TrekPow G22 Jump Starter User Manual
The TrekPow G22 is a powerful and versatile jump starter that can get your car going in an emergency. It also features a built-in flashlight and can charge your phone or tablet with its USB outputs. With multiple charging options, it's easy to keep your G22 powered up, ready to use when you need it.
Advertisement
Advertisement
Advertisement
Key features
- 12V/6A DC output for jump-starting vehicles
- Type-C input/output port for charging and discharging
- QC 3.0 USB output for fast charging
- Built-in flashlight
- Clear battery indicator
- Power button for easy control
- Manual overload button on the clamps for safety
Frequently asked questions
Press the Switch/Power button to check the battery level. The indicator lights will show the battery level as a percentage.
Charging time depends on the charger used. It takes 12.5 hours with a 5v 1A charger, 6.5 hours with a 5v 2A charger, and 4 hours with a 5v 3A charger.
Yes, you can connect your phone or tablet to the TrekPow G22 via a USB cable (not included) to charge it.
Hold the power button to turn on the flashlight. Press the button again to toggle between flash and turn off the flashlight.
User questions
The document does not specify the availability of updated clamps with these features. Contact Trekpow customer service for inquiries.