Samsung NK36K7000WG Ducted Fingerprint Resistant Black Stainless Steel Wall-Mounted Range Hood Dimensions Guide

Samsung NK36K7000WG Ducted Fingerprint Resistant Black Stainless Steel Wall-Mounted Range Hood Dimensions Guide
Installation Requirements
Tools and Parts Dimensions and Clearances
Parts supplied
Removing the packaging
/ CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
A WARNING
Remove the protective film covering the product before putting into
operation.
* Hood canopy assembly with blower and LED lamps already installed.
« 6° (15.2 cm) round air transition
+ Duct covers
+ Hardware bag with:
EEC CA o CT
aman
6 5.4x75 mm screws 4
JE mm For TOREO mr way
anchors)
> Torx 10 te '
8x40 mm orx 10 adapter NK30K7000WS NK36K7000WS5
= . NK30K7000WG NK36K7000WG
ve) 2 “ ä 1
3.5x5.5 mm Duct cover brackef A 30” 36"
. (76 cm) (91.2 cm)
|
ua) ‘ = ; B 19%" (50 em)
4x8 mm | mage
rm RE
Mounting fempiate c max. 434” (110.1 cm)
min. 2945” (73.8 cm)
4 n
we max. 392%" (100.3 cm)
10x 60 mm D min. 25256" (64.5 cm)
Tools/Materials required E 67 (15.24 cm)
» Level
* Drill with 1%” (3.2 cm), 36” (3.2 mm), and 4” (4,8 mm) drill bits F 10342" (26.9 ст)
+ Pencil
= Wire stripper or utility knife G 13564" (33.2 cm)
* Tape measure or ruler
+ Pliers H 2%” (6 CM)
+ Caulking gun and weatherproof caulking compound
+ Vent clamps *For non-vented (recirculating installations)
» Jigsaw or keyhole saw For vented installations
* Flat-blade screwdriver
= Metal snips
= Phillips & Torx 20 screwdriver
Parts needed
- Home power supply cable
« 5 (12.7 mm) UL listed or CSA approved strain relief
= 3 UL listed wire connectors
For vented installations, you will also need:
* 1 wall or roof cap
= Metal vent system
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement