BEA U Brackets User guide
Set Screws
Aluminum Bar
Bracket
U-bracket
Rubber Bushing
Glass Door
Rubber Bushing
Steel Bushing
Installing the 10UBRACKETUL
1. Place the steel bushing and rubber bushing according to the drawing.
2. Use the 3 set screws to clamp the glass firmly.
3. Insert the aluminum bar and attach armature plate. The aluminum bar
can be adjusted so that it matches the maglock. NOTE: Do not attach
the mounting screw of the armature plate too firmly. Allow floating
movement for maximum holding force.
4. A suitable threadlock should be applied to all fixing screws.
BEA, Inc: Our Service Technicians can be called 24 hours a day, 7 days a week. For more information visit www.beasensors.com.
Canada & Texas: 1-866-836-1863; Central: 1-800-407-4545; West: 1-888-419-2564; East: 1-866-249-7937
75.5643.01 20100120
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement