Kohler Cimarron 1-piece 1.28 GPF Single Flush Elongated Toilet Installation guide

Kohler K-3619-RA-0 is a toilet that is designed to be easy to install and maintain. It comes with a wax ring and depth gauges to help you get a perfect fit, and the bolts are adjustable to accommodate different floor heights. The toilet also features a powerful flush that will keep your bowl clean and free of clogs.

PDF Download
Document
Kohler Cimarron 1-piece 1.28 GPF Single Flush Elongated Toilet Installation guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Easy to install
  • Wax ring and depth gauges included
  • Adjustable bolts
  • Powerful flush

Frequently asked questions

To install the toilet, follow these steps: 1. Remove the old toilet, T-bolts, and wax ring. Inspect and repair the water supply and waste flange. If the toilet will not be installed right away, temporarily plug the waste flange with a rag. 2. Insert the nuts in the flange. Insert a depth gauge firmly into each nut. 3. Install the wax ring. 4. Carefully lower the toilet onto the flange, holes aligned with the depth gauges. 5. Grip the depth gauge even with the top edge of the hole. 6. Keeping your fingers in place, remove the depth gauges. Note the location of your fingers. 7. Install the washers and bolts. 8. Tighten the bolts. Install the cap. 9. Connect the water supply. Check for leaks.

To adjust the water level, follow these steps: 1. Remove the cap from the top of the tank. 2. Turn the adjustment screw clockwise to raise the water level or counterclockwise to lower the water level. 3. Replace the cap.

To clean the toilet, follow these steps: 1. Flush the toilet. 2. Apply a toilet cleaner to the bowl and under the rim. 3. Let the cleaner sit for several minutes. 4. Scrub the bowl and rim with a toilet brush. 5. Flush the toilet again.
Preparing document for printing…
0%