Caso Design Fomini Crema Inox 6.8 oz. Stainless Steel Electric Milk Frother installation Guide
The Caso 11662 lets you prepare hot or cold milk foam and warm milk for a variety of coffee drinks. It features two whisks for different milk foam consistencies and an illuminated on/off switch with a 360° base for easy handling. The heat-resistant glass jug with a spout is removable, making it easy to pour and clean.
Advertisement
Advertisement
Original
Operating Manual
Milkfrother
Fomini Crema Inox (11662)
USA Branch
CASO Design USA LLC
50 Mountain View Rd
Warren, NJ, 07059
www.CasoDesignUSA.com
T.: 908.604.0677
Document-Number: 11662 13-08-2018
Printing and typographical errors reserved.
© 2018 CASO Design USA LLC
Fomini Crema Inox
2
1 Operating Manual ................................................................... 5
1.1
General ................................................................................................................... 5
1.2
Information on this manual ................................................................................. 5
1.3
Warning notices .................................................................................................... 5
1.4
Limitation of liability ............................................................................................. 6
1.5
Copyright protection ............................................................................................ 6
2 Safety........................................................................................ 6
2.1
Intended use .......................................................................................................... 7
2.2
General Safety information ................................................................................. 7
2.3
Danger of fire......................................................................................................... 8
2.4
Danger of burns .................................................................................................... 8
2.5
Dangers due to electrical power ......................................................................... 9
3 Commissioning ....................................................................... 9
3.1
Safety information ................................................................................................ 9
3.2
Delivery scope and transport inspection .......................................................... 9
3.3
Unpacking ............................................................................................................ 10
3.4
Disposal of the packaging ................................................................................. 10
3.5
Setup location requirements: ........................................................................... 10
3.6
Electrical connection ......................................................................................... 11
4 Function ................................................................................. 11
4.1
Overview: ............................................................................................................. 11
4.2
Rating plate ......................................................................................................... 12
5 Operation and Handing ........................................................ 12
5.1
Before the first use ............................................................................................. 12
5.2
Operation ............................................................................................................. 12
6 Hints and Tips ....................................................................... 13
7 Serving suggestions ............................................................ 14
8 Cleaning and Maintenance .................................................. 14
8.1
Safety information .............................................................................................. 14
8.2
Cleaning ............................................................................................................... 14
9 Troubleshooting ................................................................... 15
9.1
Security advices ................................................................................................. 15
9.2
Troubleshooting ................................................................................................. 15
10 Disposal of the Old Device ................................................ 15
Fomini Crema Inox 3
11 Guarantee ............................................................................. 16
12 Technical Data ..................................................................... 17
Fomini Crema Inox 4
1
Operating Manual
1.1 General
Please read the information contained herein so that you can become familiar with your device quickly and take advantage of the full scope of its functions.
Your Fomini Crema / Fomini Crema Inox will serve you for many years if you handle it and care for it properly.
We wish you a lot of pleasure in using it!
1.2 Information on this manual
These Operating Instructions are a component of the Fomini Crema / Fomini Crema Inox
(referred to hereafter as the device) and provide you with important information for the initial commissioning, safety, intended use and care of the device.
The Operating Instructions must be available at all times at the device. This Operating Manual must be read and applied by every person who is instructed to work with the device:
Commissioning
Operation
Troubleshooting and/or
Cleaning
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with the device.
1.3 Warning notices
The following warning notices are used in the Operating Manual concerned here.
Danger
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
► Observe the instructions in this warning notice in order to avoid the danger of death or serious personal injuries.
Warning
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Fomini Crema Inox
5
Attention
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Please note
A notice of this kind indicates additional information, which will simplify the handling of the machine.
1.4 Limitation of liability
All the technical information, data and notices with regard to the installation, operation and care are completely up-to-date at the time of printing and are compiled to the best of our knowledge and belief, taking our past experience and findings into consideration.
No claims can be derived from the information provided, the illustrations or descriptions in this manual.
The manufacturer does not assume any liability for damages arising as a result of the following:
Non-observance of the manual
Uses for non-intended purposes
Improper repairs
Technical alterations, modifications of the device
Use of unauthorized spare parts
Modifications of the device are not recommended and are not covered by the guarantee.
All translations are carried out to the best of our knowledge. We do not assume any liability for translation errors, not even if the translation was carried out by us or on our instructions. The original German text remains solely binding.
1.5 Copyright protection
This document is copyright protected.
CASO Design USA LLC. reserves all the rights, including those for photomechanical reproduction, duplication and distribution using special processes (e.g. data processing, data carriers, data networks), even partially.
Subject to content and technical changes.
2 Safety
This chapter provides you with important safety notices when handling the device.
The device corresponds with the required safety regulations. Improper use can result in personal or property damages.
Fomini Crema Inox 6
2.1 Intended use
This device is only intended for use in households in enclosed spaces for making milk foam and heating milk
Uses for a different purpose or for a purpose which exceeds this description are considered incompatible with the intended or designated use.
Warning
Danger due to unintended use!
Dangers can emanate from the device if it is used for an unintended use and/or a different kind of use.
► Use the device exclusively for its intended use.
► Observe the procedural methods described in this Operating Manual.
Claims of all kinds due to damages resulting from unintended uses are excluded.
The User bears the sole risk.
2.2 General Safety information
Please note
Please observe the following general safety notices with regard to the safe handling of the device.
► Read all these instructions before using the appliance.
► Examine the device for any visible external damages prior to using it. Never put a damaged device into operation.
► Do not place the device on a polished wood suface, it could damage the wood.
► Unplug your appliance as soon as you stop using it or to clean it.
► Unplug the device when you change the accessories (whisk 1 or 2).
► Allow the device to cool down before cleaning the device or changing the accessories.
► Children shall not play with the appliance.
► Cleaning and user maintenance shall not be made by children.
► Close supervision is necessary when any appliance is used near children.
► Do not use or store the appliance outdoors.
► Do not operate without milk in the jug.
► Never touch rotating parts, risk of injury!
► By exceeding the filling capacity he jug may overflow.
► The device should be used only in conjunction with the basis provided.
Fomini Crema Inox 7
Please note
► Never operate appliance on uneven surfaces.
► Do not insert any objects and/or fingers in the appliance apertures.
► Only qualified electricians, who have been trained by the manufacturer, may carry out any repairs that may be needed. Improperly performed repairs can cause considerable dangers for the user.
► Only customer service departments authorized by the manufacturer may carry out repairs on the device during the guarantee period, as otherwise the guarantee entitlements will be null and void in the event of any subsequent damages.
► Defective components must always be replaced with original replacement parts. Only such parts will guarantee that the safety requirements are fulfilled.
► Device is not intended to be operated by means of an external timer or separate remotecontrol system.
► For your own safety, only use manufacturer accessories and spare parts suited to your machine.
2.3 Danger of fire
Warning
There is a danger of fire due to the event the device is not used properly.
Observe the following safety notices to avoid dangers of fire:
► Do not set up the device near flammable material.
► Keep this appliance away from sources of heat (gas, electric, burner, heated oven).
2.4 Danger of burns
Danger
The heated milk in the milk frother and the interior of the jug can get very hot.
Observe the following safety instructions and be careful not to burn or scald yourself or others:
► When the milk is heated, the interior of the jug gets very hot!
► Always check the temperature of the milk, before drinking it.
► When you are heating the milk, keep the lid closed.
► Do not touch hot surfaces.
► Do not touch the metal parts, or the housing of the device when the device is in use, as this may cause burning or scalding.
► Do not remove the lid during operation, as this could cause scalding.
Fomini Crema Inox 8
2.5 Dangers due to electrical power
Danger
Mortal danger due to electrical power!
Mortal danger exists when coming into contact with live wires or subassemblies!
Observe the following safety notices to avoid dangers due to electrical power:
► Do not operate this device if its power cable or plug is damaged, if it does not work properly or if it is damaged or has been dropped. If the power cable is damaged, it will need to be replaced by the manufacturer or his service agency or a similar qualified person, to avoid any dangers.
► If the connection lead is damaged, you will need to have a special connection lead installed by an authorized electrician.
► Do not open the housing on the device under any circumstances. There is a danger of an electrical shock if live connections are touched and the electrical or mechanical structure is altered. In addition, functional faults on the device can also occur.
► Do not put the machine, power cord or plug in water or any other liquid.
► Do not touch the appliance or the mains plug with wet hands.
► Do not leave the power cord hanging within children's reach.
► The power cord must never be near or in contact with the hot parts of the machine, near a source of heat or over a sharp edge.
► Do not let the power cord come into contact with oils.
3 Commissioning
This chapter provides you with important safety notices during the initial commissioning of the device. Observe the following notices to avoid dangers and damages:
3.1 Safety information
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.
3.2 Delivery scope and transport inspection
As a rule, the Fomini Crema / Fomini Crema Inox is delivered with the following components:
Fomini Crema / Fomini Crema Inox
Lid
Power base with cord
Whisk for heating
Whisk for frothing
Operating Instructions
Fomini Crema Inox 9
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete shipment or damages as a result of inadequate packaging or due to transportation.
3.3 Unpacking
Unpack your device as follows:
Take out the device from the box and remove the interior and exterior packaging.
You can find the whisk for frothing in the lid and the whisk for heating on the attachment for the whisks in the jug.
Clean the appliance thoroughly before the first use. (see chapter Cleaning and maintenance)
3.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging materials are selected in accordance with environmentally compatible and recycling-related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the quantities of accumulated waste. Take any packaging materials that are no longer required to
“Green Dot” recycling collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee period of the device, in order that the device can be re-packaged properly in the event of a guarantee claim.
3.5 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location must fulfil the following prerequisites:
The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing capacity.
Choose the setup location in such a way that children cannot reach the device.
The device is not intended to be installed in a wall or a built-in cupboard.
Do not set up the device in a hot, wet or extremely damp environment or near flammable material.
The electrical socket must be easily accessible so that the power lead can be disconnected easily, in the case of an emergency.
The installation and assembly of this device in non-stationary setup locations (e.g. on ships) must be carried out by specialist companies / electricians, provided they guarantee the prerequisites for the safe use of this device.
Fomini Crema Inox 10
3.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage and frequency) on the rating plate with those of your electrical network. This data must agree in order that no damages occur in the device
If in doubt, ask your qualified electrician.
The electrical outlet must be protected by a 16A safety cut-out switch.
Do not use extension cables. The use of multiple plugs or gangs is prohibited because of the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been installed under the milk frother or over hot or sharp surfaces.
The electrical safety of the device is only guaranteed if the device is connected to a properly installed protective conductor system. Operations using an electrical outlet without a protective conductor are prohibited. If in doubt, have the house installation checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a missing or damaged protective conductor.
4 Function
In this chapter, you'll find important information on the function of the device.
4.1 Overview:
1 transparent lid
2 silicon ring
3 marks for different functions
4 jug
5 button for warm milk froth and heating milk
6 button for cold milk froth
7 power base with cord
8 attachment for the whisks
9 whisk for frothing milk
10 whisk for heating milk
Fomini Crema Inox 11
4.2 Rating plate
The rating plate with the connection and performance data can be founded beneath the device.
5
Operation and Handing
This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene quickly in the event of dangers.
5.1 Before the first use
Before using the appliance for the first time please clean the jug and the accessories, as described under the chapter cleaning and maintenance to remove dust or production residues.
5.2 Operation
With the Fomini Crema / Fomini Crema Inox you can heat cold as well as warm milk froth.
The appliance has got three markings for the filling:
MIN : Fill milk at least up to that marking
MAX (bottom) Fill milk up to that maximum marking to make milk froth.
MAX (top): When you want to heat milk but not froth it, you can fill milk up to that maximum marking.
Please note
► Please note the maximum markings. Please use for milk froth only the bottom MAXmarking. Otherwise so much foam will be made that the lid would lift and milk would overflow.
You can make warm as well as cold milk froth.
Settings:
Whisks Functions Max capacities Completion Time
Frothing cold milk 4 fl oz 60s
Frothing & Heating 4 fl oz 65-80s
Heating
(with a small amount of froth)
8 fl oz 110s-130s
Fomini Crema Inox 12
Scheme of buttons
Button Function
Warm milkfroth and heating milk.
Cold milkfroth.
The operation can be canceled with both buttons.
Handling
1. Choose the appropriate whisk and set it inside the jug on the attachment for the whisk.
(See the functions above for reference.)
2. Pour the milk into the jug below the mark.(See the max capacities above for reference)
3. Push the appropriate button to start the machine: a) Frothing & Heating / Heating: The indicator light will on after pushing the upper button.
After finishes working, the indicator light keeps flashing for 30 seconds. b) Frothing the cold milk: Pour the cold milk into the jug and push the under button then the indicator light on. After 60s the machine finishes working, the indicator light off and keeps flashing for 30 seconds.
Please note
► Please pour out the milk and the milk froth. By using a metal spoon or another object with sharp edges you risk damaging the coating of the pot.
► Only fill milk into the appliance.
6
Hints and Tips
Always use your frother first to froth or heat your milk. While it is operating prepare your coffee or hot chocolate and serve immediately.
Use milk with fat content ≥ 2 % for best results.
Cold milk can be frothed with this frother. But it doesn’t mean you can cool down the milk with it. The frother works in normal temperature in this condition.
Milk heats to approximately 150 °F +/-40°F. This is the ideal temperature to ensure the flavor of your coffee is not impaired and so you don’t have to wait too long until you can start sipping on your drink.
Keep the whisks in a safe place. They are small and can easily be lost.
After frothing or heating allow 2 minutes for the thermostat to reset and the frother to be ready for use again. To shorten this time, rinse with water and wipe dry after each use.
The frother is designed to heat and froth milk. If you add flavorings, coffee granules or chocolate powder into the frother, ensure it is cleaned immediately and thoroughly after using.
Fomini Crema Inox 13
7 Serving suggestions
Here is a selection of quick and easy drinks you can make using the frother.
With frothed milk
Cappuccino
1/3 espresso
Add 2/3 frothed milk
Top with cocoa powder.
Latte Macchiato
Pour frothed milk in a tall glass
Add espresso carefully along rim of the glass.
Instant frothy coffee
Make instant coffee
Add frothed milk.
With hot milk
Caffè Latte
1/3 espresso shot
Add 2/3 heated milk and stir.
Hot Chocolate
Pour heated milk in to a large mug
Add chocolate powder and stir to mix.
Instant milky coffee
Place instant coffee granules in a cup
Add hot milk and stir to mix.
8
Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining the device. Please observe the notices to prevent damages due to cleaning the device incorrectly and to ensure trouble-free operation.
8.1 Safety information
Attention
Please observe the safety instructions, before cleaning your milk frother.
► Before cleaning switch off the unit and take the power plug out of the outlet.
► Clean the unit with a soft cloth.
► Don't clean the milk frother with inflammable detergents.
► Clean the milk frother again thoroughly when the machine hasn't been used for a long time.
8.2 Cleaning
Remove the jug from the power base before cleaning. Separate the lid and the silicon ring from the jug. Never immerse the jug or the base into water .
Never use sharp cleaning agents, hard nylon brush or metal brush to avoid scratches on the stainless steel surface! Never clean with metal objects and never use abrasives.
THE JUG : Clean immediately after each use. Flush and clean the inner walls with using warm soapy water and a non-abrasive cloth. Then wipe dry with a soft cloth.
Fomini Crema Inox 14
Please note
► For better cleaning you can fill water with a splash of rinsing agent until the min-marking and use the device with the function for warm milkfroth. After that clean the jug with clear water and dry it.
THE LID: Separate the lid with the silicon ring from the jug. Wash it out with water directly.
THE WHISKS: Remove from the jug and wash with warm water. Dry and store in a safe place.
Do not use the dishwasher.
Jug, lid, whisks and the basis with cable are not suitable for dish washer.
9
Troubleshooting
This chapter provides you with important notices with regard to operating the device. Observe the following notices to avoid dangers and damages:
9.1 Security advices
Attention
► Repairs of electrical appliances must be carried out by qualified personnel who are trained by the manufacturer.
► Repairs performed by untrained persons may result in considerable hazards for the user and damage the machine.
9.2 Troubleshooting
Error
The appliance doesn't work.
Possible cause
Mains plug is not connected correctly.
Electronic defect.
Problem solving
Please check that the mains plug of the applicance is connected correctly.
Please contact customer support.
ATTENTION
► If above mentioned steps don't solve the problem, please contact your customer service.
10 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they could be detrimental to human health and the environment. Therefore, do not put your old device into the non-recyclable waste under any circumstances.
Fomini Crema Inox 15
Please note
► Utilize the collection point, established in your town, to return and recycle old electric and electronic devices. If necessary, contact your town hall, local refuse collection service or your dealer for information.
► Ensure that your old device is stored safely away from children until it is taken away.
11 Guarantee
12 Months Limited Warranty
Caso Design USA warrants that for a period of 12 months from the date of purchase, this product will be free from defects in material and workmanship. Caso Design USA at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. DO NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of the initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance.
This limited warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than
Caso Design USA service center. Further this limited warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on Caso Design USA’s Liability?
Caso Design USA shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. Caso Design USA disclaims all other warranties, conditions, or representations, express implied, statutory or otherwise.
Caso Design USA shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of the incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state, or jurisdiction to jurisdiction.
Fomini Crema Inox 16
12 Technical Data
Device
Name
Model
Item No.:
Mains data
Power consumption
Capacity frothing
Capacity warming
External measurements
Net weight
Milkfrother
Fomini Crema Inox
MMF-802-V2
11662
120 V, 60 Hz
400 W
Min: 2 fl oz, Max: 4 fl oz
Min. 2 fl oz, Max: 8 fl oz
3.92
” x 7.87
” x 3.93
”
1.5 lbs
Fomini Crema Inox 17
Advertisement
