Enabling Devices 4057W Charley Chameleon Manual

Charley Chameleon #4057
USER’S GUIDE
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
[email protected]
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
Three different activations!
We’ve adapted this cute chameleon so you can choose three
different light and sound options. Press your switch once and rain
forest sounds play while soft lights transition gradually from one
color to the next. Press your switch a second time and tropical tunes
play while the light colors jump from one to the next. The third time
you activate your switch, only the lights will shine. The fourth switch
activation turns Charley off. Also works without a switch. Charley has
an auto shut off after 45 minutes. Size: 14" x 9"W x 7"H. Requires 3
AA Batteries. Weight: 1 lb.
5. Actuate your external capability switch, once and rain forest
sounds play while soft lights transition gradually from one color
to the next. Press your switch a second time and tropical tunes
play while the light colors jump from one to the next. The third
time you activate your switch, only the lights will shine. The fourth
switch activation turns Charley off. Also works without a switch by
squeezing Charley Chameleon’s front left foot. Charley has an
auto shut off after 45 minutes.
6. When finished using Charley Chameleon turn his ON/OFF switch
to off to prevent false activations and to prevent battery drain.
Operation:
1. Charley Chameleon requires 3 AA batteries (Not included) to
operate. Use alkaline batteries only (e.g. Duracell or Energizer
brand). Do not use rechargeable batteries or any other type of
batteries because they supply lower voltage and the unit will not
perform properly. Never mix old and new batteries together or
different brands or types together.
2. The battery compartment is located in the Velcro pocket under
Charley Chameleon’s neck. Open the flap then, using a Phillips
head screwdriver open and remove the batter cover. Next install
3 AAA batteries paying close attention to proper battery polarity.
3. Replace the battery compartment cover and secure it with the
screw. Set the ON/OFF switch to ON.
4. Connect Charley Chameleon to any external capability switch (not
included) via the jack located at the end of his cord. Charley
Chameleon is equipped with a 1/8" jack for use with external
capability switches with a 1/8" plug. Make sure to plug your
switch all the way in. There should be no gaps.
Troubleshooting:
Problem: Charley Chameleon does not function correctly.
Action #1: Replace the batteries paying close attention to proper
battery polarity.
Action #2: Make sure that the connection between the external
capability switch and the jack is pushed in all the way. There should
be NO gaps.
Action #3: Try your switch with another switch operated toy/device
in an effort to rule out your switch as the source of the problems.
Care of Unit:
If you will not be using Charley Chameleon for an extended amount
of time, we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical
components. Charley Chameleon is surface washable only.
Rev 5/5/17
/5/17