advertisement
MX-Series
Coaxial Speakers
Models: MX65CX - MX57CX - MX69CX
FEATURES
Shallow Mount - Allows for easy installation behind factory panels
Dual Concentric Design - Provides excellent off axis response as the woofer and tweeter share a common center thus focusing the sound of both drivers in a uniform field of sound resulting in premium sound quality from stock locations
Polypropylene Carbon Impregnated Cone - Strong yet lightweight material for crisp, accurate mid and low notes
High Temperature Voice Coil - Our proprietary Torriform Technology provides superior current distribution while effectively dissipating heat
Phoeniroll Surround Technology - A Phoenix Gold Standard that supports smooth linear movement for optimal accuracy
Silk Dome Tweeter - delivers rich, warm treble with remarkable clarity and definition
Corona Lens - Our unique wave guide technology, focuses the tweeter correcting any phase cancellation that occurs in traditional “point source” speakers. The lens provides a smooth blend of the tweeter frequencies with mid woofer by dispersing the sound waves in a balanced fashion
CONTENTS
2 x MX Series Coaxial Speakers
2 x Speaker Grilles (MX65CX and MX69CX)
8 x Mounting Screws
8 x Mounting Clips
1 x User / Installation Manual
1 x Mounting Template
CAUTION!
Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the voice coil and void the speaker warranty.
MOUNTING GUIDELINES
1. Ensure there is adequate clearance and depth for the speaker to be mounted.
2. Use the supplied template to mark & cut out the correct diameter hole.
3. Drill four holes for the mounting screws.
4. Separate the grille from the grille frame.
5. Insert the speaker into the grille frame and affix with the screws provided.
6. Complete installation by replacing the grille into the grille frame.
MX Series Coaxial Speakers
MX65CX - MX57CX - MX69CX
WIRING GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber grommets when wiring through metal panels.
Ensure all terminals and connections are protected from the vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.
When connecting the speakers to the source unit or amplifiers ensure you connect the positive and negative output wire from the source unit to the corresponding speaker terminals. This will ensure the audio system will be in phase.
SPECIFICATION
PEAK Power
RMS Power
Frequency Response
Impedance
Sensitivity
Cone Material
Tweeter Material
Tweeter Size
FS
Vas
Xmax
Qts
Overall Diameter A
Cutout Diameter B
Mounting Depth C
MX65CX
150 Watts
100 Watts
59Hz-20KHz
4 Ohm
90dB
Polypropylene/Carbon
Silk
25mm
67hz
11.8cuL
10mm
0.419
7.08in
180mm
5.67in
144mm
2.28in / 58mm
MX57CX
150 Watts
100 Watts
67Hz-20KHz
4 Ohm
92dB
Polypropylene/Carbon
Silk
19mm
67hz
10.9cuL
10mm
1.278
5.51in x 8.66in
140mm x 220mm
4.96in x 7.16in
126mm x 182mm
2.20in / 56mm
MX69CX
150 Watts
100 Watts
55Hz-20KHz
4 Ohm
88 dB
Polypropylene/Carbon
Silk
25mm
55hz
19.59cuL
11mm
0.592
7.25in x 10.18in
184mm x 258mm
6.02in x 8.78in
153mm x 223mm
2.95in / 75mm
WARNING:
Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. Please watch for emergency vehicles as warning signals may not be heard.
MX65CX
A
7.08in/180mm
MX57CX
A
8.66in/220mm
MX69CX
A
10.18in/258mm
B
5.67in/144mm
B
7.16in/182mm
B
8.78in/223mm
A = Overall Diameter
B = Cutout Diameter
C = Mounting Depth
B
4.96in/126mm
B
6.02in/153mm
Phoenix Gold Product Warranty
LIMITED WARRANTY
Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s
Authorized Phoenix Gold reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact that country’s reseller for information.
Phoenix Gold is a Power Brand of AAMP Global tel - 1-800-477-2267 email - [email protected] (USA) email - [email protected] (Europe)
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
Woolmer Way, Bordon, Hampshire,
GU35 9QE, United Kingdom
© 2019 AAMP Global
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project