Digimerge ACCDPS262B 16+1 Port High-Speed PoE Gigabit Switch Quick Start Guide

Digimerge ACCDPS262B 16+1 Port High-Speed PoE Gigabit Switch Quick Start Guide
16+1 PoE+ Camera Switch
1
Quick Start Guide
2
Network Cameras*
Router / LAN*
Up to 300ft / 91m
Front Panel
SFP port
Back Panel
100-240V AC
* Not included / sold separately
3
Power
Remove dust cap
to use
NOTE: Use RJ45
or SFP to connect
to port 17. You
may not use both
simultaneously.
ACCDPS262B_QSG_EN_R1
16+1 PoE+ Camera Switch
Quick Start Guide
Technical Specifications
LED Indicators
System
MEANING
NAME
SPECIFICATION
Ports
16× 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
1× 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X port
1× 1000Base-X SFP interfaces, shared with port 17
PoE Standard
IEEE 802.3af / 802.3at PoE
PoE Power Output
Per Port 51V DC, Max. 30.8W
Total Power Ouput
220W across ports 1~16 (at 104°F / 40°C)
200W across ports 1~16 (at 122°F / 50°C)
Standard Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
NAME
COLOR
MEANING
PWR
Green
ON: The switch is receiving power.
OFF: The switch is not receiving power.
NAME
COLOR
MEANING
Operating Humidity
5 ~ 95% (non-condensing)
LNK/ACT
Green
ON: Successfully established link at 10/100Mbps.
FLASHING: Switch is sending/receiving data.
OFF: No connection.
Operating Temperature
32° ~ 122°F / 0° ~ 50°C
Power Input
100~240V AC, 50/60Hz, 3.5A
Dimensions
(W×D×H)
17.4 × 8.2 × 1.7”
441 × 208 × 44mm
1U height
Weight
5.9lbs / 2.7kg
Port 1 ~ 16
PoE In-Use
Orange
ON: Port is providing 51V DC in-line power.
OFF: Connected device is not a PoE Powered Device (PD).
Port 17 (RJ-45)
NAME
COLOR
MEANING
LNK/ACT
Green
ON: Successfully established link at 10/100/1000Mbps.
FLASHING: Switch is sending/receiving data.
OFF: No connection.
Port 17 (SFP)
NAME
COLOR
MEANING
LNK/ACT
Green
ON: Successfully established link at 1000Mbps
FLASHING: Switch is sending/receiving data.
OFF: No connection.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
ACCDPS262B_QSG_EN_R1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement