Bosch HDD80051UC 800 37-in Telescoping Stainless Steel Downdraft Range Hood Dimensions Guide

Add to my manuals
14 Pages

advertisement

Bosch HDD80051UC 800 37-in Telescoping Stainless Steel Downdraft Range Hood Dimensions Guide | Manualzz

30" Downdraft

800 Series Downdraft – HDD80051UC

HDD80051UC

Stainless Steel

Sleek, built-in, and retracts out of sight.

Bosch 30" Downdraft's flexible design seamlessly integrates into your kitchen

Features & Benefits

Beautifully designed to preserve clean sight lines when not in use

Quiet at 2.1 sones* on low speed

Sleek front panel filter design acts as a guard against splatters

6 exhaust connections possible (transition sold separately)

Recirculation kit for sale for use in non ducted applications**

General Properties

Operating mode

Maximum CFM

Sones*

Number of speed settings

Motor location

Damper included

Grease filter material

Grease filter type

Duct direction

Convertible: ducted / recirculating

Blower sold separately

2.1 WS / 11.8 HS

3-stage

External

No

Aluminum

Optional blower required

Multilayer cassette

Front, Left, Right,

Rear, Down

Yes (600 CFM options sold separately)

Technical Details

Volts (V)

Frequency (Hz)

Plug type

120 V

60 Hz

120V-3 prong

Power cord length (in.) 30"

Dimensions & Weight

Overall appliance dimensions (width of canopy included)

(HxWxD) (in.)

29 3/8" x 31" x

2 3/4"

Height of the rise (in.) 12"

Diameter of air duct (in.) internal

8"

Diameter of air duct (in.) external

6" or 8"

Net weight (lbs) 37 lbs

Accessories—Required

Blower (sold separately)

Accessories—Transitions & Blowers

6" side/rear/downward transition

8" side/rear/downward transition

HDDSTRAN6

HDDSTRAN8

NOTE: HDDSTRAN6 or HDDSTRAN8 required for side, rear or downward exhaust applications with inline and remote blowers.

6" round front plate

8" round front plate

HDDFTRAN6

HDDFTRAN8

NOTE: HDDFTRAN6 or HDDFTRAN8 required for front exhaust applications with inline and remote blowers.

Transition for rectangular duct

HDDSTRAN2

2' rectangular duct HDD2RECTD

NOTE: HDDSTRAN2 needed to attach HDD2RECTD to downdraft. For use with installation of inline or remote blower applications.

600 CFM flexible blower DHG602DUC

600 CFM inline blower DHG6015NUC

600 CFM remote blower DHG6023RUC

Accessories—Optional

Recirculation kit

Charcoal filter replacement for recirculation kit

HDDREC5UC

HDDFILTUC

30" gas cooktop seal kit for downdraft

(required for installation with gas cooktops)

Trim kit for 30"

FlameSelect® gas cooktops

HDD0RSP

HDDTRIM30S

*Sound test performed as per HVI standards at independent lab.

* *Recirculation kit (sold separately) is compatible with electric, induction and FlameSelect Gas cooktops only

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Installation Details

PRODUCT

CLEARANCES

Downdraft electrical cable is 30" long

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Installation Details – Cutouts

GAS

Template

2-1/8" (54)

Downdraft cutout width:

30" (762) is 27-1/16" (687)

36" (914) is 33-1/16" (840)

1-1/16"

(27)

BT

24-11/16" (628)

22-5/16" (567)

19-1/8" (486)

MIN.

1/2"

(13)

Cooktop cutout width

1-7/8" (48)

ELECTRIC AND INDUCTION

Downdraft cutout width:

30" (762) is 27-1/16" (687)

36" (914) is 33-1/16" (840)

Template

2-1/8" (54)

11/16"

(17)

25-7/16" - 25-9/16"

(646 - 649)

22-11/16" - 22-13/16"

(576 - 579)

19-7/8" - 20"

(505 - 508)

MIN.

1/2"

(13)

BT

Cooktop cutout width

2-1/4" (57)

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Accessories – Transitions

SIDE/REAR TRANSITIONS FOR DOWNDRAFT

6" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

HDDSTRAN6

6" Side/Rear/

Downward Transition for Downdraft

Flexible transition design allows for left, right, rear or downward venting

Front rough-in plate may be used with a

6" round duct or elbow

Ability to use with DHG6015NUC inline or

DHG6023RUC remote blowers

Some blower positions may need deeper cabinets. See installation guide

ROUND FRONT PLATES FOR DOWNDRAFT

6" Front rough-in plate enable ducting to be at front of downdraft, for use with inline and remote blower applications

HDDFTRAN6

6" Round Front Plate for Downdraft

Front rough-in plate design allows for front venting

Front rough-in plate may be used with a 6" round duct or elbow

Ability to use with DHG6015NUC inline or

DHG6023RUC remote blowers

HDDSTRAN8

8" Side/Rear/

Downward Transition for Downdraft

8" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

Flexible transition design allows for left, right, rear or downward venting

For DHG602DUC flexible downdraft blower used as inline installation

Some blower positions may need deeper cabinets. See installation guide

HDDFTRAN8

8" Round Front Plate for Downdraft

8" Front rough-in plate enable ducting to be at front of downdraft, for use with inline and remote blower applications

Front rough-in plate design allows for front venting

Front rough-in plate may be used with a 8" round duct or elbow

For DHG602DUC flexible downdraft blower used as inline installation

NOTE: HDDSTRAN6 or HDDSTRAN8 side/rear/downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

NOTE: HDDFTRAN6 or HDDFTRAN8 front plate required for front exhaust applications with inline and remote blowers.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Accessories – Transitions

TRANSITION FOR RECTANGULAR DUCT FOR DOWNDRAFT

Rectangular duct transition required to connect 2’ rectangular duct to downdraft

HDDSTRAN2

Transition for

Rectangular Duct for Downdraft

2' RECTANGULAR DUCT FOR DOWNDRAFT

2' Rectangular duct can be used as extension to exhaust through a cabinet or wall while maximizing cabinet storage space

HDD2RECTD

2' Rectangular Duct

Downdraft

Duct can be used as an extension to exhaust through a cabinet or wall

May be attached to sides or rear of downdraft housing

HDDRECTRN transition needed to connect

HDD2RECTD to downdraft housing

For use with remote or inline blowers

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Accessories – 600 CFM Blowers

DHG6015NUC

600 CFM Inline

Blower

600 CFM inline blower

For use with Bosch downdrafts

Inline blowers can be mounted remotely to minimize blower noise in the cooking area

Designed to be mounted inline with the ducting installation.

Blower is mounted on roof of exterior wall depending on application needs.

6" transition required

DHG602DUC

600 CFM Flexible

Integral Blower –

HDD Downdrafts

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Capable up to 600 CFM in performance

Blower is able to mount to downdraft or be used as an inline blower

Blower can be rotated to exhaust downward or toward sides

Additional accessories may be required for installation, see manual

DHG6023RUC

600 CFM Remote

Blower

600 CFM remote blower

For use with Bosch downdrafts

Can be mounted on the exterior of the home to minimize noise in the cooking area.

Blower is mounted on roof of exterior wall depending on application needs.

6" transition required

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Accessories – Optional

HDDREC5UC

Recirculation Kit for Downdraft

Installation Details

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

When ducting is not feasible, kit eliminates need to exhaust outside

Air is filtered through charcoal filter, then re-enters kitchen

Includes recirculation module, filter and metal grille vent plate

Designed to work with both 30" and 36" bosch downdrafts, HDD series

Use with induction/electric cooktops only

HDDFILTUC

Charcoal Filter

Replacement for

Recirculation Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

Replacement charcoal filter for HDDREC5UC recirculation kit

Quality charcoal filter effectively captures and filters odors

Replace charcoal filter every 6 months depending on usage

HDD0RSP

30" Gas Cooktop Seal

Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

Includes trim, seal, metal grill, and fasteners

Required for installation with gas cooktops

HDDTRIM30S

Trim Kit for 30"

FlameSelect® Gas

Cooktops

30" trim kit for installation with

30" FlameSelect® gas cooktops

Includes trim kit and installation tool

Required for installation with 30"

FlameSelect® gas cooktops

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Front Exhaust Example

Application

• Flexible blower attached can rotate for left, right or downward discharge

• Front downward application with flexible blower

• Requires space under floor line for ductwork*

• Can be used with optional Recirculation Kit, sold separately

• Elbow, ductwork, blower support structure frame not included

Required Blower

DHG602DUC

600 CFM Flexible Integral Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Optional Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

HDDFILTUC

Charcoal Filter Replacement for

Recirculation Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

* For only front downward ducting applications, electrical panel must be remotely mounted. Electrical panel can still be remotely mounted in other exhaust configurations if desired. Electrical panel interconnect cable length is 5-ft. long.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Front Exhaust with Flexible Blower

Used as an Inline Option Example

Application

• Side exhaust with flexible blower used as inline option if ducting is more convenient with this configuration

• Requires at least 18" of clearance to fit the blower and transition

• Blower must be accessible for maintenance

• Elbow, ductwork, blower support structure frame not included

Required Blower

DHG602DUC

600 CFM Flexible Integral Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Required Accessories

HDDFTRAN8

8" Round Front Plate for

Downdraft

8" Front rough-in plate enable ducting to be at front of downdraft, for use with inline and remote blower applications

NOTE: HDDFTRAN8 front plate required for front exhaust applications with inline and remote blowers.

Optional Accessories

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

NOTE: Some applications may require deeper cabinets. Side and rear exhaust require at least 18" of clearance to fit the blower and / or ductwork. Refer to installation instructions.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Side Exhaust Example

Application

• Side exhaust option if ducting is more convenient with this configuration

• Requires at least 18" of clearance to fit the blower and transition

• Can be used with optional Recirculation Kit, sold separately

• Elbow, ductwork, blower support structure frame not included

Required Blower

Left Side Exhaust

DHG602DUC

600 CFM Flexible Integral

Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Optional Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

Right Side Exhaust

Required Accessories

HDDSTRAN8

8" Side/Rear/Downward

Transition for Downdraft

8" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

NOTE: HDDSTRAN8 side/rear/ downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

HDDFILTUC

Charcoal Filter Replacement for Recirculation Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

NOTE: Some applications may require deeper cabinets. Side and rear exhaust require at least 18" of clearance to fit the blower and / or ductwork. Refer to installation instructions.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Side Exhaust with Slim 2' Rectangular Duct Example

Application

• Side exhaust option if ducting is more convenient with this configuration

• A slim 2' rectangular duct is available to place flexible blower in areas such as unused corner in island or peninsula applications

• Can be used with optional Recirculation Kit, sold separately

• Elbow, ductwork, blower support structure frame not included

Required Blower

DHG602DUC

600 CFM Flexible Integral

Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Required Accessories

HDD2RECTD

2' Rectangular

Duct Downdraft

2' Rectangular duct can be used as extension to exhaust through a cabinet or wall while maximizing cabinet storage space

Optional Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

HDDSTRAN2

Transition for Rectangular

Duct for Downdraft

Rectangular duct transition required to connect

2' rectangular duct to downdraft

HDDSTRAN8

8" Side/Rear/Downward

Transition for Downdraft

8" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

NOTE: HDDSTRAN8 side/rear/ downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

HDDFILTUC

Charcoal Filter Replacement for Recirculation

Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

NOTE: Some applications may require deeper cabinets. Side and rear exhaust require at least 18" of clearance to fit the blower and / or ductwork. Refer to installation instructions.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Rear Exhaust Example

Application

• Rear exhaust option is possible if ducting is more convenient with this configuration

• Requires at least 18" of clearance to fit the blower and transition

• Blower must be accessible for maintenance

• Can be used with optional Recirculation Kit, sold separately

• Elbow, ductwork, blower support structure frame not included

Required Blower

DHG602DUC

600 CFM Flexible Integral Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Required Accessories

HDDSTRAN8

8" Side/Rear/Downward

Transition for Downdraft

8" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

NOTE: HDDSTRAN8 side/rear/ downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

Optional Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

HDDFILTUC

Charcoal Filter Replacement for Recirculation Kit or Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

NOTE: Some applications may require deeper cabinets. Side and rear exhaust require at least 18" of clearance to fit the blower and / or ductwork. Refer to installation instructions.

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

Flexible Blower Installation – Downward Exhaust Example

Application

• Downward exhaust option if ducting is more convenient with this configuration

• Requires at least 18" of clearance to fit the blower and transition

• Can be used with optional Recirculation Kit, sold separately

• Elbow, ductwork, blower support structure frame not included

• Blower must be accessible for maintenance

• Can also be installed with inline and remote blowers

Required Blower

DHG602DUC

600 CFM Flexible Integral

Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides

Required Accessories

HDDSTRAN8

8" Side/Rear/Downward

Transition for Downdraft

8" Round transition enable ducting to be at sides, rear or below downdraft for flexible configurations to maximize your kitchen design

NOTE: HDDSTRAN8 side/rear/ downward transition required for side, rear or downward exhaust applications with inline and remote blowers.

Optional Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

HDDFILTUC

Charcoal Filter Replacement for Recirculation Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

09/19

30" Downdraft

800 Series Downdraft – HDD80051UC

INSTALL THE

RECIRCULATION BOX

1. Cut opening in cabinet base.

RECIRCULATION BOX

(368)

• Size: 14 1/2” (368) x 15” (380)

Flexible Blower Installation – Recirculation Example

Application

• Allows for non-ducted downdraft installation by eliminating the need to exhaust to the exterior of the home

• Mount to toe kick or base of a cabinet and attach directly to flexible blower

• Recirculation module and metal grill vent plate placement can be rotated for flexible exhaust placement

• Elbow, ductwork, blower support structure frame not included

Required Blower

DHG602DUC

600 CFM Flexible Integral

Blower

600 CFM flexible blower can mount to downdraft or be used as an inline blower, and can be rotated to exhaust downward or to sides Required Accessories

HDDREC5UC

Recirculation Kit for Downdraft

When ducting to the exterior is not feasible, downdraft recirculation kit allows filtered air to reenter the kitchen while cooking

14 1/2”

(368)

EXHAUST

THROUGH

CABINET

SIDE

EXHAUST

THROUGH

CABINET

SIDE

Optional Accessories

HDDFILTUC

Charcoal Filter Replacement for Recirculation Kit for Downdraft

Maintain performance of Bosch downdraft recirculation kit with timely replacement of charcoal filter to capture and filter odors

HDD0RSP

30" Gas Cooktop Seal Kit for Downdraft

30" gas cooktop seal kit required for installation with 30" gas cooktops

15”

(380)

3. Remove recirculation box from opening.

• Mark location of exhaust opening in toe space, rear, or side of cabinet.

4. Cut exhaust opening.

3. Remove recirculation box from opening.

• Size: 3 1/2” (89) x 14 1/4” (362)

4. Cut exhaust opening.

• Size: 3 1/2” (89) x 14 1/4” (362) location.

air tight. Do not use duct tape.

Measurements in inches (mm).

• Seal the duct connection(s) with aluminum tape to make them secure and

3 1/2" (89) x 14 1/4" (362)

EXHAUST OPENING

DECORATIVE

GRILLE

EXHAUST

THROUGH

CABINET

BACK

14 1/2"

(368)

3 1/2" (89) x 14 1/4" (362)

EXHAUST OPENING

DECORATIVE

GRILLE

EXHAUST

THROUGH

CABINET

BACK

14 1/2"

(368)

6. Install blower.

• See blower instructions.

• Use 6 - #10 x .625” screws to secure recirculation box to cabinet base.

6. Install blower.

• Use 8” (203) round duct to connect blower exhaust to recirculation box inlet

• Seal the duct connections with aluminum tape to make them secure and air tight. Do not use duct tape.

DECORATIVE

GRILLE

3 1/2" (89) x 14 1/4" (362)

EXHAUST OPENING

GRILLE mounting legs.

METAL 8” ROUND DUCT

(per local codes)

15"

(380)

3 1/2" (89) x 14 1/4" (362)

EXHAUST OPENING

15"

(380)

8.

• Drill 1/8” (3) pilot holes through top of recirculation box and attach legs to recirculation box with 4 - #8 x .375” screws.

7. Install decorative grille.

• Use screws provided.

to recirculation box with 4 - #8 x .375” screws.

7. Install decorative grille.

16”

(406)

8”

(203)

4 1/2”

OPTIONAL REMOTE BLOWER MOUNT

8.

Blower outlet and

BLOWER

Blower mounted to framing in remote location - using mounting brackets.

6 1/2”

(165)

12 1/4”

(311) recirculation box inlet must align.

(See below.)

Blower outlet and recirculation box inlet must align.

(See below.)

17 1/2”

(445)

16”

(406)

Notes: All height, width and depth dimensions are shown in inches. BSH reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice. Consult the product’s installation instructions for final dimensional data and other details prior to making cutout.

16”

(406)

09/19

Blower mounted Blower mounted

16”

(406)

DIMENSIONS

16”

DIMENSIONS

Accessories: To purchase Bosch accessories, cleaners & parts please visit www.bosch-home.com/us/store or call 1-800-944-2904 (Mon to Fri 5 am to 6 pm PST, Sat 6 am to 3 pm PST).

4 1/2”

(114)

Warranties: Please see Use & Care manual or Bosch website for statement of limited warranty.

3 3/4”

(95)

3 1/4”

For more information on our entire line of products, go to www.bosch-home.com/us or call 1-800-944-2904

(95) to downdraft using

14”

6 1/2”

© BSH Home Appliances Corporation. All rights reserved. Bosch is a registered trademark of Robert Bosch GmbH.

(356)

Measurements in inches (mm).

12 1/4”

(311)

(356)

15”

(380)

16”

(406)

BLOWER

ALIGN BLOWER

OUTLET WITH

RECIRCULATION

BOX INLET

BLOWER

ALIGN BLOWER

OUTLET WITH

MOUNTING

RECIRCULATION

LEGS

BOX INLET

MOUNTING

LEGS

EXHAUST THROUGH

CABINET FRONT (TOE KICK)

EXHAUST THROUGH

CABINET SIDE

EXHAUST THROUGH

CABINET BACK

CUSTOM-MADE

DECORATIVE GRILLE

amount of cooking you do. Call customer service or your local

The grille opening pattern is up to you.

2 min.

Page 5

EXHAUST THROUGH

CABINET BACK

2 min.

Page 5

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What is the required transition for side, rear or downward exhaust applications with inline and remote blowers?
HDDSTRAN6 or HDDSTRAN8 transition is required.
What is the required transition for front exhaust applications with inline and remote blowers?
HDDFTRAN6 or HDDFTRAN8 front plate is required.
What type of grease filter does the Bosch HDD80051UC have?
The Bosch HDD80051UC has a multilayer cassette type of grease filter.
What is the diameter of the internal air duct?
The internal air duct has a diameter of 8 inches.
What is the diameter of the external air duct?
The external air duct has a diameter of 6 or 8 inches.
What is the CFM rating of the optional blower for the Bosch HDD80051UC?
The optional blower has a CFM rating of 600 CFM.
What is the maximum CFM of the Bosch HDD80051UC?
The maximum CFM is 600 CFM, with the blower sold separately.
What is the voltage and frequency of the Bosch HDD80051UC?
The Bosch HDD80051UC operates on 120 volts and 60 hertz.
What type of plug does the Bosch HDD80051UC have?
The Bosch HDD80051UC has a 120V-3 prong plug.
What is the length of the power cord?
The power cord length is 30 inches.
Download PDF

advertisement