Digimerge ACCDPS282B 8+1 Port High-Speed PoE+ Switch Quick Start Guide

Digimerge ACCDPS282B 8+1 Port High-Speed PoE+ Switch Quick Start Guide
8+1 High-Power PoE Switch
1
Quick Start Guide
2
IP Cameras*
Router/LAN*
Up to 300ft / 91m
Front Panel
Back Panel
*Not included/sold separately
3
Power
ACCDPS282B_QSG_EN_R1
8+1 High-Power PoE Switch
Quick Start Guide
Technical Specifications
Name
Ports
PoE Standard
LED Indicators
System
Name
PWR
Color
Green
Meaning
ON: The switch is receiving power.
OFF: The switch is not powered.
Port 1 to Port 8
Name
Color
Meaning
LNK/ACT
Green
ON: Successfully established link at 10/100Mbps at full
duplex mode.
Slow Flashing: Successfully established link at
10/100Mbps at half duplex mode.
Fast Flashing: Switch is sending/receiving data over
that port.
OFF: No connection.
ON: Port is providing 56V DC in-line power.
OFF: Connected device is not a PoE Powered Device (PD).
POE
Orange
Port 9
Name
Color
Meaning
LNK/ACT
Green
Speed
Green
ON: Successfully established link.
Flashing: Switch is sending/receiving data.
OFF: No connection.
ON: Port is established at 1000Mbps.
Slow Flashing: Port is established at 100Mbps.
OFF: Port is established at 10Mbps.
PoE Power Output
Total Power Ouput
PoE Class
Standard Compliance
Operating Humidity
Operating Temperature
Power Input
Dimensions
(W x D x H)
Weight
Specification
8x 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
1x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
IEEE 802.3af / 802.3at PoE / PSE
Per Port 56V DC, Max. 30 watts
120 watts across ports 1~8
Class 0/1/2/3/4
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
5 ~ 95% (non-condensing)
32 ~ 122F / 0 ~ 50C
100~240V AC, 50/60Hz, 2.5A max.
11” x 7.1” x 1.7”
280 x 180 x 43mm (W x D x H)
1U height
1.7kg / 3.75lbs.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the Instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
ACCDPS282B_QSG_EN_R1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement