Advertisement
Advertisement
Model : i9300/i9300D
Instruction Manual
Mini Audio System for your iPod®
English
TABLE OF CONTENTS
1 | iLuv
GETTING STARTED
Compatibility
General Features
Main Unit Assembly and Disassembly
Speaker Assembly and Disassembly
Wall-mounting Installation
Location of Controls (Front View of Main Unit)
Location of Controls (Rear View of Main Unit)
Antenna Connection
Speaker Connection
AC Power Connection
Location of Controls (Remote Control)
First Time Use of Remote Control
Battery Installation (Remote Control)
OPERATIONAL INSTRUCTIONS
Switching the unit ON
Operating mode selection
Adjusting the volume
Headphone Jack
Amplifier and Radio Operation
AM/FM radio operation
Manual station selection
Station search operation
Stereo / Mono
Tuner preset station
Programming AM and FM stations in memory
Changing a program position
Digital Clock and Timer
Setting the digital clock
Setting the timer
Snooze function
Setting the sleep timer
18
18
18
19
19
16
16
16
17
15
15
15
15
14
14
14
14
9
10
6
7
5
5
3
4
10
10
11
13
13
TABLE OF CONTENTS
OPERATIONAL INSTRUCTIONS - continued
Compact Disc Operation
Safety notes for operation of the CD changer
CD changer operation
Inserting and ejecting the CD
Playing the entire CD
Pause / Stop
Random play
Repeat play
Track selection
Search operation
Track intro-scan
Mute function
Program memory
MP3 Disc Operation
Inserting and ejecting an MP3 disc
Playing the entire MP3 CD
Pause / Stop
Playback in random sequence
Repeat
Title introduction
Programming memory
ID3 TAG (Artist / Title)
Basic Operation with iPod
Installing the dock adapter
Playing the iPod
Pause / Stop
Charging your iPod
CARE AND MAINTENANCE GUIDE
SPECIFICATIONS i9300 | V10M10_IM_EN_11112008
30
38
27
28
29
29
26
26
26
27
29
29
29
23
25
25
25
23
23
23
23
21
22
22
22
20
20
20
21 iLuv | 2
GETTING STARTED
COMPATIBILITY
AUDIO CD 1. Disc Size: 12cm / 8cm
2. Disc Type: CD
MP3 CD 1. File Format: MP3 (MPEG 1/2/2.5 Layer 3)
2. Bit Rate: 32Kbps ~ 320Kbps
DIGITAL 1. Compatible with most iPod models
AUDIO PLAYER with dock connector.
2. iPod is a trademark of Apple Inc.
DISC ERROR
This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There are limits, however, to the amount of correction available. In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. If you encounter this problem, try a new disc before having the unit serviced. If the CD player operates normally, the skipping problem is probably due to a defective disc.
Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played depending on the condition of the player and the disc.
3 | iLuv
MP3 (MPEG 1 Audio Layer 3)
MP3, technically referred to as MPEG 1 Audio Layer 3, is one of the popular digital audio encoding and lossy compression formats. This encoding format was developed to reduce the amount of data (or audio information) required to represent audio, yet to still reproduce audio as same as the original uncompressed audio for most listeners.
GETTING STARTED
GENERAL FEATURES
Thank you for purchasing i9300/i9300D. Unpack the unit and make sure all the accessories are put aside so they will not be lost. We recommend that you retain the original carton and packaging materials for future use, should you transport or ship the unit in the future.
· 2.1 Ch. Speaker system
· 4 MP3 CD / Audio CD playback system with integrated universal dock for your iPod
· Powerful subwoofer and 2-way speakers allow you to enjoy your favorite songs on your iPod with
depth and clarity
· Play and charge your iPod*
· Supports Random, Repeat, Intro, and Program functions
· Programmable memory for 40 audio tracks
· Provides a variety of convenient functions (Mute, Sleep, Timer and more)
· Enjoy AM / FM radio with PLL digital tuning technology
· Programmable presets for 32 radio stations (16 for AM / 16 for FM)
· Real-time clock display with sleep function
· Timer on/off function with snooze capability
· Integrated liquid crystal display (LCD) with white backlight
· Motorized CD door mechanism
· Remote control included
What’s Included
· Main unit with 2-way full range speaker and I subwoofer
· Full-function remote control
· Dock adapters
· Stand & base for desktop
· Instruction manual
* Compatible with most iPod models with dock connector.
i9300 | V10M10_IM_EN_11112008 iLuv | 4
GETTING STARTED
CAUTION This product may be used only with iLuv i9300/i9300D stand. Use with other stands may result in instability causing possible injury.
Main Unit Assembly and Disassembly
1 2 3
GETTING STARTED
Wall-mounting Installation
Secure the center unit and speakers on the wall (Solid concrete wall or wooden wall shall be use) using 8 dowels and 8 screws (supplied) as shown below:
5 | iLuv
Speaker Assembly and Disassembly
1 2 3 i9300 | V10M10_IM_EN_11112008 iLuv | 6
7 | iLuv
GETTING STARTED
Location of Controls (Front View of Main Unit)
14 13
12
11
12. TUNING – SKIP/SEARCH Button
CD backward title selection / CD backward search operation / Manual tuning of stations, station search operation
13. CD PLAY/PAUSE Button
Initiates CD operation and starts CD playback / pauses CD playback
14. INTRO Button
Plays 10 seconds of each CD/MP3 track
1
2
3
4
7
8
5
6
9
10
1. POWER Button
Used to turn the system on and off
2.
Right CD Door
3.
Display
4.
VOLUME UP/DOWN Button
5.
CD Selection Buttons
Selects a CD to play from one of the 4 players
6.
RANDOM
CD playback in random sequence
7.
TUNING + SKIP/SEARCH
Button
CD forward title selection / CD forward search operation /
Manual tuning of stations, station search operation
8.
REPEAT/PRESET Button
Press to select the repeat mode and to preset radio stations
9.
DISPLAY MODE Button
Switching to time display
(TIMER ON / OFF)
10. HEADPHONES Jack
Stereo headphone socket: accepts 3.5mm plug
11. STOP/ST. /MONO Button
Interrupts the CD playback
/ clearing the CD programme, provides stereo-mono switching for FM stations
8 | iLuv
GETTING STARTED
Location of Controls (Front View of Main Unit)
- continued
15. OPEN/CLOSE R Button
Opens and closes the right CD changer door
16.
OPEN/CLOSE L Button
Opens and closes the left CD changer door
17.
MP3 MODE Button
Selects TITLE or ALBUM
(folder) in MP3 mode
18.
TIMER Button
Activates the timer
19.
FOLDER DOWN Button
Move to the next MP3 folder in descending order
20.
Remote Sensor
Receives infrared signals from the remote control
21.
iPod PLAY/PAUSE Button
Starts iPod playback / Pauses iPod playback.
22.
MEM./CLK ADJ. Button
Supplies memory functions for tuner station presets, clock setting, and CD programming
23.
BAND Button
Selects the AM, FM, or FM/
Stereo reception bands
24.
FOLDER UP Button
Move to the next MP3 folder in ascending order
28
27
26
25
24
23
22
21
20
19
18 17 16 15
25.
MUTE Button
Temporarily switches off the audio if desired
26.
Left CD Door
27.
Dock
28.
iPod Dock Cover i9300 | V10M10_IM_EN_11112008 iLuv | 8
GETTING STARTED
Location of Controls (Rear View of Main Unit)
29
30
31
32
33
29. AC
Plug the AC power cord into this socket before plugging it into the wall outlet.
Note : When the system is connected to AC power, parts of the unit may be in operation due to its stand-by feature. In order to turn the system completely off, remove the AC power cord from the AC outlet.
30. FM ANT.
FM antenna “pigtail” wire
31.
SPEAKERS L
Terminals for the left channel speaker
9 | iLuv
32.
SUBWOOFER Output Jack
Connect an external subwoofer speaker (included)
33.
SPEAKERS R
Terminals for the right channel speaker
GETTING STARTED
Antenna Connection
You can achieve acceptable reception if you use the supplied FM pigtail antenna. If so, the antenna should be elongated and not coiled or bunched up. If it hangs freely, it can be quite effective.
Speaker Connection
Insert LEFT speaker’s striped wire into LEFT channel’s speaker block (31) by pressing the RED lever and inserting the striped wire into the open hole. Do the same with the LEFT speaker’s non-striped wire and the BLACK lever. Repeat for the RIGHT channel SPEAKER block (33) and the
RIGHT speaker’s wire.
Subwoofer Connection
This unit includes a subwoofer output jack on the rear panel labeled “SUBWOOFER OUT”. You may connect an external, powered subwoofer(included) using a single RCA-type cable as shown below.
Subwoofer
Cable (included)
AC Power Connection
Connect the power cable (included in the accessories) first to the power socket (29) at the unit and then insert the power plug into the wall outlet. When you disconnect the plug from a socket, do not pull the cable, always pull the plug.
Note : As soon as the unit has been connected to AC power, parts of the unit are in operation, due
to the standby function. To switch off the unit completely, remove the plug from the AC outlet.
Once the unit is plugged in, its time display (3) starts flashing, refer to “ Setting the digital clock ” on Page 18.
i9300 | V10M10_IM_EN_11112008 iLuv | 10
11 | iLuv
GETTING STARTED
Location of Controls (Remote Control)
39
43
OPEN/CLOSE AUX
MUTE
1
TIMER
4
TUNER/BAND
7
SLEEP
MP3 MODE
+10
MEMORY
2
5
8
3
6
9
0
RANDOM REPEAT/
PRESET
1
FOLDER
2
DISC SELECT
3 iPod
STOP
PLAY/
PAUSE
4 iPod
SNOOZE
DISPLAY
MODE
34
35
36
37
38
40
41
42
44
45
34. POWER Button
Used to turn the system on and off
35.
0 - 9, +10 NUMERIC Buttons
Recalls TUNER preset stations / Choose CD tracks
36.
REPEAT/PRESET Button
Selects among CD playback repeat functions /
Programs AM and FM radio stations
37.
RANDOM Button
Randomizes the playback of CD tracks
38.
iPod Button
Selects iPod mode
39.
iPod SKIP Button iPod forward search operation
40.
SNOOZE Button
Turns off the unit for 9 minutes, after which the unit will then resume its previous function
41.
CD PLAY/PAUSE Button
Initiates CD operation and starts CD playback /
Pauses CD playback
42.
DISPLAY MODE Button
Switching to time display (TIMER ON / OFF)
43.
VOLUME + Button
Raises the desired volume (louder)
44.
TUNING + SKIP/SEARCH Button
CD forward title selection / CD forward search operation / Manual tuning of stations, station search operation
45.
VOLUME - Button
Lowers the desired volume
GETTING STARTED
Location of Controls (Remote Control)
- continued
52
51
49
48
47
58
57
56
55
54
46
OPEN/CLOSE
MUTE
1
TIMER
4
TUNER/BAND
7
SLEEP
MP3 MODE
+10
MEMORY
2
5
8
3
6
9
0
RANDOM REPEAT/
PRESET
1
FOLDER
AUX
2
DISC SELECT
3 iPod
STOP
PLAY/
PAUSE
4 iPod
SNOOZE
DISPLAY
MODE
53
50
46.
TUNING – SKIP/SEARCH Button
CD backward title selection / CD backward search operation / Manual tuning of stations, station search operation
47. FOLDER Button
Activates the MP3 folders (in descending order)
48. STOP Button
Stops CD playback / Clears the CD program memory
49. FOLDER Button
Activates the MP3 folder (in ascending order)
50. iPod PLAY/PAUSE Button
To start iPod playback/Pauses interruption of iPod playback
51. iPod SKIP Button iPod backwards search operation
52. DISC 1 - 4 Button
Selects a CD to play from one of the 4 players
53. MEMORY Button
Supplies memory functions for tuner station presets
54. MP3 MODE Button
Selects TITLE or ALBUM (folder) in MP3 mode
55. SLEEP Button
Set the automatic switch-off time
56. TUNER/BAND Button
Activates the TUNER and selects the AM, FM, or
FM/Stereo reception bands
57. TIMER Button
Activates the timer
58. MUTE Button
Temporarily silences the audio i9300 | V10M10_IM_EN_11112008 iLuv | 12
GETTING STARTED
First Time Use of Remote Control
For the first time use, the battery is pre-installed for your convenience. Pull out the insulation tag from the button battery tray before operating the remote control as shown below.
13 | iLuv
Battery Installation
1. Remove the battery tray by pressing point (1a) inside, then sliding area (1b) at the same time
2. Pull out the battery tray
3. Install or replace the button-type battery “CR2032” (supplied)
4. Close the battery tray
1b
1a
3
2
4
WARNING Danger of explosion if battery is incorrectly replaced. Replace only with or equivalent type.
OPERATIONAL INSTRUCTIONS
Amplifier and Radio Operation
Switching the unit ON
Press the POWER button (1)/(34) to turn on the system (Confirm voltage setting before powering on. i9300D only.).
Operating mode selection
The different operating modes can be directly selected using the buttons PLAY/PAUSE (13)/(41) for CD operation and TUNER/BAND (23)/(56) for radio reception.
1. PLAY/PAUSE : Playback from the built-in compact disc player
2. TUNER/BAND : Radio, selection of the frequency bands
Adjusting the volume
To adjust the volume, press the
VOLUME UP/DOWN buttons
(4)/(43)/(45).
To turn the sound off, press the MUTE button (25)/(58).
This function is indicated when the word, MUTE appears in the display (3).
By pressing the MUTE or VOLUME UP/DOWN buttons (4)/(43)/(45) again, the sound will turn back on.
CAUTION! High volumes, especially with headphones, may damage your hearing.
Hearing experts advise not to hear music with high volume for a long period of time.
i9300 | V10M10_IM_EN_11112008 iLuv | 14
15 | iLuv
OPERATIONAL INSTRUCTIONS
Amplifier and Radio Operation
- continued
Headphones jack
The headphones PHONES jack (10) is for headphones with a 30- to 600-Ohm impedance, and equipped with a 3.5mm jack. Use an adapter (sold in electronic outlets) if your headphone has a different plug. The speakers are automatically switched off when the headphones are being used.
CAUTION Listening at high volumes for an extended period of time may cause damage to the users hearing.
AM/FM radio operation
1.
Turn the unit on by pressing
the POWER button (1)/(34).
2. Switch to the Tuner operating
mode by pressing the button
TUNER/BAND (23)/(56).
Manual station selection
1.
Press button TUNER/BAND (23)/(56) repeatedly until the desired frequency band appears.
2.
Press the buttons TUNING – or TUNING + (12)/(46) or (7)/(44) to tune to the desired radio
stations and have them indicated in the display (3).
3.
Briefly tapping the TUNING – or TUNING + button step by step alters the reception frequency
upward or downward.
Station search operation
1.
Holding down one of the two buttons TUNING – or TUNING + (12)/(46) or (7)/(44) for approx. 1 second
starts the search operation and determines the direction of the search. The search operation
simply finds stations with strong signals. Stations with weak reception can only be tuned
in manually.
2.
Hold the TUNING – or TUNING + button to start the station search again. During the search
operation, the tuner is muted.
OPERATIONAL INSTRUCTIONS
Amplifier and Radio Operation
- continued
Stereo / Mono
Repeatedly pressing the button
ST. / MONO (11) switches between stereo and mono reception.
The stereo reception of a station in the FM band is indicated on the display (3)
In the case of stereo stations with a bad (noisy) reception, we recommend switching tuner to mono reception. Press the ST. / MONO button. In the display (3), the message STEREO will disappear in mono mode.
Tuner preset station
Each time the MEM./CLK ADJ.
button (22)/(53) is pressed, the memory positions are called up one after another in ascending number order.
The memory positions are selected directly using the numerical keys 1 - 0 / +10 (35) on the remote control.
1.
Program sites 1 – 9 : Press the corresponding key 1- 9 .
2. Program sites 10 – 19 : Press button +10 and then the appropriate button 0 - 9 .
3. Program site 20 : Press button +10 twice and then the button 0 .
Programming AM and FM stations in memory
The program memory allows you store 32 stations in FM and AM range. Program place selection is described in the previous operating section.
1.
In TUNER mode, select FM or
AM reception
2. Seek out the station required by
“Manual station selection” or
“Station search operation”
3. Press the MEM./CLK ADJ.
(22)/(53)
and then press the REPEAT/PRESET
(8, front panel) or REPEAT/PRESET
(36, remote) until the desired memory preset appears.
i9300 | V10M10_IM_EN_11112008 iLuv | 16
17 | iLuv
OPERATIONAL INSTRUCTIONS
Amplifier and Radio Operation
- continued
4. Press the MEM./CLK ADJ. button
again to store the station along
with its preset. Repeat as required.
Note : You can also directly select the desired program preset by pressing numeric buttons 0~9 /
+10 (35) on the remote control. Store any remaining stations by repeating the process.
Changing a program position
If a memory position needs to be replaced by a station other than the current one, the new station can be programmed as described above, and this will automatically replace the original station.
OPERATIONAL INSTRUCTIONS
Digital Clock and Timer
Setting the digital clock
When you first plug in the unit, the display shows:
Note :
To set the clock to the current time, proceed as follows:
1.
Press MEM./CLK ADJ.
and the hour
will begin to flash.
EU Only
2.
Enter the hour by pressing the
buttons TUNING + SKIP/SEARCH
or TUNING - SKIP/SEARCH .
3.
Confirm the hour entry by pressing
MEM./CLK ADJ.
The minutes will then
begin to flash.
4.
Enter the minutes by pressing the buttons TUNING + SKIP/SEARCH or TUNING
– SKIP/SEARCH and confirm with MEM./CLK ADJ.
EU Only
To switch to the clock display while in tuner and CD modes, press DISPLAY MODE . The time is displayed for approximately 5 seconds. The time is also displayed when the unit is turned off.
Setting the timer
You can set automatic switch-on and switch-off times with the built-in timer. Before you do this, be sure the clock is set correctly.
1.
With the unit on, press DISPLAY MODE
(9)/(42), as required, until TIMER ON
appears in the display.
2.
Press MEM./CLK ADJ. (22)/(53) and
the hour will begin to flash. Use the
TUNING + SKIP/SEARCH or
TUNING - SKIP/SEARCH to set
the hour of the desired switch-on time.
EU Only i9300 | V10M10_IM_EN_11112008 iLuv | 18
19 | iLuv
OPERATIONAL INSTRUCTIONS
Digital Clock and Timer
- continued
3. To set the minutes, press the
MEM./CLK ADJ.
again and use
TUNING + SKIP/SEARCH or
TUNING – SKIP/SEARCH
to adjust. Confirm by pressing
MEM./CLK ADJ.
4.
Press DISPLAY MODE to proceed to
setting the switch-off time.
5.
Set the switch-off time using the
same procedure as switch-on
time setting.
6.
Press DISPLAY MODE , as required
to check the current time,
Timer On, and Timer Off.
7.
Press TIMER (18)/(57) to activate
the timer.
EU Only
When the unit is in standby, it will automatically switch on for the programmed length of time in the last operating mode (CD, iPod or TUNER), in which mode this unit was before switched off. Make sure the tuner is tuned to a radio station. For CD or iPod, a CD or iPod must be inserted properly.
Snooze function
When the unit is switched on by means of the timer, you can press the SNOOZE button (40) to switch the unit off for approximately 9 minutes. After this time, the unit switches on again. You can press SNOOZE again, or switch the unit off by pressing POWER .
Setting the sleep timer
When the unit is in operation it can be set to automatically switch-off 10 to 90 minutes later. Press
SLEEP button (55), as required, until the desired delay time appears on the display. The SLEEP timer can be set for: 90, 80, 70, 60, 50, 40, 30, 20, and 10 minute intervals. The unit automatically turns off after the entered time has elapsed.
i9300 | V10M10_IM_EN_11112008
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
Safety notes for operation of the CD changer
Press one of the OPEN / CLOSE buttons (15) or (16) to open the right or left CD cover (2) or (26).
The right and left CD cover do not open or close at the same time. Make sure the cover is not obstructed by any objects. This must also be ensured when closing the CD cover. The disc loader may only be opened or closed by pressing either the button OPEN / CLOSE . Take care that no foreign objects can fall into the unit when the disc compartment is open.
Under no circumstance should the laser pick up lens be touched. Never look directly at the beam.
CD changer operation
Switch the unit on by pressing the
POWER button (1)/(34). To turn on the CD mode, press the button
PLAY / PAUSE (13)/(41) or any one of the DISC 1-4 buttons (5) or (52).
If one or more CD(s) have already been inserted in the chosen location(s), playback is started.
(TOC means Table of Contents)
If there is no CD inside, the following will appear after a few seconds: iLuv | 20
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
Inserting and ejecting the CD
The CD compartment (2)/(26) is opened for inserting or removing compact discs by pressing the
OPEN / CLOSE (15) or (16) button.
1. Insert the disc with the unlabelled side facing the unit. Press the center of
the CD onto the black holder that is fitted with 3 retaining bearings.
2.
To remove the CD, hold it by the edges and lightly press on the holder to
remove it.
3.
Then close the disc compartment by pressing the OPEN / CLOSE button
(15) or (16).
After having closed the disc cover, the CD system immediately begins to scan the content of the compact disc. After that, CD will start playback automatically if disc is read properly.
Playing the entire CD
Select the desired CD with the button
CD SELECTION 1 - 4 (5) or DISC 1 - 4 (52) on the remote. Once selected, playback will begin automatically.
If playback of one CD has finished, the playback of the next inserted CD will begin, and this process will repeat itself.
Note : If the CD player is in the stop position, you can start the currently indicated CD by pressing the button PLAY / PAUSE (13)/(41). If you select a different CD by pressing the buttons
CD SELECTION 1 - 4 (5) or DISC 1 - 4 (52), playback will start automatically.
21 | iLuv i9300 | V10M10_IM_EN_11112008
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
Pause / Stop
To briefly interrupt playback, press the PLAY / PAUSE button (13)/(41).
The display indicates:
1. Press PLAY / PAUSE button again to restart play.
2.
To end the playback, press the STOP button (11)/(48).
Random play
1.
Press RANDOM before or during CD play. The tracks in the CD will be
played in random sequence.
2.
To cancel random play, press STOP , or press the RANDOM button again.
Repeat play
1.
Press REPEAT once and the track being played will replay continuously.
2. Press REPEAT twice to have the entire CD played continuously.
iLuv | 22
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
3. Press REPEAT three times to have all the inserted CDs (up to 4)
played continuously.
Track selection
Press TUNING + SKIP/SEARCH and TUNING – SKIP/SEARCH to select the desired tracks.
The tracks can be selected directly by pressing the corresponding numerical buttons 1 - 0 / +10 .
The selected number appears on the display. If the CD player is in stop mode, play starts automatically when a track is selected using the numerical buttons.
Search operation
While the CD is in play mode you can scan tracks by holding down TUNING + SKIP/SEARCH and TUNING - SKIP/SEARCH . The CD will continue to play until you find the track you want.
When you release the button the unit will resume normal play mode.
Track intro-scan
1.
Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted CDs.
2.
Press INTRO again and the selected track will play.
Mute function
If the MUTE button is pressed, the audio output will be muted, and the “MUTE” indicator will be displayed. To cancel “MUTE” press the MUTE button once more or press the VOLUME UP/DOWN button.
Program memory
The built-in program memory lets you play up to 40 tracks
(from up to 4 CDs) in the order of your choice. A track can be stored more than once within the program.
1.
Load the CDs.
2. Press MEM./CLK ADJ. (22)/(53) in the stop mode to switch to
programming mode.
23 | iLuv
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
3. Select a CD by pressing the corresponding DISC 1 - 4 button.
4.
Select the desired track using the numerical buttons 0 - 9 / +10 on
the remote control or by repeatedly pressing TUNING + SKIP/SEARCH
and TUNING + SKIP/SEARCH .
5. Press MEM./CLK ADJ.
to save the track in the first program location.
For example, if you selected CD 1, track number 14, it will appear in
Program position 1 as shown below.
6. For the next program position, reselect this or another CD and select a track.
7.
Confirm the selection using the MEM./CLK ADJ.
button.
8.
To program other tracks in the memory, repeat steps 3 - 7.
9.
To play the program, press PLAY/PAUSE . The program can be played back again as long as
MEMORY appears on the display.
To clear the programming and resume normal playback
The programming is erased by pressing STOP until the MEMORY display disappears, or by opening the CD changer door. If the unit is switched off, the program is not erased.
Note :
1.
RANDOM will not function in programmed play.
2.
This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s).
If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the
next folder until it finds one containing an MP3 file(s).
i9300 | V10M10_IM_EN_11112008 iLuv | 24
OPERATIONAL INSTRUCTIONS
MP3 Disc Operation
Inserting and ejecting an MP3 disc
The CD compartments (2)/(26) are opened for inserting or removing compact discs by pressing the
OPEN / CLOSE (15)/(16) buttons.
1. Insert the MP3 disc with the unlabelled side facing the unit. Press the center
of the CD onto the black holder fitted with 3 retaining bearings.
2.
To remove the CD, hold it by the edges and remove it by gently pressing
on the black holder.
3.
Then close the disc compartment by pressing the OPEN/CLOSE button
(15) or (16).
After having closed the disc cover, the CD system begins immediately to scan the content of compact disc inserted. After that, CD will be start playback automatically if read disc properly.
Playing the entire MP3 CD
1.
Select the desired CD with the button CD SELECTION 1 - 4 (5) or
DISC 1 - 4 (52) on the remote. Playback begins automatically.
2.
To stop the disc playing, press the STOP button (11)/(48).
3. Press the FOLDER or button (24)/ (19)
or (49)/(47) to select desired MP3 album.
25 | iLuv
OPERATIONAL INSTRUCTIONS
MP3 Disc Operation
- continued
4. Press the PLAY/PAUSE button to play the MP3 disc.
Pause / Stop
1.
To briefly pause playback, press the PLAY/PAUSE button (13)/(41)
Display indicates:
2.
Press PLAY/PAUSE button again to restart play.
3.
To end the playback, press the STOP button (11)/(48).
Playback in random sequence
Press the RANDOM button (6)/(37) in stop condition to start random play.
By pressing button STOP (11)/(48), the random playback is cancelled.
This function can be switched off by pressing the RANDOM button again.
Repeat
1.
Press the REPEAT button during MP3 playback to have the title currently
being played repeat continuously.
i9300 | V10M10_IM_EN_11112008 iLuv | 26
27 | iLuv
OPERATIONAL INSTRUCTIONS
MP3 Disc Operation
- continued
2. Press the REPEAT button again to have the entire MP3 disc
played continuously.
3. Press the REPEAT button a third time to have all the inserted MP3 discs
played continuously.
Title introduction
1.
Press the INTRO button (14) during stop mode to playback the first 10 seconds of each title.
2.
Press the INTRO button again and the CD player plays will play the currently selected track.
Programming memory
The built-in program memory enables up to 40 titles to be played from up to 4 CDs in the order of your choice. Any title can be stored more than once within one program.
1.
Insert a CD in its compartment.
2.
By pressing the button MEM./CLK ADJ.
(22)/(53) in the stop mode you
can switch to the programming mode.
OPERATIONAL INSTRUCTIONS
MP3 Disc Operation
- continued
3. Select the desired title using the numeric buttons 0 - 9 / +10 (35) on the remote
control device or by repeatedly pressing TUNING + or TUNING – .
4. Press the MEM./CLK ADJ. (20)/(53) to save the title on the first program
location. In display unit (3) appears:
5. Confirm selection using the MEM./CLK ADJ.
button (22)/(53).
6.
To store the remaining titles in the memory, repeat Steps 3-5.
To play back the program, press the PLAY/PAUSE button (13)/(41). When PLAY/PAUSE is pressed, the program can be played back again as long as MEMORY appears on the display unit (3).
To Clear the Program (Resume Normal Playback)
The programming is erased by pressing the STOP button (11)/(48) in the programming mode
(until the MEMORY display disappears), or by opening the disc compartment.
Note : RANDOM button is not used for programming.
ID3 TAG (Artist/Title)
1.
When an MP3 disc is playing, press the MP3 MODE button repeatedly. The track no., title and
artist information will be shown in the display if disc information is available.
2.
To resume normal play display, press the MP3 MODE button repeatedly until playing
time reappears.
i9300 | V10M10_IM_EN_11112008 iLuv | 28
OPERATIONAL INSTRUCTIONS
Basic Operation with iPod
Installing the dock adapter
Before docking your iPod on i9300/i9300D, a dock adapter must be properly installed. Please make sure you are using a correct dock adapter for your iPod and that it is properly inserted into the universal wall of i9300/i9300D. Failure to do so may damage your iPod.
Install iPod
Playing the iPod
1.
Insert the already playing iPod in the universal dock.
2.
Press the iPod PLAY/PAUSE button. The display will show “Detect iPod State” and an “iPod” icon. At the same time, i9300/i9300D will automatically turn on, and you will hear the music playing from your iPod.
3.
Press the iPod SKIP or button (51) or (39) to select desired track.
Pause / stop
To briefly interrupt playback, press the iPod PLAY/PAUSE button (21)/(50). The display will show “ PLAY/PAUSE SET ” for a second then back to normal mode.
1.
Press iPod PLAY / PAUSE button again to restart play.
2.
To end the iPod playback, select CD or TUNER mode, or press the POWER button to off.
Charging your iPod
To charge your iPod, insert your iPod into the built-in universal dock. Ensure that i9300/i9300D is connected to an outlet.
29 | iLuv
CARE AND MAINTENANCE GUIDE
· Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with
the shiny, unprinted side of the disc
· Do not attach adhesive tape, stickers etc., to the disc label
· Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD cleaning kit
· If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched)
· When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
Never wipe in circular motions.
· To remove a disc from its storage case, press down on the centre of the case and lift the disc outs,
holding it carefully by the edges
· Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.
Unlike conventional records. compact disc have no groove to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles.
CLEANING THE UNIT
· To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning
· The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use
caution when cleaning and wiping the plastic parts
· If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinets
· If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as
these will damage the finish of your unit
CAUTION never allow any water or other liquids to get inside the unit while cleaning. i9300 | V10M10_IM_EN_11112008 iLuv | 30
USER SAFETY GUIDE
WARNING
· TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
· THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO
OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with the arrowhead symbol, within an equilateral triangle is entended to alert the use to the presence of uninsulated “dengerous voltage” within the product’s enclosure that may be of significant magnitude to constitute a risk of electric shock to people.
The exclamation point within an equilateral triangle is entended to alert the user to the presence of important operating and maintenance (serviving) instructions in th eliterature accompanyinig the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instrtuctions
5. Do not use this apparatus near water
6. Clean only with dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
31 | iLuv
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS
- continued
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Grounding or Polarization – This product may be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternate Warnings – This product is equipped with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
16. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
i9300 | V10M10_IM_EN_11112008 iLuv | 32
33 | iLuv
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS
- continued
CLEANING
Always disconnect unit from power supply before attempting to clean it. Use soft clothmoistened with soapy water, and wipe gently. Do not use solvents or abrasive materials.
LASER SAFETY
This unit uses laser technology. Only a qualified professional should remove the cover or attempt to service this device, due to possible eye injury.
CAUTION – CLASS 1 LASER PRODUCT
Use of controls adjustments and/or performance of procedure other than specified herein may result in hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION: HAZAROUS LASER RADIATION WHEN OPEN AND
INTERLOCK DEFEATED.
YOU CAN HELP TO PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center.
FOR USED BATTERIES
Disposed of the used batteries properly. Please follow the local regulations for the battery disposal.
i9300 | V10M10_IM_EN_11112008
USER SAFETY GUIDE
FCC NOTICE TO A USER IN USA
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
· Consult the dealer or an experienced radio / TV technician for help.
FCC RULES
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
Note: Do not make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
iLuv | 34
35 | iLuv
USER SAFETY GUIDE
FCC NOTICE TO A USER IN USA
- continued
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us, so please take care when operating this equipment. We strongly recommend you to follow the guideline below in order to prevent possible damage or loss of hearing.
If you continuously listen to the loud sounds, your hearing will adapt to continuous loud sounds and will give you the impression that the volume has been reduced. What seems normal to you may in fact be harmful. To guard against this BEFORE YOUR
HEARING ADAPTS, set the volume at a low level and slowly increase the volume level until you can hear comfortably and clearly without distortion. Damage to your hearing is accumulative and is irreversible. Any ringing or discomfort in the ears indicates that the volume is too loud. Once you have established a comfortable listening level, DO
NOT INCREASE THE VOLUME LEVEL FURTHER.
In the use of headphones, please take more attention. Hearing experts say that listening to a loud music can damage your hearing, especially when listening to music with headphones.
USER SAFETY GUIDE
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners nearby, switch this unit off when not in use or move it away from the affected radio/television tuner.
NOTE : This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television operation
(which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
· Consult the dealer or an experienced radio / TV technician for help.
WARNING!
• The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
• Mains plug is used as the disconnect device. It shall remain readily operable and
should not be obstructed during intended use. To be completely disconnected, the
apparatus from supply mains, the mains plug of the apparatus shall be disconnected
from the mains socket outlet completely.
i9300 | V10M10_IM_EN_11112008 iLuv | 36
37 | iLuv
USER SAFETY GUIDE
ADDITIONAL IMPORTANT INSTRUCTIONS
· Place the apparatus with some distances from the nearby objects or walls for sufficient
ventilations. The ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
· No naked flame sources such as lighted candles should be placed on the apparatus.
· Dispose of used batteries properly. Follow the local regulation for the battery disposal.
· Use this apparatus in the moderate climates. It is recommended not to use this apparatus such in
a lighting storm.
SPECIFICATIONS
· GENERAL
1. Power requirement
a. Main unit:
i. AC: 120V, 60Hz (US)
220~230V, 50Hz (EU)
110V / 220V, 50Hz / 60Hz (i9300D)
ii. DC: 1 x CR2032 for Remote Control
b. Subwoofer: AC 100-240V, 50/60Hz
2. Power consumption:
a. Main unit: 35 Watts
b. Subwoofer: 70 Watts
3. Unit Dimension (w/ stand)
a. Unit: 440 (W) x 110 (D) x 428 (H) mm (17.3” x 4.5” x 16.9”)
b. Speakers: 148 (W) x 108 (D) x 415 (H) mm (5.8” x 4.3” x 16.3”)
c. Subwoofer: 170 (W) x 240 (D) x 260 (H) mm (6.7” x 9.5” x 10.2”)
· RECEIVER SECTION
1. Receiving bands: AM/FM
2. Tuning range
a. AM 520-1710kHz ; 522-1620kHz (EU only)
b. FM 87.5 - 108MHz
· CD PLAYER SECTION
1. Playback system: 4 CD front loading changer
2. Frequency response: 60 - 18,000 Hz
· AUDIO SECTION
1. Power output:
a. Satellite speaker: 10 Watts (RMS) per channel
b. Subwoofer: 30 Watts RMS
2. Speaker impedance:
a. Satellite: 3 ohms
b. Subwoofer: 8 ohms
3. Headphone impedance: 8 - 32 ohms i9300 | V10M10_IM_EN_11112008 iLuv | 38
THANK YOU FOR YOUR PURCHASE
Visit our website at www.i-Luv.com
© 2009 www.i-Luv.com
iLuv is a registered trademark of jWIN Electronics Corp. iPod is a trademark of Apple Inc. registered in the US and other countries. All logos and brands are the property of their respective owners. iPod is not included in this package. The specifications and product images or graphics may slightly differ from the actual product. Features and specifications are subject to change without prior notification.
© 2009 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape and graphics, may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including photocopying, recording or use of an information storage and retrieval system. Any unauthorized distribution or reproduction of this printed material or product, or any portion there of, will be prosecuted to the fullest possible extent of the law.
Printed in China
Advertisement
