Biamp 29QPM Quality Powered Mixers Manual

29QPM
¢ Discrete bipolar front-end with variable trim and high slew
rate, extended band-width transistors for ultra low noise and
outstanding EIN.
Two independent sends per channel. One is pre-fader,
pre-EQ for stage monitor mixing, the other post-fader,
post-EQ for effects send.
* Optional phantom power.
* Dual 10-segment LED ladder metering.
e Separate headphone jacks for main and monitoring outputs.
® Two input channels with instrument level inputs... 10 times
the gain of line level inputs... ideal for input from guitars, for
example.
e Two input channels with patch insertion points for flexibility
with outboard effects devices.
* 3-band EQ on each input channel.
¢ Dual 9-band graphic equalizers.
e Stereo console model in either 8 or 12 input channels.
e Optional 16-program Integral Digital Reverb (IDR) with
digital program control and readout.
INTEGRAL DIGITAL REVERB
e Custom 16-bit high speed VLSI digital signal processor from
Alesis includes sixteen proprietary reverb programs
covering the most useful combinations of room size, decay
times and filtering. Two gated and two reverse effects are
included.
¢ Digital program control and readout are conveniently
integrated directly into the 29QPM control panel, eliminating
the expense of extra rack space and interconnecting cables,
and the operating inconvenience of outboard digital reverb
units.
® Includes provisions for footswitch remote control of the
reverb defeat and program selection functions.
* The high sample rate of the 16-bit VLSI processor produces
high quality digital reverb with sonic performance compatible
with the uncompromising BIAMP standards.
lQOMP_ 2152 anse
Biamp Systems, 14270 NW. Science Park, Portland, Oregon 97229 (503) 641-7287
QUALITY POWERED
MIXERS
PERFORMANCE SPECIFICATIONS 29QPM 29QPM
a POWER AMPLIFIER SECTION: MAXIMUM INPUT LEVEL
This print out from BIAMP's automatic The 22QPM EQ filters are precise and OUTPUT POWER @ 1 KHZ LOW Z 7 dam
test equipment clearly illustrates the smooth from full cut to full boost, provid- BOTA CHANNELS DRIVEN: 175 WATTS Ez Ta da
current handling capability of the ing excellent tuning without coloration of 4 OHMS 290 WATTS AMP +8 dBm
29QPM... producing 350 watts into a the program material. 2 OHMS 470 WATTS PHONO N/A
: SINGLE CHANNEL DRIVEN:
2-Ohm load... adding more speakers 8 OHMS 210 WATTS
не OUTPUT IMPEDANCE
will increase output power. 4 OHMS 350 WATTS MAIN OUT 100 OHMS
2 OHMS 525 WATTS MONITOR OUT 100 OHMS
7 TE ' ET 0 EFX SEND 100 OHMS
BIAMP SYSTEMS INC 19-AMP BANDPASS(dBu) & LEVEL(H) vs FREQ(Hz)BL AUG № 16:16:41 BIAMP SYSTEMS INC 1951 4 AMPL(dBu) vs FREQ He) rn 3 JUL В 16:42:23 SIGNAL/NOISE RATIO EC OUT 100 SMS
9 res DUENDE PUN A Do O EOI : A-WEIGHTED 108 dB SUBS 100 OHMS
| * Mae: BEEN | i PEE SE 30 KHZ FILTER 98 dB
bo | | 20HMS. Ebert lee 1390.8 MERE A E | MAXIMUM OUTPUT LEVEL
PRETO TR | 10, 008: У Рот THD (20 HZ-20 KHZ) BOTH CHANNELS MAIN +18 dBv @ >2K OHMS
Lert 11 1 11140 POE OP : DRIVEN MONITOR +18 dBv @ >2K OHMS
CAL rtd N AT 150 WATTS INTO 4 OHMS <0.25% EFX +18 dBv @ >2K OHMS
f EERE DOE IED N. AT 90% MAX PWR INTO 4 OHMS <0.30% EQ +18 dBv @ >2K OHMS
'40HMS: : PEE : 3 0808
-10,00: a a me ee EE ae ma EEE 298.8
Co Eke TE EE TR 5 SLEW RATE @ 4 OHMS 24V/MICROSEC DIMENSIONS 8CHAN 12 CHAN
TT = SE ЕЕЕЕЕ ГОРЕ! HEIGHT 8.25 IN 8.25 IN
"18, ео E: POSE E: UN a "200.0 0.8 FREQUENCY RESPONSE WIDTH 24.51N + 29.61N
PORTES EEES SE | DEPTH 23.3IN 233IN
1 a e CH BON | (20 HZ-20 KHZ)
-20 0 @ AMR mini ic nano 158,8 AT 1 WATT INTO 4 OHMS +0 d8, —0.3 dB
TE EERE РЕМ -5, 000 WEIGHT 491BS — 52LBS
Вр RI: ОЕ 0 2198,8 FREQUENCY RESPONSE CONNECTORS
REE SEE a -10, 99 ; Li @ +4dBm +0 dB, —0.5 dB INPUT XLR, Ya" PHONE
-38, BB i ; dotada A 450, 00 ' IA LOFT SENS : (20 HZ-20 KHZ)
О 1 E IE Le EEN POR POE : OUTPUT Ya" PHONE
os a 5 E E 0 15.00. ЕЕ Co EE | THD (20 HZ-20 KHZ) @ +4dBm
-35, Ark ' petits Preta kbd TUE ld: ' : A nr y INPUT CHANNELS <.15%
20 198 1k 10k 2k 20 100 ik 10k 28k METERING 10-SEGMENT
IMD (SMPTE) @+4dBm — 10% LED LADDER
D INPUT CHANNELS 9V/MICROSEC “POWER, GREEN LED
> SIGNAL PRESENT
PEAK RED LED/CHANNEL
COMMON MODE REJECTION OTHER
RATIO AT 60 HZ 60 dB
POWER REQUIREMENTS 120/240VAC 50/60 HZ
EIN (20 KHZ BANDWIDTH) —107 dB
LOW Z WITH 150 OHM TERM. POWER CONSUMPTION 1200 WATTS,
10 AMAX POWER
EQUALIZATION BOTH CHANNELS
INPUT CHANNELS EQ DRIVEN INTO 4 OHMS
GAIN/CENTERS +15 dB @ 50 HZ
+12 dB @ 3KHZ
+15 dB @ 15 KHZ
PROGRAM GRAPHIC EQ OTHER 2-OHM
= ‚ САМ +12 dB OPERATION
‘ CENTERS 50 HZ, 100 HZ, 200 HZ SOFT CLIP AUTO-LIMIT
400 HZ, 800 HZ, OPTIONAL
1.6 KHZ, 3.2 KHZ, PHANTOM POWER
6.3 KHZ, 12,5 KHZ TAPE IN/OUT
OVERALL SYSTEM
INPUT IMPEDANCE
LOWZ >3K OHMS
HIGHZ >24K OHMS
INSTRUMENT >100K OHMS
EFX/AUX RETURN 12K OHMS
MAINS RETURN 30K OHMS
SUBS RETURN 20K OHMS
EQIN 8K OHMS
AMP IN 20K OHMS
CHANNEL PATCH 3K OHMS
TAPE IN 10K OHMS