Meagle 3/8” Cordless Ratchet Wrench Set Ratchet Wrench User Manual

Meagle 3/8” Cordless Ratchet Wrench Set Ratchet Wrench User Manual
12 VOLT 3/8"
LITHIUM ION
RATCHET WRENCH
OWNER’S MANUAL
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
Some dust created by power sanding contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. An example
of this type of chemical is lead from lead based paints, Crystalline Silica from bricks and cement or other masonry, Arsenic and Chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure: work in a well ventilated area and
work with approved safety equipment, such as dusk masks that ar
reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before
operating this machine.
1.
2.
3.
4.
3/8 in. Square Drive
Directional switch
0n/0ff Trigger
Battery Status Display
5.
6.
7.
8.
Handle
Battery pack
Push lock button
Battery charger
Power: ............................................................12V Li-ion d.c./Ah Li-ion
Drive Style: ................................................................ 3/8 in. Square Drive
Max. Torque: ............................................................................... 22 ft. lbs.
No-load Speed:........................................................................... 230 RPM
Battery Charger Voltage: ................................... AC 100-240V / 50-60 Hz
Battery Charger Output: ................................................ 13.5v @2.2Amps
Battery Charge Time:............................................................ Aprox. 1 hr.w
6
4
2
7
5
3
1
8
1
2
WARNING! READ, UNDERSTAND AND FOLLOW ALL
INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS
TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
WORKPLACE SECURITY
1. Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
2. Do not use power tools in explosive environments, e.g. in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and people away during the use of the tool. Distractions can cause you to
lose control of the tool.
ELECTRICAL SAFETY
1. It is necessary that the power tool plugs are adapted to the base. Never modify the plug in
any way. Do not use adapters with earthed tools. Unmodified plugs and adapted bases
reduce the risk of electric shock.
2. Avoid contact with grounded objects such as pipes, radiators, stoves and refrigerators.
There is an increased risk of electric shock if your body is in contact with grounded surfaces.
3. Do not expose power tools to rain or wet conditions. The penetration of water into a tool
increases the risk of electric shock.
4. Do not misuse the cable. Do not use the cord for carrying, pulling or unplugging the tool.
Keep the cord away from heat, oil, edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a tool outside, use an extension cord suitable for outdoor use. Using a
cable suitable for outdoor use reduces the risk of electric shock.
6. If it is necessary to use the tool in a location with moisture, use a secure supply with
residual current device (RCD). The use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
1. Be aware of what you are doing and use common sense while using the tool. Do not use a
tool when you are tired or under the influence of drugs, alcohol or medication. A moment of
distraction while using a tool can cause serious personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such as dust masks,
non-slip safety shoes, helmets or ear protection used in appropriate conditions will reduce
the risk of injury.
3. Avoid accidental starting. Make sure that the switch is in the off position before plugging in
to power or battery, collect or transport. Carrying tools with your finger on the trigger or
plugging the tool in with the trigger pulled can cause accidents and injury.
4. Remove any adjusting key before turning the tool on. A key left attached to a rotating part of
the tool may result in personal injury.
5. Do not rush. Maintain proper footing and balance at all times. This allows better control of
the tool in unexpected situations.
6. Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves
away from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts.
7. If devices for connecting equipment for extraction and dust collection are supplied, make sure
they are connected and properly used. Use of dust collection can reduce risks due to dust.
USE AND MAINTENANCE OF THE TOOL
1. Do not force the tool. Use the right tool to the application being performed. A suitable tool will
do the job better and more safely if used for the purpose for which it has been built.
2. Do not use the tool if the switch does not allow to turn it on or off. Any tool that can not be
controlled by the switch is dangerous and must be repaired.
3
USE AND MAINTENANCE OF THE TOOL
3. Disconnect the power source supply or battery block tool before changing accessories or
before storing the tool. These preventive safety measures reduce the risk of accidental
starting of the tool.
4. Keep the tool off away from children and do not allow to be used by people who are not
familiar with the tool. Tools are dangerous in the hands of inexperienced.
5. Do not force the tool. Use the right tool for the application being performed. A suitable tool
will do the job better and more safely if used for the purpose for which it has been built.
6. Do not use the tool if the switch does not allow you to turn it on or off. Any tool that can not
be controlled by the switch is dangerous and must be repaired.
7. Disconnect the power supply and battery charger before changing accessories or before
storing the tool. These preventive safety measures reduce the risk of accidental starting of
the tool.
8. Keep the tool away from children and do not allow tool to be used by people who are not
familiar with the operation of the tool. Tools are dangerous in the hands of inexperienced
operators.
9. Make sure the tools moving parts are not aligned or blocked, that it has not broken any
parts or any other condition that may affect the operation of the tool. In case of damage,
take the tool to a repair service before using it again. Many accidents are caused by poorly
maintained tools.
10. Tools used for cutting, with sharp pieces that have had good maintenance, are less likely to
become blocked and are easier to control.
11. Use the tool, accessories and blades, etc. according to these instructions, taking into
account the working conditions and the work to be done. The use of the tool for operations
other than those provided can lead to dangerous situations.
PRECAUTIONS FOR USE
1. Do not use any other charger than the one specified by the manufacturer. A charger that fits
to a type of battery can cause a risk of fire when used with other types of batteries.
2. Do not use tools with batteries other than those specified. The use of any other type of
battery may create a risk of injury and fire.
3. If the batteries are not used, keep them away from other metal objects such as clips, coins,
keys, nails, screws or other small objects that can lead to a connection from one terminal to
another. Short-circuiting the terminals of a battery can cause burns or fire.
4. In bad conditions, liquid may be ejected from the battery; avoid any contact. In case of
accidental contact, flush with water. If the fluid comes into contact with eyes, seek medical
assistance. The ejected battery fluid may cause irritation or burns.
CARE AND MAINTENANCE
1. Repairs must be performed by a qualified expert, using only identical replacement parts.
This will ensure that the safety of the tool is maintained.
2. Remove the battery from tool and disconnect the charger from the wall outlet before cleaning.
CLEANING
1. Keep protection devices, air vents and the motor housing as clean (dust free) as possible.
Clean the tool with a clean cloth or clean with compressed air at low pressure.
2. We recommend cleaning the tool directly after each use.
3. Clean the tool regularly with a damp cloth and a little soap. Do not use any cleaner or
detergent, they can damage the plastic parts of the tool. Ensure that no water enters the tool.
MAINTENANCE
1. Recharge the battery at least once a year to maintain battery life.
ENVIRONMENTAL PROTECTION
This device uses electronic components, so they should not be deposited with household
garbage! Please help by collaborating to protect resources and the environment. Dispose of
these products through relevant recycling services, if any. For questions on this matter,
please contact your local waste management or a specialized site.
4
OPERATION
INTENDED USE
The tool is intended for quickly tightening and loosening nuts, bolts and other fasteners.
Not intended to be used in place of a torque wrench or impact wrench, this tool will not
break loose seized nuts. Always make sure to use a calibrated torque wench to tighten
your fasteners to the correct specification as directed in your shop manual.
BEFORE USE
Before turning on the tool, read the following notes:
1. Charge the battery with the provided charger. A fully discharged battery recharges in about
one hour.
2. Use only appropriate sockets and bits.
CHARGING THE BATTERY
1. Remove the battery (6) from the tool by depressing both battery lock buttons (7) and pulling down.
2. Check if the power voltage on the charger's (8) rating plate corresponds to the voltage available.
3. Plug charger's power lead into the top of the battery. The red LED indicates that the battery
is charging. Once charged, the red LED turns off and the green LED stays on continuously.
5. During charging, it is normal for the battery to warm slightly. If the battery will not charge
check:
- That the socket has voltage.
- That the charger contacts are reliable.
- Verify there is no damage to the charging cord.
Starting Operation
1. Inserting the Battery: Only use the original brand of Li-ion batteries with the voltage listed
on the nameplate of your power tool. Using other batteries can lead to injuries and pose a
fire hazard. Set the direction switch to the center position to protect the power tool from
accidentaly starting. Insert the charged battery Into the handle until you feel it engage and it
sits flush against the handle.
2. Reversing the Rotational Direction: The direction switch (2) is used to select the rotational
direction of the ratchet to be either clockwise or counter clockwise.
Clockwise - Right Rotation: For driving in screws and tightening nuts, turn the direction
switch through to the left stop.
Counter Clockwise - Left Rotation: For loosening and unscrewing screws and nuts, turn
the direction switch through to the right stop.
(NOTE: there are some styles of screws, nuts and bolts that are reverse threaded. Use the
above directions inversely.)
3. Switching On and 0ff: To start the tool, press the On/off trigger (3) and keep it pressed. To
switch off the tool, release the On/0ff trigger.
4. Working Advice: Apply the power tool to the screw/nut only when it is switched off.
Make sure to verify the socket is securely seated over the detent ball (1) to assure socket
will not slip off during use. The torque depends on the impact duration. The maximum
achieved torque results from the sum of all individual torques achieved through impact. The
maximum torque is achieved after the impact duration of 6-10 seconds. After this duration,
the tightening torque is increased only minimally. After maximum torque has been achieved
using motor the tool can be powered down and further manual torque can be applied up to
80 ft pounds. Use an actual breaker bar if further tightening is required. The actual achieved
tightened torque is always to be checked with a torque wrench.
DISPLAY BATTERY STATUS
Three color LEDs (9) indicate the status whenever the ON / OFF button is pressed.
- All LEDs are lighted: the battery is fully charged.
- Yellow and red LEDs lighted: the battery has charge.
- Red LED lighted: the battery is almost empty and needs to be recharged.
5
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement