AIMS PICOGLF20W12V120VR Specification

AIMS PICOGLF20W12V120VR Specification
Inverter Output Specifications:









Continuous Output Power: 2000 Watts
Surge Rating: 6000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Bypass terminal breaker - 30 amps
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
Input Specifications









Nominal Input Voltage: 12.0Vdc
Minimum Start Voltage: 10.0Vdc
Low Battery Alarm: 10.5Vdc-11.0Vdc
Low battery Trip: 10.0Vdc-10.5Vdc
High Voltage Alarm: 16.0Vdc
Low battery Voltage Restart: 15.5Vdc
Idle Consumption: 28 Watts
Charger breaker - 20 amps
Power Saver Mode Idle Consumption: 12.7 watts
Charger Specifications






Output voltage: Depends on battery Type
Charger Rate: 70A
Over Charge Protection Shutdown 15.7V
Selectable Charge setting based on battery type
Adjustable charge current off-20%-100%
Four Stage Smart Charger
Transfer Switch Specifications


30 amp automatic transfer switch
10 ms (max)
Dimensions


Unit Weight: 41 lbs.
Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches


Shipping Weight: 53 lbs.
Shipping L x W x H 23.5 x 13.0 x 12.5 inches
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement