Enabling Devices 2268W User guide

Enabling Devices 2268W User guide
Marble Wall Panel #2295
USER’S GUIDE
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
[email protected]
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
Multiple
Experience!
Mult
iple Sensory E
xperience!
Cool translucent glass marbles move when you pass your hands
across them. Press the marble plate to see light shining through the
marbles. Panel provides an exciting visual and tactile experience. Can
be used with our Track System (#3116) or mounted directly on a wall.
Size: 13½"L x 15¼"W x 3½"H. Requires 4 C Batteries. Weight: 5½
lbs.
1. Marble Wall Panel requires 4 C batteries (not included). Use
Alkaline batteries only (e.g. Duracell or Energizer brand). Do not
use rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform properly.
The battery compartments are located under the compartment on
the top of the panel. The cover is spring loaded to keep it closed.
To access the compartments lift up the access door and then
remove the Phillips Head screws from each battery compartment
cover. Install the C batteries into each holder. When installing new
batteries, always be careful to observe battery polarity. Replace
battery covers and screws. Never mix old and new batteries
together or different brands or types together.
Troubleshooting:
Problem: Marble Wall Panel’s lights do not work when activated.
Action #1: Make sure the ON/OFF rocker switch is turned ON.
Action #2:
#2: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Mounting Options:
Each Marble Wall Panel has 4 mounting holes for wall mounting. Please
Note: Mounting hardware is not included. You can use standard wall
anchoring hardware found at hardware stores and Home Improvement
Centers. Please consult one of their hardware associates for the proper
mounting hardware based on your wall construction. In addition we also
offer our Track System when mounting 3 or more Panels item No. 3116.
2. Turn the ON/OFF rocker switch to ON.
Care of the Unit:
3. Cool translucent glass marbles move when you pass your hands
across them. Press the marble plate to see light shining through
the marbles. Panel provides an exciting visual and tactile
experience. Once you release pressure on the marble plate the
light will go out.
The Marble Wall Panel can be wiped clean with any household multipurpose, non-abrasive cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Do not submerge the unit, as it will damage the electrical
components.
Rev 4/17/17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement