vacuum cleaner and the
turbo nozzle (7) must be inserted in the frame (6) (see the “Assembly” chapter).
adapter (21) and the mains cable away from water or other liquids to prevent electric
shocks. Only the dust container (12) with the filter and the crevice nozzle (18) and
4. Take out the brush and remove any contamination.
Remove the battery pack from the device.
N SON =
m The cordless vacuum cleaner must be switched off before charging takes place. 1. Take the frame (6) with the cordless vacuum cleaner from the charging station (23) brush nozzle (19) may be cleaned with water. However, all parts must be com- 5. Reinsert the brush: First insert the end with the triangular First disconnect the red, then the black connecting cable.
m Store the cordless vacuum cleaner with the frame (6) in the charging station (23). 5 Hold the turbo nozzle (7) with your foot and tilt the frame (6) To This will pletely dry before they are put back into the device. recess, then the end with the metal pin. Dispose of the battery in an environmentally friendly manner (collection points or
~onneat ihe charging station damaged. mains power. Do not allow the battery to run “release the upright position. m The filter is neither machine-washable, dishwasher-safe nor suitable for tumble drying. 6. mu the catch shut and slide the 4 switch in the A direc- retailers).
. Never clean the filter with soap or other cleaning agents to prevent damage to the filter. lon.
; ; ; 3. The stem of the frame (6) contains the operating buttons (16):
A It IS essential that you charge up the battery fully before you first use the de- O Switch on/off = Only ever dry the filter in the air, and never use a hair dryer to do so.
vice in order to achieve the maximum charging capacity. If the battery is fully | . . .
discharged during use, it must be fully charged up again before it is next used + Increase suction power by one level = Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de- Storage
: : — Reduce suction power by one level vice and accessories. These could damage the surfaces. 1 Insert th di | into the f 6
. Insert the cordless vacuum cleaner into the frame (6).
1. Place the assembled charging station (23) in a dry location near to a properly in- aime SWitch the brush rotation in the turbo nozzle on/off . . . ( ÓN (6)
stalled, easily accessible plug socket Switch on the cordless vacuum cleaner and guide the turbo nozzle (7) over the floor * To ensure optimum performance of the device, you should empty the dust contain- 2. Hook the frame (6) into the charging station (23).
er (12) (see "Emptying the Dust Container and Cleaning the Filter" below) after eve
2. First plug the barrel connector on the mains cable into the socket (22) of the charging Switch on the brush for more in-depth cleaning. When the brush is switched on, the er a Pring 9 ) y 3. If necessary, fold back the stem (15) to Save space.
station (23) and then connect the mains adapter (21) to the plug socket. control lamps (10) on the turbo nozzle (7) light up. e" necessa Wide down the device and accessories with a soft. damp cloth and then 4. Connect the charging station (23) to the mains power.
3. Hook the frame (6) into the charging station (23). The battery control lamps (9) will 4. Fold down the stem (15) to vacuum under furniture. To do wipe them dry Р Р
flash during the charging process. this, pull the lever (8) beneath the handle (17) upwards. This » Remove hair and Пий from the nozzles
| the joint (1) of the f 6) and makes it flexible.
4. [fall three battery control lamps (9) light up constantly, the battery is fully charged up. oosens the joint (1) of the frame (6) and makes it flexible * Check the mains adapter (21) and the mains cable for damage at regular intervals.
To allow easy handling, the joint of the turbo nozzle (7)
can be moved to the left/right as well as up and down.
* Keep the device ready for operation and charge up the battery after each use (see
the "Charging Up the Battery" chapter).
All rights reserved.