QuickTrick Roll on Turnplates Set User guide

QuickTrick Roll on Turnplates Set User guide
 Proudly Made in the USA
Always ensure you are driving onto the center
bolt to avoid plate catching on sides while
spinning!
Enclosed:
Two turn plates
Instructions sheet
1. Begin by Placing the turn plates in front each wheel
2.Push or drive on
a. At 5/16 of an inch you should have no problem rolling on
b. The bottom plate does not have to be square with the wheel because you
will mark 0 on the disc but wheels should be straight.
3.Use a dry erase marker or scotch blue tape
a. Mark the 0 position to the 0 on the base plate,
b. Once you're finished simply wipe the dry erase off or remove tape and
you're ready for the next car
No pins to reset, or pointer to get smashed. That's it!
We wanted our plates to be extremely user friendly and our hopes are that we
have accomplished that with what we have created.
[email protected] 205-475-2419
Direct all calls and email to
Manufacturer for technical
assistance and/or damage
D
j—
©
oO
E
D
j—
D
N
O
Го
—
fd
O
<
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement