Bosch WAT28400UC 300 2-cu ft High Efficiency Stackable Front-Load Washer Use and Care Manual
Advertisement
Advertisement
en-us Use and Care Manual, Installation Instructions
Washer
WAT28400UC
Welcome to Your New Washer!
Congratulations on your selection of a new Bosch washer for your laundry needs. We are confident you will enjoy the superior performance and reliability.
Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new washer.
Thank you for choosing Bosch.
Visit our web site at www.bosch-home.com/us for more information and to view a selection of our products.
2
Table of contents
Use and Care Manual, Installation Instructions
Important information ................................................... 4
Purchase information ........................................................... 4
Customer service ................................................................. 4
Your washing machine is intended for ........................ 5
Importance and meaning of symbols .......................... 5
IMPORTANT SAFETY INSTRUCTIONS ........................ 6
Introduction to your new washer ................................. 7
Standard features and helpful information ...................... 7
Special features .................................................................... 7
Environmentally friendly use of your washer ................... 8
Dimensions and clearances required .......................... 8
Appliance dimensions ......................................................... 8
Length of power cord and water supply hoses .............. 8
Installation types ................................................................... 9
Installation instructions .............................................. 10
Introduction ......................................................................... 10
Tools needed ..................................................................... 11
Waste disposal .................................................................. 11
Parts provided with your washer .................................... 11
Set up on a pedestal with drawer .................................. 12
Installation checklist .......................................................... 12
Importance of installing on a solid, level floor ............. 12
Remove the transport bolts ............................................. 13
Water connections ............................................................ 13
Leveling the washer .......................................................... 15
Electrical connection ........................................................ 16
Transporting the washer .................................................. 17
Getting to know your appliance ................................. 18
Control panel ...................................................................... 18
Operating Instructions ................................................ 19
Before doing any laundry with
your washing machine ..................................................... 19
Before loading your first load of laundry ...................... 19
Using the cycle selector to choose a wash cycle ...... 19
Changing default cycle settings ..................................... 19
Selecting additional cycle settings ................................. 19
Loading the laundry .......................................................... 19
Filling the detergent and additives compartments ..... 20
Starting the cycle ............................................................... 21
Child lock ............................................................................ 21
Selecting a different cycle ............................................... 21
Pausing/Adding a garment to the cycle ....................... 21
Cancel cycle ....................................................................... 21
Cycle end ............................................................................ 21
Removing laundry/switching the appliance off ........... 22
Signal ............................................................................ 22
Laundry ........................................................................ 23
Preparing the laundry ....................................................... 23
Sorting the Laundry .......................................................... 23
Identifying and treating stains ......................................... 23
Laundry detergents and additives ............................. 24
Adding the correct amount of HE detergent ............... 24
Program selection table ............................................. 25
Starching ............................................................................. 26
Dyeing/bleaching .............................................................. 26
Soaking ............................................................................... 26
Default Program and Option settings ....................... 26
Changing the temperature range ................................... 26
Changing the spin speed range .................................... 26
Finish in ............................................................................... 26
Additional Program Option settings .......................... 27
Extra Rinse +1, +2
................................................................. 27
Prewash PW
......................................................................... 27
SpeedPerfect G
............................................................. 27
Cleaning and maintenance ......................................... 27
Cleaning the housing and control panel ...................... 27
Cleaning the drum ............................................................ 27
Descaling the washer ....................................................... 27
Cleaning the detergent dispenser tray ......................... 27
Cleaning the water inlet strainers .................................. 28
Cleaning the drain pump ................................................. 28
Troubleshooting .......................................................... 30
Emergency door lock release ........................................ 30
General Troubleshooting ................................................. 30
Error messages ................................................................. 33
Customer service ........................................................ 33
STATEMENT OF LIMITED PRODUCT WARRANTY ... 34
What this Warranty Covers & Who it Applies to ......... 34
Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com
and in the online shop www.bosch-eshop.com
4XHVWLRQV"
ZZZERVFKKRPHFRP
0DLQ6WUHHW6XLWH
,UYLQH&$
:HORRNIRUZDUGWRKHDULQJIURP\RX
3
4
Important information
Purchase information
Please take a moment to record the following basic information about your new Bosch washer.
This information will be helpful in the event you need to contact Customer Service or would like to order accessories or replacement parts.
(1U )'
The E-Nr.
(model number) and the FD (serial) number are found on the rating plate label.
see illustration
The model number includes the slash and a two digit number (eg: "/27"). Please be sure to include the final 2 digit number when filling in your model number. This helps make sure any parts you may need are correctly matched to your specific machine.
Date of Purchase:___/___/_____
Where Purchased:___________________________
E-Nr.
:_________/____ (ex: WFVC5330US/27)
FD :_______-_______ (ex: FD 9005| 90001)
Customer service
Your washer does not require any special care other than the maintenance and care mentioned in this manual. If you have a problem with your washer, please consult
This may save you money. If a technician comes out to advise you of information that is in the Troubleshooting table you may be charged, even if your washer is still under warranty.
If problems persist and service becomes necessary, contact your dealer, installer or an authorized service center. Do not attempt to repair the appliance yourself.
Any work performed by unauthorized personnel may void the warranty.
If you are having a problem with your washing machine and are not pleased with the service you have received, please follow these steps:
1.
Contact your installer or the Authorized Service
Provider in your area and explain to them why you are not satisfied. This will usually correct the problem.
2.
If after working with your installer or service technician the problem still has not been resolved to your satisfaction, please let us know either by writing to us at:
BSH Home Appliances
1901 Main Street, Suite 600
Irvine, CA 92614 or calling us at:
1-800-944-2904
When writing or calling please have the following information available:
▯
▯
E-Nr. (model number, example: WTVC3300UC/27)
FD (serial) number
▯
▯
Date of Original Purchase (receipt required)
Date Problem Occurred
▯
Explanation of Problem
If writing, please also include a daytime telephone number and a copy of the sales invoice.
When calling Customer Service, please be ready to provide the model number E-Nr.
and FD (serial) number.
This information will help provide the best support for your washer.
Additional information is available at our website. www.bosch-home.com/us
Your washing machine is intended for
▯
▯
▯
Only household use and in a non-commercial environment.
Household use only washing machine-washable textiles.
Washing with common cold and hot (maximum
140 °F/60 °C) tap water and commercially available detergents and cleaning products suitable for use in washing machines.
▯
We recommend HE (High Efficiency) detergents because they are designed to deliver optimum performance from your front-loading washer. Not using HE detergent could cause problems such as oversudsing, extended cycle periods, or a decrease in wash performance.
NOTICE: Do not use chlorine bleach!
▯
▯
▯
When measuring all detergents/stain removers/ laundry care products be sure to follow the manufacturer's instructions.
Children must not do any laundry without supervision.
Keep pets away from the washer.
▯
▯
Set-up conditions:
Ambient temperature: 32-104 °F/0-40 °C
Relative humidity: under 95%
Installation by qualified installers.
▯
Installation in accordance with all regulatory requirements; if in doubt have the appliance installed by a specialist familiar with these requirements.
Read the use and set-up instructions and all other information included with the washer and act accordingly.
Keep documents for future use.
Importance and meaning of symbols
Important safety information is contained in this manual and on the warning labels located on your washer.
Standard symbols and headings are used to identify areas where you should take precautions to avoid injury or damage. Please take a moment to become familiar with each of these symbols and what they mean before proceeding.
9 WARNING
ELECTRICAL SHOCK HAZARD
This indicates that death or serious injuries may occur as a result of non-observance of this warning.
9 CAUTION
This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.
NOTICE: This indicates that damage to the appliance or property may occur as a result of non-observance of this warning.
Tip: This symbol is used to draw the user's attention to important matters.
5
9
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING
When properly cared for, your new appliance has been designed to be safe and reliable. Read all instructions carefully before use. These precautions will reduce the risk of burns, electric shock, fire, and injury to persons.
When using appliances, basic safety precautions must be followed, including those in the following pages.
Examine the appliance after unpacking it. In the event of transport damage, do not plug it in.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
SERIOUS INJURY OR DEATH WHEN USING YOUR
WASHING MACHINE, FOLLOW BASIC PRECAUTIONS
INCLUDING THE FOLLOWING
▯
Bosch washers are provided with an Operating, Care and Installation Instruction manual. Read and understand all instructions before using the washing machine.
▯
▯
▯
▯
▯
Do not wash articles that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.
Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or explode.
Under certain conditions hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for this length of time, turn on all hot water faucets and let the water flow out of each faucet for several minutes before using the washing machine. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame while carrying out this procedure.
Before the appliance is removed from service or discarded, remove the door to prevent children from playing or hiding inside. Also remove the power cord/ plug.
Do not allow anyone to climb, lean or hang on any part of the washer including any protruding components such as the appliance door or a pullout shelf.
▯
▯
▯
▯
Use caution when draining hot water from the washer drum such as during pump maintenance or when using the emergency door open procedure.
Do not reach into the appliance if the wash drum is moving.
Do not tamper with the controls.
Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user manual or in published user repair instructions that you understand and have the skills to carry out.
6
▯
▯
▯
▯
▯
▯
▯
▯
▯
▯
Always unplug the washing machine from the power supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.
Do not machine wash fiberglass materials (such as curtains and window coverings that use fiberglass materials). Small particles may remain in the washing machine and stick to fabrics in subsequent wash loads causing skin irritation.
Do not install or store the washer where it will be exposed to the weather. Hoses and internal parts may be damaged if exposed to freezing temperatures.
Do not use the washing machine if it has a worn power cord or loose plug.
The washing machine must only be used for its intended purpose.
Always follow the fabric care instructions recommended by the clothing manufacturer.
Make sure all water connections to the washing machine have shut-off valves that are readily accessible during normal operation of the washer. Turn off both valves during periods in which the washer is not in use and before leaving for extended periods such as vacations to reduce the risk of water damage in the event of a leak. Turn the valves back on prior to resuming use of the washer.
Do not operate the washing machine if parts are missing or broken.
Do not operate the washing machine until you are sure that:
▯
▯ the washing machine has been installed according to the Installation Instructions.
all water, drain, power and grounding connections are in compliance with all local regulations and/or other applicable regulations and requirements.
See the installation instructions in this manual for grounding requirements.
~ Electrical connection; Page 16
9
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING
WARNINGS FOR CHILDREN
▯
Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the appliance is used near children.
▯
▯
▯
Make sure to utilize all child lock/safety features of your appliance, and be sure to turn the appliance Off when not in use.
Appliances are not intended for use by children, however when children become old enough to operate the appliance, it is the responsibility of the parents or legal guardians to ensure they are instructed in safe practices by qualified persons.
Keep all laundry aids (including detergents, bleach, fabric softener, etc.) out of the reach of children.
WARNING
STATE OF CALIFORNIA PROPOSITION 65 WARNINGS
This product contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.
SAVE THESE INSTRUCTIONS!
Keep These Instructions for Future Reference.
In case of change of ownership, manual should be conveyed with the washer.
Introduction to your new washer
9 WARNING
RISK OF FIRE, ELECTRIC SHOCK OR INJURY
To reduce the risk of fire, electric shock or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS of this manual before installing or operating this appliance.
~ IMPORTANT SAFETY INSTRUCTIONS; Page 6
Standard features and helpful information
Thank you for choosing Bosch for your laundry appliance needs.
Please read and follow the use & care, important safety instructions and troubleshooting information contained in this manual. Please retain this manual for future reference.
Standard features
▯
15.4 lb (7 kg) large drum capacity (for regular cotton loads).
▯
▯
Low washing and spinning noise levels.
Large door opening featuring magnetic lock, 160° opening angle.
Quality tested
Every Bosch washer is thoroughly tested before leaving the factory. As a result, a small amount of residual water may remain in the washer drum. We recommend running the Drum Clean program to remove this water prior to washing your first load of laundry.
~ Before loading your first load of laundry; Page 19
Web Site
Visit our web site at www.bosch-home.com/us for more information and to view a selection of our products.
About this manual
These operating and installation instructions may apply to more than one model of washer. Illustrations used may show details that differ from your particular model.
Read your user manual. It contains valuable information about safety, installation and operation of your new appliance.
This can save you time, make it easier to correctly install and use your washer, and improve your overall satisfaction with your new appliance.
Special features
▯
Load adjust matches the water and power consumption to each program according to the amount of laundry sensed in the drum and the type of fabric.
The load adjust function runs automatically to keep energy and water consumption as low as possible.
The water level sensor ensures the water level is correct for the laundry and the program selected.
▯
The automatic unbalanced load detection system spins the laundry several times to ensure even distribution.
If the laundry is not evenly distributed, the spin speed is reduced, or the laundry may not be spun for reasons of safety.
In the Wool program, the spin cycle is attempted only twice in order to prevent felting.
7
Environmentally friendly use of your washer
Your new Bosch washing machine is designed to use water, energy and detergent in a highly efficient way to help reduce operating costs, conserve resources and protect the environment.
▯
▯
Utilize the maximum amount of laundry for the appropriate program.
Avoid using too much detergent.
▯
Wash normally soiled laundry without a prewash.
▯
▯
▯
Save energy and detergent when washing lightly and normally soiled laundry.
Energy-saving mode : The display panel lighting goes out after a few minutes and Start/Pause flashes. To activate the display, touch any button.
Energy-saving mode is not activated if a program is running.
If the laundry will be dried in a dryer afterwards, select spin speed according to the dryer manufacturer’s instruction.
Dimensions and clearances required
Appliance dimensions
E
D
F
Length of power cord and water supply hoses
To left of washer* To right of washer*
Electric power cord
Water supply hoses
Drain Hose
U.S.
25 in.
38 in.
27 in.
Metric
64 cm
97 cm
U.S.
43 in.
21 in.
69 cm 46 in.
Metric
109 cm
53 cm
117 cm
* All distances are measured from indicated side when facing front of washer.
8
G
H
Label Dimension a width b depth
(to front of door) c d e height (minimum*) height (maximum*) side clearance
(door open 160°) depth
U.S.
23.6 in.
25 in.
33.2 in.
33.8 in.
13 in.
Metric
60 cm
64 cm
85 cm
86 cm
33 cm
41.5 in.
105,4 cm
(door open 90°)
Weight approximate 169.8 lbs. 77.2 kg
* height of appliance depends on the extension of the height adjustable appliance feet.
Installation types
Stacked washer and dryer
A Bosch dryer of the same dimensions can be placed on top of the washer to save space.
Use the special washer-dryer stacking kits (noted in
Bosch Dryer User Manuals) which can be purchased from customer service or your local dealer.
%
Stand alone (shown) or Side-by-Side
(
+
.
-
$
&
'
*
$
&
Under counter (Preferred)
'
Clearance requirements (Minimum)
A Both Sides
B
C
D
Top
Rear*
Front
0.6 in.
6.3 in.
2.5 in.
2.4 in.
1.5 cm
16 cm
6.4 cm
6.1 cm
* Rear clearance as close to wall as venting or water connection will allow. If the washer is installed with a dryer, the greater rear clearance for the dryer venting is required for the laundry pair.
Ventilation area (Minimum)
E Top 63 sq. in.
F Bottom 63 sq. in.
404 sq. cm
404 sq. cm
Vent spacing (actual not minimum dimensions)
J
K
G
H
37 in.
26 in.
3 in.
29 in.
94 cm
66 cm
7.6 cm
73 cm
$
%
&
Front of the appliance fully open.
No doors or coverings.
Minimum opening dimensions
A
B
C
28 in.
23.8 in.
35.5 in.
71.1 cm
60.5 cm
90.2 cm
9
Under counter (Less Desirable) If front of the appliance is covered ventilation openings must be installed.
E & F are minimum area sizes
E 63 sq.in.
F 63 sq.in.
404 sq.cm
404 sq.cm
G & H actual spacing dimensions for min. open area sizes
G
H
3 in.
14 in.
7.6 cm
35.6 cm
+
*
(
)
Installation instructions
9 WARNING
RISK OF FIRE, ELECTIRICAL SHOCK OR INJURY
TO PERSONS
To reduce the risk of fire, electric shock or injury to persons, read the Important Safety Instructions at the front of this manual before installing or operating this appliance.
9 CAUTION
WASHING MACHINE IS HEAVY
Use additional help and care when lifting and positioning.
Introduction
Read these installation instructions completely and carefully before starting to install your new washing machine. The information contained can save you time and effort and will help to ensure optimum performance of your new washer. Be sure to observe all warnings and cautions.
NOTICES
▯
Frozen hoses can tear or burst. Do not install the washing machine outdoors or in an area exposed to freezing condtions.
▯
▯
▯
If the washing machine is located in a room which will be exposed to temperatures below freezing, or if it is located in a cabin that is being shut down for the winter, any residual water in the pump or water inlet hose(s) must be drained.
Take care not to damage the washing machine. Do not hold on to protruding parts (e.g. door) when lifting.
Do not push against the appliance door glass due to risk of damage.
In addition to the safety information listed here, the local water and electric authorities may have special requirements that must be followed.
▯
▯
If in doubt, have the appliance installed by an authorized technican.
Hidden surfaces may have sharp edges. During service use caution when reaching inside the washer housing.
These installation instructions are intended for use by qualified installers. In addition to these instructions, the installation must comply with:
- for the United States - National Electrical Code, ANSI/
NFPA70 - and latest editions of the State and municipal and/or local regulations.
- for Canada - Canadian Electrical Code C22.1 - and the latest editions of the Provincial, Municipal and/or local regulations.
10
Tools needed
The following tools may be helpful during installation of your washer.
Parts provided with your washer
Back side of the washing mashine
▯
▯
▯
13mm socket for removing the transport bolts.
17mm wrench for adjusting the appliance feet.
Bubble level for leveling the appliance.
Waste disposal
Disposal of Packaging Materials
After unpacking your new appliance dispose of the protective packaging materials in an environmentally friendly way. Ask your dealer or inquire with your local authority regarding currently acceptable means of disposal.
9 WARNING
WARNINGS FOR CHILDREN
Do not let children play with packaging and associated parts to avoid risk of choking or suffocation.
Disposal of Your Old Appliance
Your old appliance can be recycled if it is no longer to be used. Prior to disposing of your old appliance observe the following precautions to reduce safety risks.
9 WARNING
TO AVOID RISK OF INJURY OR DEATH, DO THE
FOLLOWING
- after unplugging the old appliance, remove the electric power cord and dispose of properly.
- remove the door or permanently disable the door lock to prevent children from being locked inside.
( Power cord with plug
0 Literature pack; contents:
▯
User manual
▯
Warranty
▯
Covers with hose holders
8 Drain hose
@ Elbow to form the hose to fit the drain pipe
#
11
Washer drum contents
Two reinforced water supply hoses are shipped in the washer drum. Be sure to remove each of these items from the drum before using the washer.
+
Installation checklist
Review the following list and check off each step as it is completed during installation.
è
Installation Step
If installing to a pedestal
(base), complete the base installation before removing the transportation bolts
Completely remove all four shipping bolts keeping the bolt and bushing assemblies intact
Connect the water supply hose and drain hose
Connect the electrical power
Slide the washing machine into its final location
Level the washing machine
(as low as possible)
Before washing laundry, run the Drum Clean program
Page
~ Remove the transport bolts; Page 13
~ Remove the transport bolts; Page 13
~ Electrical connection; Page 16
~ Leveling the washer; Page 15
~ Before loading your first load of laundry; Page 19
H Hot water hose
P Cold water hose
NOTICE: If any parts are missing please notify your dealer immediately.
Set up on a pedestal with drawer
Pedestal item number: WMZ 20490
Mount washer on the pedestal according to the instructions in the installation kit.
3
Importance of installing on a solid, level floor
Your new Bosch washing machine utilizes high spin speeds to achieve superior water removal from your laundry resulting in reduced drying time. It is important to install your washing machine on a floor that will provide firm support. This prevents the washer from experiencing excess vibration during spinning that could cause the washer to move or be noisy.
The installation surface must be solid and level in both directions. Avoid installing your washer on soft surfaces such as floors with carpet or foam backed covering material.
If installing the washer on a wooden floor, observe the following:
▯
▯ install the washer in a corner for better support if possible.
if necessary, reinforce the floor by screwing a water resistant wooden board to the floor (minimum of
1.18 in./30 mm thick).
12
Remove the transport bolts
9 CAUTION
DAMAGE TO THE APPLIANCE OR INJURY
POSSIBLE
▯
The machine is secured for transport with transport bolts.
Transport bolts that are not removed can damage the drum during operation of the machine, the washer will vibrate, and it will be much noisier during spin cycles if the transport bolts are not removed before use.
▯
Be sure to remove all 4 transport bolts completely before first use. Keep the transport bolts.
If a pedestal was purchased with the washer, it must be installed first, prior to removing the transport bolts. Please consult the pedestal installation instructions.
In order to prevent transport damage during later transport, be sure to re-install the bolts before transport.
1.
Remove hoses from the brackets.
NOTICE: Keep the assemblies together and store them for later use such as when moving the washer.
2.
Loosen and remove all 4 transport bolts.
Remove the sleeves. Take the power cable out of the brackets.
3.
Place covers over the transport bolt holes
Four plastic covers are provided in the small parts bag included with your washer. Separate these covers and install one in each hole where the transport bolts were removed.
Lock covers firmly by pressing on the snap hook.
Insert hose holder. Secure hoses in the hose holders.
Water connections
Water supply hose connections
NOTICES
▯
The washing machine must only be operated with cold and hot (max. 140 °F/60 °C) tap water. Do not connect the appliance to the mixer tap of a pressurized hot-water boiler.
▯
To prevent water damage, the hot and cold water valves should be accessible when the washing machine is in place and should always be turned off when the washing machine is not in use.
▯
▯
If installing the washing machine in a new building or a building in which the plumbing system was recently installed or upgraded, flush the lines before installing the washing machine to remove any sand, dirt or residue.
To prevent leakage or water damage, follow the instructions in this chapter.
▯
If in doubt, have the appliance installed by an authorized technician.
Connect your washer to the wall faucets.
Observe each of the following:
▯
▯
Only use the new water supply hose shipped with your washer. Never use old used hoses.
The water supply hoses must not be kinked, bent, or pinched causing hose damage or restricting water flow.
13
▯
▯
▯
▯
▯
The water supply pressure must be between 14,5 to
145 psi (1 - 10 bar) with a minimum of 2.2 U.S. gallons
(8 liters) of flow per minute. A pressure regulator valve must be installed if the maximum water pressure is exceeded.
Make sure the water supply faucet is easily accessible when the washer is in use. The faucet should be turned off if the washer is going to be unused for extended periods of time.
Make sure rubber washers are in place at both ends of the water supply hose. Missing washers could cause leaks.
The connection points are under full water pressure.
Turn on the water tap and check for leaks.
Periodically inspect the water supply hose and replace with a new hose if cuts, kinks or leaks are observed.
Water drain hose connection
NOTICES
▯
Do not reuse an old drain hose. Only use the drain hose and parts included with your washer.
▯
Do not kink or modify the water drain hose.
Height of drain point
Height difference between the floor and drainage point: max. 39 in. (100 cm).
Types of drainage hookups
Standpipe
Water connection hoses
▯
▯ red - Hot water-hose blue - Cold water-hose
GUDLQ
SLSH
FDEOHWLH
Attach the drain hose to the elbow included with your washer.
Position the elbow on the drain hose 4" from end of hose as shown. Insert this section of the drain hose into the drain pipe. Secure the elbow and hose with a nylon tie strap or the equivalent to keep the hose from coming out of the drain pipe during use.
Sink siphon
Attach this end to water tap.
Hand tighten only.
Secure the drain hose to the sink siphon using a Ø 0.9 -
1.6 in. (20-44 mm) hose clip (available from a hardware store).
Attach this end of the hose to the back of the washing machine.
Hand tighten only.
14
Wash Basin
9 WARNING
SCALDING
When washing at high temperatures, there is a risk of scalding if you touch hot suds, e.g. when pumping out hot suds into a wash basin.
Do not reach into the hot suds.
Note: APPLIANCE DAMAGE/DAMAGE TO TEXTILES
If the end of the drain hose touches the discharge water
(water drained from washer) it (the discharge water) can be sucked back into the appliance and may damage the appliance or textiles.
Make sure that:
▯
There is no stopper in the sink drain.
▯
▯
The end of the hose does not touch the discharge water.
The sink drain is free flowing and not partially clogged.
Leveling the washer
Importance of leveling the washer
Your new washer uses high spin speeds to remove water at the end of the wash cycle. It is important that your washer is level and that all four washer feet press with equal pressure against the floor. This will help assure the quietest, most vibration-free use of your washer.
Follow these steps:
1.
Install the washer on a level and solid surface, preferably in a corner of a room.
2.
If the floor is uneven (or unlevel) adjust the washer feet as required to level the washer. Do not place anything under the washer feet to help level the washer.
3.
4.
5.
6.
Extend the washer feet no more than is necessary. The more the feet are extended, the more vibration the washer will experience. Start with the washer feet turned all the way in and adjust each foot as necessary.
Use a bubble level to check the top of the washer to make sure it is level side to side and front to rear.
Press down on each corner of the washer top to make sure the washer doesn’t “wobble“. There should be no
"give" or movement. All four washer feet should press equally against the floor. This is just as important as the washer being level to prevent vibration.
When the washer is level and does not wobble, lock the washer feet in place by tightening the locknuts against the washer bottom. Be sure to do this without changing the height of the foot (hold the foot while tightening the locknut).
Procedure for adjusting the washer feet:
Attach the drain hose securely to the wash basin.
NOTICE: In any multi-story installation, the washer should be installed on a drained floor to prevent water damage to rooms below in the event of a leak.
1.
2.
3.
After determining which washer feet need to be extended, have someone lift up on the washer slightly to take pressure off the foot to be adjusted.
Turn the grey plastic foot to extend it downward as far as necessary to raise the corner of the washer the correct amount to level the washer.
When the height of the foot is correct, use a 17 mm open end wrench to tighten the locknut against the washer bottom. The locknut should be tight against the bottom of the washer to lock the foot in place.
15
Electrical connection
9 WARNING
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment-grounding conductor may result in electric shock. Have the appliance checked by a qualified technician or licensed electrician if you are in doubt as to whether the washer has been properly grounded.
9 WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord or an adapter to connect the washing machine to the power supply.
9 WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of electrical shock:
▯
▯
▯
Only pull out the power cord by the plug end and never by the cable, as this could damage it.
Never touch or hold the plug end or power cord with wet hands.
Never unplug the plug end or power cord during operation.
Grounding Instructions
9 WARNING
ELECTRICAL SHOCK HAZARD
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord that has an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
▯
▯
▯
▯
Do not modify the plug provided with the appliance. If the plug will not fit into the outlet have a properly grounded outlet installed by a qualified electrician. Do not cut, remove or bypass the grounding prong on the washer power cord plug.
The washer power cord plug must be easily accessible when the washer is operating.
When unplugging or plugging in the washer power cord, grasp the plug end. Do not pull on the cable to unplug the washer.
The household electrical supply must be suitable for the voltage specification shown on the washer rating plate (located inside the washer door, immediately below the drum opening).
~ Purchase information; Page 4
See the table below for connection specfications and fuse/breaker requirements.
Volts
240
Hertz
60
Ampers
12
Watts
2.880 max.
▯
▯
▯
▯
▯
▯
The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a
Ground Fault Circuit Interrupter (GFCI) is recommended.
Protect the power cord from physical damage, such as being twisted, kinked, pinched, caught in a door, or walked upon.
If the power cord is damaged, it must be replaced by a qualified technician to avoid a fire/shock hazard.
Replacement power cords can be purchased through
Customer Service.
The washing machine must only be connected to an individual branch circuit via a socket which has been properly installed and grounded.
Make sure that:
- the power plug fits into the socket
- the wire size is sufficient
- the grounding system is properly installed
The power cord may be replaced by an electrican only. Replacement power cords can be purchased from Customer Service. To reduce the risk of fire or electrical shock, DO NOT use an extension cord or an adapter to connect the washing machine to the power supply. If a ground fault circuit breaker is to be used, only use the types marked with the following symbol: z . Only this symbol can guarantee compliance with all current regulations.
16
Transporting the washer
Before transporting the washer
1.
Disconnect the washer power cord from the wall outlet.
2.
Turn off the water supply to the washer.
3.
4.
Disconnect water supply lines from the tap.
Disconnect the drain hose from the drain location.
5.
Install the transport bolt assemblies as shown in the following images.
Remove the transport bolt hole covers
1.
2.
3.
Remove all four transport bolt hole covers.
Pull the tip of the arrow on the cover out slightly to disengage the locking tab.
Rotate the cover counterclockwise to remove. Repeat for all 4 transport bolt hole covers.
Insert the transport bolt assemblies
1.
2.
3.
Each assembly consists of a plastic bushing and a bolt that extends through the bushings. Unscrew the bolt until the threaded end is flush with the end of the plastic bushing.
Insert the transportation bolt and bushing assembly as shown. The metal housing slides around the bolt through the slot in the plastic bushing as the bushing is slid into place. The open part of the bushing slot should be facing the direction shown to allow the assembly to slide fully into place.
When the bolt is in place screw it in until the bolt threads engage the drum. Double check and ensure bolts are screwed into threaded holes and not into cracks or crevices. Repeat the process for all 4 transportation bolt assemblies before tightening any all the way. Complete tightening all 4 bolt assemblies until they are each snug in place.
17
Getting to know your appliance
Control panel
+ 3 ;
³ 4
Ĉ
1 2
3:
C
$
( Program Selector for selecting a cycle and on/off switch; turns in both directions.
0 Selectable temperature ranges
Cold, Warm, Hot, Extra Hot
8 Temperature , Finish in , Spin Speed
To change the default cycle settings.
Indicator lamp lights up if the setting is active.
@ Selectable Spin Speed ranges
No Spin, Low, Med, High
H Cycle status sequence
▯
Wash N
▯
▯
Rinse O
Spin 0
P 4 Digit Display for settings and information
▯
Finish time
▯ adjustable in 1h (hour) steps to 24 hours
Cycle duration e.g. 2:40 (hours:minutes)
X SpeedPerfect G , Prewash PW ,
Extra Rinse +1, +2
Additional program settings.
Indicator on = setting is active.
18
#
` Start/Pause A
▯ starts or pauses the selected cycle
▯
▯ lit steady - cycle running, can be paused blinking - Options can be changed; cycle can be started; door is locked (water may be hot); cycle is in Pause mode
Operating Instructions
9 WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the Important Safety Instructions and
Operating Instructions before operating this appliance.
Before doing any laundry with your washing machine
Check to make sure your washer has been installed properly by following the installation instructions in this manual.
~ Installation instructions; Page 10
Check the machine. Never connect the utilities (power or water) to or start a damaged machine! Contact customer service!
Check to be sure your household electrical system voltage and the voltage specifications on the washing machine rating plate correspond.
Check to be sure the washer hot and cold water supply taps are turned on.
Turning the washing machine on and off
The rotating Cycle Selector turns the washer on as wash cycles are selected and off when the selector is later turned to the vertical Off position.
Before loading your first load of laundry
Your new washing machine was tested before leaving the factory. This process involves running various wash cycles. As a result, a small amount of water may remain in the tub and drainage system. Run a Drum Clean cycle with no laundry to clean the system before your first load of laundry.
First add 1 to 2 tablespoons of detergent to the mainwash chamber II. Then run the Drum Clean cycle.
Wait for the cycle to finish.
Using the cycle selector to choose a wash cycle
NOTICE: If the child lock feature is activated, you must deactivate it before you can set a cycle.
Use the cycle selector to select the desired cycle. Turns in both directions.
The machine is switched on.
In the display field, the cycle duration for the selected cycle appears and the indicator lamps for the pre-set temperature and spin speed options light up.
Changing default cycle settings
You can use the default settings or change them to your desired settings.
Touch the appropriate button until the desired setting is displayed.
The settings or options are active when the related indicator is lit. There is no need for additional confirmation on your part. The settings or options are not retained after the appliance is switched off (all are set back to default automatically).
~ Program selection table; Page 25
~ Default Program and Option settings; Page 26
Selecting additional cycle settings
By selecting additional settings, you can adjust the washing process to better suit the items you are washing.
The settings can be selected and deselected depending on the cycle progress.
The indicator lamps of the buttons light up if the setting is active.
The settings are not retained after the appliance is switched off.
Loading the laundry
9 WARNING
To avoid risk of explosion! Laundry items that have been pretreated with any material containing solvents (e.g. stain remover, cleaner’s solvent) must be rinsed out thoroughly by hand before they are placed in the washing machine.
Loosen the laundry being loaded and mix small and large items
Unfold the sorted items and place them loosely in the drum. Mix small and large items to help them better distribute in the drum during the spin cycle.
Tip: Do not exceed the maximum load recommended for the type of wash. Overloading will cause poor wash results and will cause wrinkles.
19
Recommended Load Size
Recommended maximum load size can be found:
~ Standard features and helpful information; Page 7
B
C
D a 1/3 Load - woolens, delicates, silk b 1/2 Load - cotton, synthetic fabrics, or knitted textiles c Full Load - cotton and linen
Filling
9 WARNING
IRRITATION OF EYES/SKIN!
When opening the detergent drawer during operation, detergent or laundry care products may spray out.
Open the drawer carefully.
In case of contact with detergent or laundry care products, rinse the eyes or skin thoroughly.
In case of accidental ingestion, consult a doctor.
NOTICE: To prevent build up and possible clogging of water ways, dilute thick fabric softener or other laundry care products with water.
Pour the detergent and laundry care product into the appropriate chambers:
Tips
After loading, close the door carefully so as not to trap any items between the door and the rubber seal. The door should close easily and should not be forced to close.
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no foreign objects are in the drum.
Filling the detergent and additives compartments
NOTICE: Damage to the appliance
Detergent and laundry pre-treatment aids (e.g. spot remover, pre-wash sprays, etc.) can cause damage if they come into contact with the surfaces of the washer.
Do not let these substances touch the surfaces of the washer. If necessary, wipe off spray traces and other traces/drops immediately with a soft cloth.
Measuring
Measure out the detergent and laundry care products according to:
▯ the water hardness; consult your water utility company for details
▯
▯
▯ the manufacturer's instructions on the packaging quantity of laundry amount of soiling (heavy, normal, light)
Liquid detergent insert A
Pre-wash chamber I
Softener chamber i
Main-wash chamber II for liquid detergent
Detergent for pre-wash
Fabric softener, starch
Do not exceed max
Tips
Do not pour fabric softener directly into the wash load.
Fabric softener is automatically dispensed during the last rinse cycle.
Dilute concentrated or thick fabric softener or fabric conditioner with water (2/
3’s water) before pouring it into the dispenser (prevents blockage of overflow).
Detergent for main wash, water softener, spot remover,
NOTICE: Do not use Chlorine based or color safe bleaches as these could damage the washer. Detergents and/or solid bleaching agents based on Oxygen
(like Sodium Percarbonate) are safe to use.
20
1.
2.
3.
4.
Open the detergent dispenser tray.
Add detergent or additive.
Avoid overfilling the compartment to prevent early dispensing.
Close the detergent dispenser tray completely before starting the wash cycle.
Tip: DO NOT operate the washer without the detergent compartment in place and fully closed.
Liquid detergent insert
To measure liquid detergent:
1.
Pull out the detergent dispenser tray. Press down on the insert and remove the drawer completely.
2.
3.
Push the liquid detergent insert forward and down as shown.
Reinsert the tray into its compartment.
NOTICE: Do not use the liquid detergent insert with geltype detergents and powdered detergents or for cycles with pre-wash and selected "Finish in" time.
Starting the cycle
Touch the Start/Pause button. Indicator lamp lights up and the cycle starts.
NOTICE: If you want to protect the cycle against inadvertent adjustment, select the child lock.
During the cycle, the display field indicates the "Finish at" time and, after starting the washing cycle, the cycle duration and the symbols for the cycle progress.
Child lock
You can secure the washer against inadvertent changing of the set functions. To do this, activate the child lock after cycle start.
To Activate/Deactivate , touch and hold Temperature and
Finish in buttons for approximately 3 seconds. The symbol appears in the display.
D
▯
▯
D lit steady: The child lock is active.
D blinking: The child lock is active and the cycle selector has been adjusted. To prevent a cycle interruption, set the cycle selector back to the initial cycle. The symbol lights up again.
NOTICE: The child lock can remain activated until the next cycle start even after switching the machine off.
Then you must deactivate the child lock before cycle start and if necessary activate it again after cycle start.
1.
2.
Selecting a different cycle
If you have inadvertently started the wrong cycle, you can change this as follows:
3.
Touch Start/ Pause .
Select another cycle.
Touch Start /Pause. The new cycle starts from the beginning.
Pausing/Adding a garment to the cycle
Pausing the wash cycle can be useful for several purposes.
e.g. for soaking ~ Soaking; Page 26
Touch Start/Pause.
Pause.
A appears on the display. Wash load will soak in water until continued by touching Start/
For adding a garment after the cycle begins.
1.
2.
Touch Start/Pause .
Open door carefully and add or remove laundry item.
3.
4.
Note: You can do this as long as the Start/Pause indicator flashes and it is safe to do so.
Close door.
Touch Start/Pause .
The cycle continues.
NOTICE: If the cycle is paused but the door will not unlock it could be for safety reasons (high water level, water temperature or drum speed).
Cancel cycle
For cycles with a high temperature:
1.
2.
3.
Touch Start/Pause .
Cool the laundry off: Select Rinse .
Touch Start/Pause .
For cycles with a low temperature:
1.
Touch Start/Pause .
2.
3.
Select Drain .
Touch Start/Pause .
Cycle end
End appears in the display field and the Start/Pause button indicator lamp is off.
If the symbol Å appears in the display, the washer has detected too much foam and it automatically adds an additional rinse to remove the foam.
NOTICE: Use less detergent the next time you run the washer with the same load.
21
Removing laundry/switching the appliance off
1.
Open the front door of the washer and remove the laundry.
2.
3.
Turn the cycle selector to the Off position. Appliance is switched off.
Turn off the water tap.
NOTICES
▯
Do not leave any laundry in the drum. It can shrink or be discolored by the next laundry.
▯
▯
▯
▯
Remove any remaining items from the drum and rubber gasket.
Leave the front door and detergent drawer open so that any remaining water can dry.
Always wait for the end of the cycle; otherwise the appliance may still be locked. If locked, switch the appliance on and wait until it unlocks.
If at the end of the cycle the display is not lit up, the energy saving mode is active. To see display, Touch any button.
Signal
You can change the following settings:
▯ volume for button signals
▯ volume for indicator signals
To change these settings always activate adjustment mode first.
2II
Changing the volume
You can set the volume by touching the Finish in button with the program selector in one of the following positions:
▯
▯
Position 2: for indicator volume
Position 3: for button signals volume
0 = off, 1 = soft, 2 = mid, 3 = loud, 4 = very loud
Activate adjustment mode
1.
Select Cotton Normal on Position 1.
The appliance is on.
2.
Hold down Start/Pause and turn the Program Selector to the right (Position 2). Release Start/Pause button.
Adjustment mode is now activated and the default volume for indicator signals appears in the display.
Quit adjustment mode
Turn the Cycle Selector to Off position. The settings were saved.
22
Laundry
Preparing the laundry
NOTICE: Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine.
Therefore, note the following tips when preparing your laundry:
▯
▯
▯
▯
▯
Empty all pockets to ensure no loose debris (coins, keys, other hard objects) are placed in the washer drum.
Close any fasteners (such as zippers and hooks) that could cause laundry to catch or become entangled.
Remove any foreign objects or non-washable parts.
Turn trousers and knitted wear inside out prior to washing.
Place small items (such as socks and handkerchiefs) and underwired bras into a mesh bag prior to washing.
Sorting the Laundry
Sort laundry items according to color, degree of soiling and recommended wash temperature range.
Check the care labels on each laundry item prior to washing. Choose an appropriate wash cycle that does not exceed the temperature recommended.
Determining degree of soiling
▯
Light soiling
No visible soiling or stains, but may have absorbed some body odor. This could include light weight summer clothing such as T-shirts, shirts, or blouses worn for only one day. Also to freshen bed linen or guest towels.
▯
Normal soiling
Visible soiling and/or a few light stains. This could include clothing such as T-shirts, shirts, or blouses that have been sweated in or worn several times. Also tea towels, hand towels or bed linen used for up to one week. Net curtains (without nicotine stains) that have not been washed for up to a half year.
▯
Heavy soiling
Visible soiling and stains. This could include kitchen towels, fabric napkins, baby bibs, children’s outer clothing or football jerseys and shorts stained with grass and/or earth. Also could include working clothes such as overalls and jeans and other clothing worn for outside work and activities such as gardening, home and yard maintenance or worn during sports activities.
Identifying and treating stains
Oils and grease: normal body skin oil, cooking oils/fats, sauces, mineral oil, or wax (containing fat/oil). Treatment: scrape residue from fabric. Pretreat. Wash using hottest water safe for the fabric. For heavy stains, apply non-flammable dry cleaning fluid to back of stain, replacing towels under stain frequently. Rinse thoroughly and wash using hottest water safe for the fabric.
Beverages and juices: tea, coffee, red wine, fruit, vegetables. Treatment: Pretreat stain. Wash using cold water.
Wash white items separately from colored items.
Otherwise, white items may tend to become grey.
Observe laundry care labels
H[WUDKRW KRW ZDUP FROG
Proteins and carbohydrates: blood, egg, milk, starch. Treatment: Rinse immediately in cold water. If stain remains, soak in cold water with an enzyme prewash.
Soot, earth, sand (pigments), red clay
(such as soiling of tennis clothing). Brush off residue if present. Pretreat or soak with a laundry product containing enzymes.
23
Removing stains
▯
Remove/pretreat stains as soon as possible after they have occurred.
▯
▯
Dab with a soapy solution. Do not rub.
Select an appropriate wash cycle and wash the item.
Several washing cycles may be required in order to remove stubborn or dried-in stains.
Laundry detergents and additives
Adding the correct amount of HE detergent
9 WARNING
To avoid risk of poisoning, keep detergents and cleaning products out of the reach of children.
Avoid overuse of detergent.
Measure out the detergent according to:
▯
▯
▯
The amount of laundry.
The degree of soiling.
~ Sorting the Laundry; Page 23
The water hardness. This information can be obtained from your local water authority. Soft water requires less detergent.
Too much detergent
▯
Excessive foam will reduce washing agitation and cause poor washing and rinsing results.
▯
Not environmentally compatible (wastes detergent and is not good for the environment).
Too little detergent
▯
Laundry will not be washed clean.
▯
Eventually the laundry will take on a grey and hard appearance. Greyish-brown grease spots may stain the laundry, heating elements may begin to calcify.
The fabric care label is important for selecting the correct detergent, temperature and treatment of the laundry.
If desired you can visit the following sites for additional information on detergents and fabric care.
~ www.textileaffairs.com or www.cleanright.eu
▯
▯
▯
Standard detergent with optical brighteners
Suitable for white laundry made from linen or cotton
Program: Cottons / Cold - Extra hot
Detergent for colors without bleach or optical brighteners
Suitable for colored laundry made from linen or cotton
Program: Cottons / Cold - Hot
Detergent for colors/delicates without optical brighteners
Suitable for colored laundry made from easy-care and synthetic fabrics.
Program: Easy-Care / Cold - Hot
24
▯
▯
Detergent for delicates
Suitable for delicate, fine fabrics, silk or viscose
Program: Delicate/Silk / Cold - Hot
Detergent for woolens
Suitable for wool
Wool program: Cold - Warm
Saving energy and reduce detergent
For light and normal soiling, you can save energy (lower washing temperature) and detergent.
Saving
Reduced temperature and detergent quantity as per the recommended dosage
Temperature as per the care label and detergent quantity as per the recommended dosage for heavy soiling
Soiling/note
Light e.g.:
▯
▯
Light summer/sports clothing
(worn for a few hours)
T-shirts, shirts, blouses (worn for up to one day)
▯
Guest bed linen and hand towels (used for one day)
No visible dirt or stains. Clothing has taken on some body odor.
Normal e.g.:
▯
T-shirts, shirts, blouses (sweat soaked, worn a few times)
▯
Towels, bedding (used for up to one week)
Visible dirt or a few light stains.
Heavy
Dirt and/or stains clearly visible, e.g. tea towels, baby items, work clothing
NOTICE: When measuring the amount of all detergents/ additives/care products and cleaning agents, please always check the manufacturer's instructions and information.
Program selection table
Programs Max.
Load up to:
Selectable program settings, default settings (bold)
Temperature Spin speed
Cotton Normal full load Extra hot
Hot
High
Cotton
Light Soil
1/2 load
Warm
Cold
Extra hot
Hot
High
Med
Low
No spin
Towels
Allergen
Warm
Cold
1/2 load
Extra hot
Hot
Warm
Cold full load Extra hot
Hot
Warm
Cold
High
Med
Low
No spin
High
Med
Low
No spin
Jeans 1/2 load
Hot
Warm
Cold
High
Med
Low
No spin
Heavy Duty
Drum Clean full load Extra hot
Hot
Warm
Cold empty Extra hot
High
Med
Low
No spin
High
Type of laundry
Sturdy fabric, cotton or linen fabric that withstands very hot water
Half load or less of lightly soiled sturdy fabric, cotton or linen fabric that withstands very hot water.
Durable, cotton towels; especially soft towels
Sturdy fabric, cotton or linen fabric that withstands very hot water
Dark cotton textiles and dark easy-care textiles;
Wash textiles inside-out.
For heavily to lightly soiled
(white) cottons, household linens, work and play clothes.
Special cycle for cleaning the drum
Additional program settings;
Information
SpeedPerfect, Prewash, Extra
Rinse +1, +2
Prewash, Extra Rinse +1, +2
SpeedPerfect, Prewash, Extra
Rinse +1, +2
SpeedPerfect, Prewash, Extra
Rinse +1, +2
SpeedPerfect, Prewash, Extra
Rinse +1, +2
Prewash, Extra Rinse +1, +2
Drain
Hand Wash/
Wool
Rinse/
Spin
Quick 30
(approx. 30 minute cycle)
Delicates full load
1/3 load
Hot
Warm
Cold full load
1/2 load
1/3 load
Hot
Warm
Cold
Hot
Warm
Cold
Med
Low
No spin
High
Med
Low
No spin
High
Med
Low
No spin
Med
Low
No spin
Hand and machine washable wool/wool blend fabrics
Extra rinse with spin
Spin only with selectable speed
Especially gentle washing cycle to avoid shrinkage, long cycle pauses (clothing rests in suds and water)
Extra Rinse "+1" is lit indicating cycle with one rinse and a spin. Touch Extra Rinse button until no symbol is lit and cycle will be spin only (no rinse)
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics; suitable for lightly soiled laundry
For delicate, washable fabrics, e.g. made of cotton, satin, synthetic fibers or blended fabrics
(e.g. curtains) bulky items (e.g. comforters)
SpeedPerfect, Prewash, Extra
Rinse +1, +2
25
Programs Max.
Load up to:
Selectable program settings, default settings (bold)
Temperature Spin speed
Type of laundry
Perm Press
Light Soil
Perm Press
Heavy Soil
1/2 load
Hot
Warm
Cold
High
Med
Low
No spin
Cotton, linen synthetic or blended fabrics
Perm Press
Tips
Do not wash new multicolored laundry together with other laundry.
Additional program settings;
Information
SpeedPerfect, Prewash, Extra
Rinse +1, +2
The cycles are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load.
Rinse cycles use cold water only.
Starching
NOTICE: Laundry must not be treated with fabric softener.
Starching is possible in all wash programs if liquid starch is used. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities.
Salt may damage stainless steel. Always follow the dye manufacturer's instructions.
Do not use the washing machine to bleach clothes.
3.
4.
Soaking
1.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
2.
5.
Turn the program selector to Cotton Normal Cold program.
Touch Start/Pause .
After approximately. ten minutes, touch Start/Pause.
After the required soaking time, touch Start/Pause again to continue or change the program.
NOTICES
▯
Load laundry of the same color.
▯
No additional detergent is required; the soaking solution is used for washing.
Default Program and Option settings
At the factory, temperature and spin speed options, and cycle duration ("Finish in" time) are pre-set for all cycles.
After selection of the cycle, these values are displayed in the display field.
You can change the default settings as follows.
Changing the temperature range
Before and during the cycle, you can change the default temperature range depending on the cycle progress.
Press the appropriate button until the desired setting is displayed.
The maximum temperature range that can be set depends on the cycle selected.
No Spin : This option eliminates the final spin and the load remains saturated with the final rinse water. The pump is activated to remove all residual water.
~ Program selection table; Page 25
Finish in
The program end (Finished in) time can be set in one hour increments to a maximum of 24 h (hours). After selecting the desired washing program (at the dial) but before touching the Start button, touch the Finish in button until the desired time is displayed, e.g. 8 h, then touch the Start button to start the washer.
NOTICE: The cycle duration is included in the set Finish in time.
Changing the spin speed range
Before and during the cycle, you can change the spin speed range depending on the cycle progress.
Touch the appropriate button until the desired setting is displayed.
Here is an example of a 2hr:30min cycle time and an 8 h
Finish in time.
8 h is displayed (until the Energy-Saving mode activates) and counts down (approximately 5hr:30min) until the washing cycle begins (at 2hr:30min) then the cycle duration 2:30 is displayed and began. Total time approximately 8 hours.
26
Additional Program Option settings
Extra Rinse
+1, +2
This feature is helpful for locations with very soft water or to generally improve rinsing results. It allows up to 2 additional rinse cycles to be added to selected programs and will increase program time.
Prewash
PW
For heavily soiled washing. Pour 1/3 of normal detergent amount into pre-wash chamber I and remaining 2/3 into main wash chamber II.
SpeedPerfect
G
For washing in a shorter time with a washing result comparable to that of the standard program.
Note: Do not exceed the maximum load.
~ Program selection table; Page 25
Cleaning and maintenance
Your washer is designed to give you many years of service. Observe the following instructions to maintain and protect your washer and keep it in top operating condition.
9 WARNING
RISK OF ELECTRIC SHOCK HAZARD!
To avoid risk of electric shock always disconnect the washer from the power outlet prior to cleaning.
Never clean the washer with a pressure washer.
Small amounts of descaling agent can be used to remove white spots on the washer drum caused by lime or mineral deposits or small amounts of rust caused by metal objects left in the drum.
NOTICE: Descaling agents contain acids which may attack parts of the washing machine and may discolor the laundry.
Cleaning the detergent dispenser tray
If there is a buildup of residual detergent or additives, or if the softener compartment is not rinsed out well enough, it may be helpful to clean the dispenser.
Cleaning the housing and control panel
9 WARNING
RISK OF EXPLOSION!
To avoid risk of explosion never clean the washer with flammable solvents.
As required, you may clean the washer housing and control panel.
- use hot soapy water or a mild (non-abrasive) cleansing agent.
- Dry with a soft towel.
- Remove residue immediately.
- Do not use high pressure spray.
Cleaning the drum
Metallic debris left in the drum can produce rust spots on the drum. Never use steel wool to try to remove these.
Use a chlorine-free cleansing agent and follow the manufacturer’s instructions.
Descaling the washer
Provided that you use correct amounts of detergent with your wash loads, descaling is not necessary. If descaling the washer drum does become necessary, please follow the descaling product manufacturer’s instructions.
1.
2.
3.
4.
Open the detergent dispenser tray fully. Press down on the drawer catch (1) and pull the tray (2) from the washer housing.
Remove the insert (3) by grasping it and pulling it upwards from the detergent dispenser tray.
Clean the insert and the detergent dispenser tray by holding it under warm running water. Lightly wipe away any remaining detergent residue.
Attach the insert and slide the detergent dispenser tray back into place and close the tray securely.
Tip: Do not operate the washer without the detergent dispenser tray in place. Always keep the tray completely closed.
27
Cleaning the water inlet strainers
If the washer water supply slows or stops completely, the water inlet strainer may be blocked. Cleaning is recommended every 6 months in any event to reduce chances of valve blockage in areas using hard water.
1.
2.
Release the water under pressure in the supply hoses
Normal water pressure in your home will cause some water to leak when you remove the water supply hose from the back of the washer. You can minimize this by first de-pressurizing the hoses.
3.
4.
Turn off the water tap.
Turn the cycle selector to any wash cycle (not to Drain or Spin).
Touch Start/Pause and allow 30 seconds to pass.
Turn the cycle selector to the Off position.
This should reduce the water pressure on the water supply hose.
Clean the strainers at the water tap end of the hose
1.
2.
3.
Remove the hose from the tap.
Rinse the strainer under running water. Look at the strainer to see if any visible debris is still present.
Rinse again if necessary to remove the debris.
Reconnect the hose to the tap.
Clean the strainers at the washer end of the hose
3.
4.
1.
2.
Remove the hose from the inlet on the back of the washer.
Using narrow pliers, grasp and pull the strainer from the inlet port.
Rinse the strainer under running water.
Reconnect the hose to the back of the washer and turn on the water tap. Check to see if water flows by starting a warm water wash cycle.
NOTICE: Check for leaks to be sure the rubber washers are seated at both ends of the water supply hose and the connections are properly tightened.
Cleaning the drain pump
9 WARNING
RISK OF SCALDING
Risk of hot water injury to skin!
Allow the water to cool down prior to actuating the emergency door lock release.
You are responsible for ensuring all safety precautions are followed when draining water from washer and/or manually opening the washer door.
It may be necessary to clean the washer drain pump if the washer fails to drain (sound of water being pumped from the washer cannot be heard when the washer should be draining and other nearby drains, such as a sink, are draining properly).
The washer pump can become blocked by loose debris
(a good reason to check the drum and remove any visible debris after each load.) Fabrics that give off large amounts of fluff may also cause blockage.
To access the washer drain pump, the service cover must first be removed (see steps below). With the service cover removed, proceed as follows:
28
1.
2.
If the washer has not been drained, try to drain it now.
Turn the program selector to the Drain and touch the
Start/Pause button. Wait a few moments to let the cycle drain the water from the drum. If the pump is totally blocked, the water will be unable to drain and the cycle will end.
Shut off the tap so that no more water flows in and has to be drained.
Switch the appliance off. Unplug the power plug.
3.
Open and remove the service cover.
6.
7.
Turn the pump cover counterclockwise to remove it. A small amount of residual water may flow out when the cover is removed.
Clean the interior of the pump housing, removing any debris or foreign objects. Check to be sure the impeller wheel at the back of the pump housing can now turn freely.
Remove any lint, debris or detergent residue from the threads of the pump cover and the pump cover housing.
Replace the pump cover by screwing tightly into position. Handle must be vertical.
Reinstall the protective film over the pump access using both screws.
4.
Loosen the screws and remove the protective film.
)
5.
Use the pull-out drain hose located in the pump access opening to drain the remaining water into a suitable container (up to 5.3 U.S. gallons/20 liters of water may be drained). Pull the sealing cap from the hose and lay the hose over the side of the container and allow the water to finish draining from the drum.
When finished, replace the sealing cap into the end of the hose and restore the hose to its storage location.
8.
Snap the service cover in place at the hinges and close it.Wipe up any spilled water.
NOTICE: In order to prevent detergent from flowing unused into the drain during the next wash cycles: pour
0.26 U.S. gallons/1 liter water into the chamber II .
Turn the cycle selector to the Drain and touch the Start/
Pause button.
29
Troubleshooting
Emergency door lock release
In the event of a power interruption the program will continue running when the power supply has been restored.
If the washer door must be opened and the normal door unlock procedures do not work, the emergency door lock release rod can be actuated to open the door.
9 WARNING
RISK OF SCALDING
To avoid risk of scalding, allow water to cool down prior to activating the emergency door lock release.
The drum may be full of hot water which could cause burn injury.
9 WARNING
RISK OF INJURY
You may injure your hands if you reach into the drum while it is turning.
Do not reach into the drum when it is turning. Wait until the drum has stopped turning.
9 CAUTION
WATER DAMAGE AND BURN INJURY
Any escaping water may cause water damage and burns.
Do not open the washing machine door if water can be seen through the glass.
1.
2.
3.
4.
5.
6.
Turn the washer off by rotating the cycle selector to the
Off position. Any running program will then be cancelled. Disconnect the mains plug.
Allow the water in the drum to cool off.
Allow the washer drum to come to a stand still (no longer spinning).
Before opening the washer door, perform the drain procedure included in the pump maintenance section.
~ Cleaning the drain pump; Page 28
Loosen screws and remove the protective foil.
The washing machine door can then be opened.
Pull the emergency release downwards with a tool and release.
7.
The door can now be opened.
General Troubleshooting
If you encounter a problem, consider the suggestions and instructions below before you call customer service.
9 WARNING
ELECTRIC SHOCK HAZARD
To avoid risk of electric shock, repairs should be carried out by an authorized technician.
If repairs are necessary and you cannot eliminate the fault with the aid of the table below, follow these steps:
1.
2.
Turn the cycle selector to Off .
Disconnect the washer from the power outlet.
3.
4.
Turn off the water taps.
Call Customer Service.
NOTICE: The troubleshooting items listed below can help you resolve minor issues with your washer quickly and without the necessity of waiting for a service call.
Service calls for issues that could have been solved by using this table may not be covered under the warranty. Please rule out any of these issues before calling customer service.
30
Determing the Problem
Problem
Washer door cannot be opened.
Door still cannot be opened, even after turning the washer Off and back on again.
Wash cycle time is increased.
Cycle does not start -
Start/Pause flashes.
Possible cause(s) Solution(s)
Child lock is activated.
A power failure occured.
Deactivated Child lock (touch and hold Temperature and Finish in for approximately 3 seconds).
If a cycle is interrupted by a power failure, it will resume when the power is restored.
Wait until the cycle ends.
Cycle is running, or water level is too high and/or too hot.
Electric power cord has become loose or unplugged.
Program selector turned to Off before end of cycle.
Emergency door lock released is activated.
Child lock is activated
Make sure the electric cord is securely plugged in.
Turn the program selector to a cycle.
~ Emergency door lock release; Page 30
Deactivated Child lock (touch and hold Temperature and Finish in for approximately 3 seconds).
Door is locked for safety reasons
(high water level, temperature of water hot, or high drum speed
(drum is turning).
Your washer utilizes sensors to monitor certain characteristics of the wash load. Increases in wash cycle time could be due to:
Excess suds.
Solutions are based on the specific reason the wash time has been extended.
The automatic unbalanced load detection system spins the laundry several times to ensure even distribution.
Use less detergent.
Always load the washer with a mixture of large and small wash items (easier to distribute in the drum).
Start/Pause button not touched / selected?
Touch the Start/Pause button to start the cycle.
Washer door is not closed properly. Check if laundry is caught in the door. Close the door until a click is heard, the cycle should start.
Cycle ending time has been selected and activated.
Wash cycle will begin at proper time to complete at the selected finish time.
Cycle does not start -
Finish in-Time is displayed.
Cycle does not start -
D symbol flashes.
Detergent residue remains in the detergent dispenser.
Water does not appear to be coming into the washer, or detergent is not washed away.
Water cannot be seen in the drum.
Child lock is activated.
Dry detergent may have been damp or lumpy.
Excess liquid detergent may have been added.
Use the dosing cup for liquid detergent when dosing powder detergent. Powder detergent may have been damp or lumpy.
Start/Pause selected?
Water taps not turned on.
Supply hose kinked or pinched
(reduce flow).
Water supply hose strainers clogged.
Water pressure too low.
The water level in your high efficiencey front load washer is below the visible part of the drum, this is normal.
Deactivate Child lock (touch and hold Temperature and Finish in for approximately 3 seconds).
Clean and dry the detergent dispenser.
See Adding the correct amount of HE detergent to determine proper detergent usage.
Clean and dry the detergent dispenser.
Select Start/Pause .
Turn on water taps.
Eliminate the cause.
Clean the water inlet strainers.
Eliminate the cause.
No action needed.
31
Problem
Water has not drained completely.
Water is coming out from underneath the washer.
Possible cause(s) Solution(s)
Suds may be excessive (usually due to too much detergent or non-
HE detergent being used).
Water supply hose is leaking: is not screwed on tight at both ends, or rubber washer not placed in hose.
Drain hose is leaking.
Use less detergent for future loads. Be sure to use only high efficiency HE-detergents.
Pump is blocked.
Check and clean the drain pump, water drain hose and/or the drain pipe.
Drain hose or drain pipe is blocked. Clean drainage pipe and/or drainage hose.
Eliminate the cause: tighten the hose (by hand at the washer end), check for rubber washer in place.
Too much detergent was used, or a non-HE detergent was used; pump was not able to pump out the increased suds.
Check the drain hose, be sure that it is on the washer securely with the clamp in place; may need to replace the drain hose if leaking continues.
Immediate fix: mix 1 tablespoon of fabric softener with
1/2 liter (1 pint) of water and pour this mixture into the detergent compartment (not with waterproof fabrics).
To prevent: use less detergent for future wash loads.
Foam comes out of the detergent dispenser drawer.
The cyle status sequence Wash flashes in the display.
Repeated spinning.
No spin took place
(laundry is still wet).
The Unbalanced Load Detection system is attempting to balance the load through repeated spins.
Load size too small.
Large items may have become entangled in the drum and could not be distributed by the Unbalanced Load Detection system; spin cycle therefore canceled for safety reasons.
Excessive suds: too much detergent was used, or a non-HE detergent was used.
Detergent residue on the laundry.
System shakes or shudders when spin speed increases.
No Spin was selected
Some phosphate free detergents contain water insoluble ingredients that may appear as light spots on the laundry.
The washer drum suspension system shifts during spinning as the speed increases. This may result in a slight shaking of the washer during the spin speed transition.
To prevent: always load the washer with a mixture of large and small wash items (easier to distribute in the drum).
Add more laundry.
To prevent: always load the washer with a mixture of large and small wash items (easier to distribute in the drum).
Immediate fix: mix 1 tablespoon of fabric softener with
1/2 liter (1 pint) of water and pour this mixture into the detergent compartment (not with waterproof fabrics).
To prevent: use less detergent for future wash loads.
Select a spin speed setting (Low, Med or High)
Brush off when laundry is dry or execute the program Rinse .
Mix small and large laundry items together in the load to minimize this effect. Check to be sure the washer is level and all four feet press equally against the floor.
Transport bolts removed?
~ Remove the transport bolts; Page 13
32
Error messages
Display
è flashes r
Fault
Door not closed properly.
E:93
E:32
(alternating display with
END when program is finished)
E:18
Cold water pressure too low.
Hot water tap not turned on.
Supply hose for hot water kinked or trapped.
Hot water pressure too low.
Supply hose for hot water not connected correctly.
Not a fault – the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed.
Too much detergent used or non-
HE detergent used.
Others
Cold water tap not turned on.
Supply hose for cold water kinked or pinched closed.
Strainer in water supply hose clogged.
Pump is blocked (obstructed).
Measure
Check to be sure no laundry is caught in the washer door. Close the door securely.
Turn on the cold water tap.
Eliminate the cause, replace the hose if damaged.
Clean the water inlet strainer.
~ Cleaning the water inlet strainers; Page 28
Eliminate the cause.
Turn on the hot water tap.
Eliminate the cause, replace the hose if damaged.
Eliminate the cause.
Connect both supply hoses (hot and cold water) for hot water appliances.
Distribute small and large items of laundry evenly in the drum. If necessary, start an additional spin program.
Use less detergent for future loads. Only use HE detergents.
~ Your washing machine is intended for; Page 5
Clean the washer drain hose and/or the drain pipe.
May need to perform pump maintenance to clear blockage.
~ Cleaning the drain pump; Page 28
Turn off machine, wait 5 seconds and turn on again. If the display shows again, call customer service.
Customer service
Contact the Customer Service department if your appliance needs repair. Our representatives will be happy to provide details for an authorized service provider close to you.
E-Nr.
and FD (serial) number:
When you contact Customer Service, please have the E-
Nr.
(model number) and the FD (serial) number for your appliance available. You can find the identification plate with these numbers on this information on inside of the appliance door or on the back of the appliance.
Questions? Please contact us. We look forward to hearing from you!
ZZZERVFKKRPHFRP
0DLQ6WUHHW6XLWH
,UYLQH&$
33
STATEMENT OF LIMITED PRODUCT WARRANTY
What this Warranty Covers & Who it Applies to
The limited warranty provided by BSH Home Appliances
("Bosch") in this Statement of Limited Product Warranty applies only to the Bosch appliance sold to you, the first using purchaser, provided that the Product was purchased:
▯
For your normal, household (non-commercial) use, and has in fact at all times only been used for normal household purposes.
▯
New at retail (not a display, "as is", or previously returned model), and not for resale, or commercial use.
▯
Within the United States or Canada, and has at all times remained within the country of original purchase.
The warranties stated herein apply only to the first purchaser of the Product and are not transferable. Please make sure to return your registration card; while not necessary to effectuate warranty coverage, it is the best way for Bosch to notify you in the unlikely event of a safety notice or product recall.
Limitation for Third Party Accessories and Water
Supply Hoses: Third party accessories, including water supply hoses other than those shipped with your Bosch washer, and any consequential damages resulting therefrom, are not covered by this warranty. This limitation expressly includes the implied warranties of merchantability and fitness for a particular purpose, which are also expressly excluded with respect to third party accessories, including water supply hoses other than those shipped with your Bosch washer. Use of third party accessories, including water supply hoses other than those shipped with your Bosch washer, does not void this warranty on any other part, and all other provisions of this warranty remain in effect.
How Long the Warranty Lasts: Bosch warrants that the
Product is free from defects in materials and workmanship for a period of three hundred sixty-five
(365) days from the date of purchase. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever. This Product is also warranted to be free from cosmetic defects in material and workmanship (such as scratches of stainless steel, paint/ porcelain blemishes, chips, dents, or other damage to the finish) of the Product, for a period of thirty (30) days from the date of purchase or closing date for new construction. This cosmetic warranty excludes slight color variations due to inherent differences in painted and porcelain parts, as well as differences caused by kitchen lighting, product location, or other similar factors.
This cosmetic warranty specifically excludes any display, floor, "As Is", or "B" stock appliances.
Repair/Replace as Your Exclusive Remedy: During this warranty period, Bosch or one of its authorized service providers will repair your Product without charge to you
(subject to certain limitations stated herein) if your
Product proves to have been manufactured with a defect in materials or workmanship. If reasonable attempts to repair the Product have been made without success, then Bosch will replace your Product (upgraded models may be available to you, in Bosch's sole discretion, for an additional charge). All removed parts and components shall become the property of Bosch at its sole option. All replaced and/or repaired parts shall assume the identity of the original part for purposes of this warranty and this warranty shall not be extended with respect to such parts. Bosch's sole liability and responsibility hereunder is to repair manufacturerdefective Product only, using a Bosch authorized service provider during normal business hours. For safety and property damage concerns, Bosch highly recommends that you do not attempt to repair the Product yourself, or use an un-authorized servicer; Bosch will have no responsibility or liability for repairs or work performed by a non-authorized servicer. If you choose to have someone other than an authorized service provider work on your Product, THIS WARRANTY WILL
AUTOMATICALLY BECOME NULL AND VOID. Authorized service providers are those persons or companies that have been specially trained on Bosch products, and who possess, in Bosch's opinion, a superior reputation for customer service and technical ability (note that they are independent entities and are not agents, partners, affiliates or representatives of Bosch). Notwithstanding the foregoing, Bosch will not incur any liability, or have responsibility, for the Product if it is located in a remote area (more than 100 miles from an authorized service provider) or is in a reasonably inaccessible, hazardous, threatening, or treacherous locale, surroundings, or environment; in any such event, if you request, Bosch would still pay for labor and parts and ship the parts to the nearest authorized service provider, but you would still be fully liable and responsible for any travel time or other special charges by the service company, assuming they agree to make the service call.
SCOPE OF EXTENDED LIMITED WARRANTY
Bosch will repair or replace, free of charge any printed circuit boards, drive motor or component part of the motor that proves defective under conditions of normal home use during the first seven hundred thirty (730) days from the date of purchase, labor charges excluded.
Out of Warranty Product: Bosch is under no obligation, by law or otherwise, to provide you with any concessions, including repairs, pro-rates, or Product replacement, once this warranty has expired.
34
Warranty Exclusions: The warranty coverage described herein excludes all defects or damage that are not the direct fault of Bosch, including without limitation, one or more of the following:
Use of the Product in anything other than its normal, customary and intended manner (including without limitation, any form of commercial use, use or storage of an indoor product outdoors, use of the Product in conjunction with air or water-going vessels).
▯
▯
Any party's willful misconduct, negligence, misuse, abuse, accidents, neglect, improper operation, failure to maintain, improper or negligent installation, tampering, failure to follow operating instructions, mishandling, unauthorized service (including self performed "fixing" or exploration of the appliance's internal workings).
Adjustment, alteration or modification of any kind.
▯
▯
▯
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes, regulations, or laws, including failure to install the product in strict conformity with local fire and building codes and regulations.
Ordinary wear and tear, spills of food, liquid, grease accumulations, or other substances that accumulate on, in, or around the Product.
Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
In no event shall Bosch have any liability or responsibility whatsoever for damage to surrounding property, including cabinetry, floors, ceilings, and other structures or objects around the Product. Also excluded from this warranty are Products on which the serial numbers have been altered, defaced, or removed; service visits to teach you how to use the Product, or visits where there is nothing wrong with the Product; correction of installation problems (you are solely responsible for any structure and setting for the Product, including all electrical, plumbing or other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors, shelving, etc.); and resetting of breakers or fuses. TO THE EXTENT
ALLOWED BY LAW, THIS WARRANTY SETS OUT YOUR
EXCLUSIVE REMEDIES WITH RESPECT TO PRODUCT,
WHETHER THE CLAIM ARISES IN CONTRACT OR TORT
(INCLUDING STRICT LIABILITY, OR NEGLIGENCE) OR
OTHERWISE. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, WHETHER EXPRESS OR
IMPLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER
FOR MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR OTHERWISE, SHALL BE
EFFECTIVE ONLY FOR THE PERIOD THAT THIS
EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN NO
EVENT WILL THE MANUFACTURER BE LIABLE FOR
CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT,
"BUSINESS LOSS", AND/OR PUNITIVE DAMAGES,
LOSSES, OR EXPENSES, INCLUDING WITHOUT
LIMITATION TIME AWAY FROM WORK, HOTELS AND/
OR RESTAURANT MEALS, REMODELLING EXPENSES
IN EXCESS OF DIRECT DAMAGES WHICH ARE
DEFINITIVELY CAUSED EXCLUSIVELY BY BOSCH, OR
OTHERWISE. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, AND SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.No attempt to alter, modify or amend this warranty shall be effective unless authorized in writing by an officer of BSH.
How to Obtain Warranty Service: To obtain warranty service for your Product, you should contact the nearest
Bosch Customer Service Department.
BSH Home Appliances Corporation - 1901 Main Street,
Suite 600, Irvine, CA 92614 / 800-944-2904
35
*9001002399*
9001002399
9502
1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904 www.bosch-home.com • © 2012 BSH Home Appliances
Public link updated
The public link to your chat has been updated.
Advertisement