- VANMASS
- Universal Wireless Car Charger Mount, Leading 15W Qi Fast Charge, Built-in Battery, Auto-clamp, Ideal for iPhone 11/11 Pro/XR/XS/X/8, Samsung S20/Note 10/S10/S9/S8/S7, Pixel/LG【Two Patent】
- User manual
VANMASS Universal Wireless Car Charger Mount, Leading 15W Qi Fast Charge, Built-in Battery, Auto-clamp, Ideal for iPhone 11/11 Pro/XR/XS/X/8, Samsung S20/Note 10/S10/S9/S8/S7, Pixel/LG【Two Patent】 Car Charger User Manual
Add to my manuals11 Pages
advertisement
User Manual
12h
service
@
vanmasslife.com
Get 12-hour quick reply
VMPI0053A
CATALOG
EN
Product overview................................................. 02
Compatibility........................................................ 04
Align the phone to the coil position .................... 05
The tips of LED indicator...................................... 06
Assembly and installation steps .......................... 07
Switch on power supply, wireless charging........ 12
Instruction of clamp arms.................................... 13
Specifications....................................................... 15
Attentions ............................................................. 16
FAQs ...................................................................... 16
01
Product overview
Hidden Pressure Switch
(Close Button)
Wireless Charging
Sensing Area Clamp Arms
02
Silicone Pads
Bottom Tray
Release Button
USB-C Charging Port
Grip Nut
Screw Knob
Ball Joint
Twist-lock Air Vent Clip
3-level Air Vent Clip Lever
Ball Joint
USB-A Fast
Charging Port
USB-A Standard
Charging Port
Negative Pole
Contactor
3-level Air Vent Clip
LED Indicator
Car Charger
Positive Pole
Contactor
03
Compatibility
Please notice:
1. Make sure your phone could be compatible with Qi wireless charging before using this wireless car charger.
2. Use a car charger to connect the wireless car charger mount in full charging process.
3. Connect the wireless car charger mount by QC 3.0 car charger if you have a wireless fast charging mobile phone.
Align the phone to the coil position
Please adjust the bottom tray of the wireless car charger holder to place your phone on the suitable phone model position, so that the phone's central wireless charging induction area could align to the circular wireless charging induction area on the car charger.
04
Smartphone
Qi-Compatible Phones iPhone Xs Max, iPhone XR, iPhone XS, iPhone X, iPhone 8 Plus, etc.
+
Car Charger
5V 2A
+
12V 1.5A
Quick Charge 3.0
=
=
Output Power
5W
7.5W
Samsung Galaxy
S10+, S10e, S10,
S9+, S9, S8+, S8,
S7 Edge, S7, Note 9,
Note 8, etc.
+
12V 1.5A
Quick Charge 3.0
= 10W
LG G7 ThinQ,
V30, V30S ThinQ,
V35 ThinQ, V40 ThinQ, etc.
+
12V 1.5A
Quick Charge 3.0
= 15W
90°
Scale Phone model
S
M
L
XL iPhone 8 iPhone X / Xs / Samsung Galaxy S7 / S8 / S9 iPhone Xs Max / XR / 8 Plus
Samsung Galaxy S7 Edge / S8+ / S9+ / S10 / S10e
Samsung Note 8 / Note 9 / S10+
05
The tips of LED indicator Assembly and installation steps
Method 1 - Using with the 3-level Air Vent Clip
Open
Tighter
I.
Tight
2.5mm-3.5mm /
0.10inch-0.14inch
Blue: Charging
State of Charging
Power on
Standby
Charging
Red: Not Charging
LED Indicator Display
The red indicator turns off after
3 seconds.
Indicator turns off.
Blue indicator lightening.
06
Metal or other foreign matter detection/use of incompatible car charger
The red indicator flashes 10 times:
1 second on, 1 second off, then off.
Low battery warning
The charger sounds the alarm when the inner lithium battery is in the lower power. The alarm is a charging signal. The clamp arm can not close when it lacks energy.
II.
Tighter
1.8mm-2.5mm /
0.07inch-0.10inch
III.
Tightest
1.8mm / 0.07inch
Attention:
1. The air vent clip was opened when the lever turns to the right
(as shown in picture1). The lever has 3-level thickness options.
The air vent clip will be tighter gradually when turning the lever to left. Please adjust the air vent clip lever suitably according to the thickness of your air vent blade.
2. Please adjust the air vent clip properly, and do not use the air vent clip too tight. When the air vent clip is available in middle thickness, please do not adjust it to the smallest thickness, otherwise, the air vent clip might be damaged.
07
08
1. Unscrew the grip nut from the car mount and remove it. 3. Push the ball joint firmly into the groove on the back of the car
mount, then tighten the grip nut.
4. Find a suitable place in your automobile outlet, insert the car
mount. Push the air vent clip lever according to the thickness
of the blade, then fix the car mount. Adjust the angle of the car
mount to fit the sight line.
09
10
Method 2 ‒ Using with the twist-lock air vent clip (Wide suitability, compatible with horizontal and vertical air vent blade)
1. Unscrew the grip nut completely, let the ball joint through the ball joint into the groove in the back of the car mount.
3. Twist the screw knob to adjust the opening size of the clip to fit the air vent.
2. Tighten the grip nut.
4. Find a suitable place to insert the car mount. Tighten the screw knob to fix the car mount then adjust the angle of the car mount to fit your sight.
11
Switch on power supply, wireless charging
1. Plug the car charger into the car's cigarette lighter base.
Instruction of clamp arms
1. Touch the release button on either side of the car mount and the clamps will open automatically.
2. Plug the charging cable USB-A connector into the QC 3.0 fast charging port of the car charger. Insert the charging cable
USB-C connector into the charging port of the car charger mount to turn on the power.
2. Put the phone into the car mount (to trigger the hidden pressure switch), then the clamps will grip the phone automatically and the wireless charging will start in a few seconds. The indicator light will turn blue.
12
Please use QC 3.0 car charger to connect with the wireless car charger mount.
Tips: To realize the fast charging function, the charging cable
13
14
3. Please press the top half of the phone to trigger the hidden pressure switch if the clamps do not close (close button).
4. After using, please press the button on either side of the wireless car charger, then the clamp arms automatically pop up, so that you could take out the phone.
Specifications
Product Name
Model
Input
Output
Charging Induction Distance
The Maximum Voltage of the
Charger's Lithium Battery
Working Temperature
4.2V
Applicable Model
Package List
Automatic Car Mount Wireless Charger
CTVK08
5V 2A /12V 1.5A
15W (Max)
≈(4-6)mm/(0.16-0.23)inch
0°C-40°C/32℉-104℉
Compatible with iPhone, Samsung,
LG, Moto etc. (4-6.5 inches phones supporting wireless charging)
Automatic Car Mount Wireless
Charger ×1, Charging Cable ×1,
Fast Charge Car Charger ×1,
Air Vent Clip ×2, User Manual ×1
Product Name
Model
Input
Output
Working Temperature
Fast Charge Car Charger
CCVZ18
12V-24V
USB1: 3.6-6.5V 3A, 6.5-9V 2A,
9-12V 1.5A
USB2: 5V 2.4A
0°C-40°C/32℉-104℉
The parameters above are derived from the laboratory of VANMASS®.
The actual parameters would be different because of products and other factors. The image shown here is indicative only.
15
Attentions
1. Please install and adjust the car mount to the suitable position in advance. Do not install or adjust the car mount during driving.
2. Do not install the car mount on the place where may obstruct airbag working or driving.
3. Please do not disassemble the car mount.
4. Please turn on car air-condition (fan) in hot day or using the wireless charger for a long time, it is helpful to cool down the wireless car charger mount and let the charging speed up.
5. Please connect the wireless car charger mount to power supply, at the same time, please warm up charger mount from hot air blowing out of the vent. Because when the temperature is lower than 0℃ (32℉), the charger's inner lithium battery would be ineffective which may cause the clamps can not lock.
6. Keep the wireless car charger away from children.
7. WARNING: hazardous moving parts keep, fingers and other body parts away.
FAQs
Clamp arms not working
16 hidden pressure switch is stuck. Please activate the hidden switch of the wireless car charger.
2. If there is “Beep” warning when moving the wireless car charger switch button, it means the Built-in Lithium Battery is out of battery. Please insert the cable to connect the charger with QC
3.0 car charger for power supply.
3. Low temperatures can shorten the battery life, which may cause the clamps do not work properly. Please insert the cable to connect the wireless car charger with QC 3.0 car charger for power supply and turn on the warm wind blowing of the car, to rise the inside temperature of your vehicle.
The suitability of car air vent
Cannot support non-intensive, circular or special-shaped air vent.
The suitability of phone case
If the phone case is as the follows, it will not suitable for this product: Too thick (>4mm / 0.16 inch) or with a bumpy, shape bracket, metal sticker attached, credit card, Popsockets etc.
17
18
Unable to charge / slow charge / red light would not put out
1. Please check if the USB cable connected or the USB cable is defective.
2. Please ensure that your phone supports wireless charging.
3. Please check your phone case to sure whether it could support wireless charging. (Kindly check “the suitability of phone case”)
4. Adjust the wireless car charger’s bottom tray. Align your phone to the wireless charging sensing area.
5. Double check to see if there is an issue with the car charger/in-car USB port. (Please plug the cable into QC 3.0 car charger if your phone supports fast charging. Normal 2.4A /2.1A wireless fast charging so that the phone will charging slowly or even can not charging.)
6. The red light turns on and would not put out, which means the wireless car charger mount detects metal, foreign matter or incompatible car charger. Please check whether the phone aligned to the coil position or not, the phone case suitability, and the car charger compatibility.
High temperature warning
High temperatures can also cause slow charging speed and wireless car charger malfunction. (Possible reasons for a high temperature: GPS; too many APPs are running at the same time; the in-car temperature is too high; direct sun light; hot air coming out from the air vent while the wireless car charger is installed at the air vent.)
Official Email: [email protected]
WARNING
1. Risk of Fire and Burns. Do Not Open, Crush, Heat (above manufacturer's specified maximum temperature) or incinerate. Follow Manufacturer's Instructions.
2. Please do not replace the battery by yourself. Turn to professional maintenance staff to replace the battery if needed. Wrong reassembly or improper battery replacement may lead to fire or injury.
FCC ID Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from hat to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any undesired operation.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project