Schluter SNS1D5TSC, KBSB410TA, SES1D5TSBG, SNS1D6TSC, KBSB290970RA, SES1D6MGS, SES3D5MGS, SES3D6TSSG, SES3D5MBW, SWS1D6MBW User manual

Schluter SNS1D5TSC, KBSB410TA, SES1D5TSBG, SNS1D6TSC, KBSB290970RA, SES1D6MGS, SES3D5MGS, SES3D6TSSG, SES3D5MBW, SWS1D6MBW User manual
S HOWE R SY STE M
INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE
INTEGRATED BONDED WATERPROOFING SYSTEM FOR TILED SHOWERS
The Schluter®-Shower System is an
integrated family of products that together
form a fully bonded, watertight assembly
for tiled showers. Unlike shower pan
liners in conventional assemblies, bonded
waterproof membranes, such as Schluter®KERDI, bond directly to the mortar bed and
protect it from becoming saturated with
regular use. In addition, the KERDI membrane
or Schluter®-KERDI-BOARD waterproof
building panel protect wall cavities from
vapor penetration. The Schluter®-KERDIDRAIN, Schluter®-KERDI-DRAIN-H and
Schluter®-KERDI-LINE floor drains provide a
simple and secure connection to the KERDI
membrane at the top of the assembly.
Other components include the Schluter®KERDI-SEAL-PS/-MV prefabricated seals
and the Schluter®-KERDI-FIX adhesive/
sealant, used to treat protrusions through
the membrane, and the Schluter®-KERDISHOWER and Schluter®-KERDI-BOARD
prefabricated substrates, which can reduce
weight and installation time. The integrated
Schluter®-Shower System eliminates leaks,
reduces the potential for efflorescence and
mold growth in the system, and dramatically
reduces total installation time to ensure
success and make shower installation easier
than ever.
17.1 Schluter®-SHELF-E/-W/-N
8.1 Schluter®-KERDI
12.1 Schluter®-KERDI-BOARD
8.2 Schluter®-KERDI-DRAIN
8.7 Schluter®-KERDI-LINE
8.3 Schluter®-KERDI-SHOWER-T/-TS/-TT
8.8 Schluter®-KERDI-SHOWER-LT/-LTS
8.3 Schluter® -KERDI-SHOWER
-SR/-CB
12.1 Schluter®-KERDI-BOARD
-SB/-SC/-SN
8.1 Schluter®-KERDI-BAND/
-KERECK/-KERS
8.1 Schluter®-KERDI-SEAL-PS/-MV
14.1 Schluter®-SHOWERPROFILE-S/-R
14.1 Schluter®-SHOWERPROFILE
-WS/-WSK
SHOWER SYSTEM
Prefabricated Shower Substrates
8.3 Schluter®-KERDI-SHOWER-T/-TS/-TT/-LT/-LTS
Property
Density
Compressive Strength1
Maximum Service Temperature
1
Method
Value
ASTM D3575
ASTM D1621
-
3.75 lb/ft3 (60 Kg/m3)
80 psi (552 kPa)
175 °F (79 °C)
Compressive strength measured at 10% deflection of foam
8.3 Schluter®-KERDI-SHOWER-SR
8.3 Schluter -KERDI-SHOWER
-T/-TS/-TT
Property
Density
Maximum Service Temperature
8.3 Schluter®-KERDI-SHOWER
-SR/-CB
Application and Function
®
8.8 Schluter®-KERDI-SHOWER-LT/-LTS
12.1 Schluter® -KERDI-BOARD
-SB/-SC
12.1 Schluter®-KERDI-BOARD-SN
Method
8.3 Schluter®-KERDI-SHOWER-T/-TS/-TT
are sloped shower trays with integrated KERDI
waterproofing. The trays are made of lightweight,
expanded polystyrene for constructing mortarfree shower bases. Each of these shower trays
are designed to integrate with Schluter®-KERDIDRAIN. The trays include a KERDI collar for
completing the waterproofing to the Schluter®KERDI-DRAIN bonding flange.
KERDI-SHOWER-T is a standard tray with center
drain placement available in 38" x 60" (97 x 152
cm), 48" x 60" (122 x 152 cm), 48" x 72" (122
x 183 cm), 60" x 60" (152 x 152 cm), and 72" x
72" (183 x 183 cm) sizes.
KERDI-SHOWER-TS is the standard tray with
off-center drain placement available in a 38" x
60" (97 x 152 cm) size.
KERDI-SHOWER-TT features a thin perimeter
height that simplifies construction of curbless
showers. The tray is available in 32" x 38"
(81 x 97 cm), 36" x 48" (91 x 122 cm),
36" x 36" (91 x 91 cm), 38" x 38" (97 x 97 cm),
and 48" x 48" (122 x 122 cm) and neo-angle 38"
x 38" (97 x 97 cm) sizes.
8.3 Schluter®-KERDI-SHOWER-SR is a ramp
designed to facilitate the construction of access
ramps for tiled showers. Ramp dimensions are
48" x 15-7/8" x 1-1/2" (122 x 40 x 3.8 cm).
Schluter®-KERDI-BOARD-KIT
Schluter® prefabricated shower substrates
provide an alternative to shower bases
constructed of mortar and other shower elements
constructed of framing and solid backing. The
shower tray, curb, ramp, bench, and niche are
especially useful in large-scale, repetitive jobs,
such as hotels, apartments, and condominiums
for the significant time savings that can be
realized.
2
Value
ASTM D3575
-
8.8 Schluter ®-KERDI-SHOWER-LT/-LTS
are polystyrene sloped trays with integrated
Schluter®-KERDI waterproofing. Each of these
prefabricated shower trays is designed to
integrate with the Schluter®-KERDI-LINE.
KERDI-SHOWER-LT allows for the installation of
a center drain and is available in 39" x 39" (100
x 100 cm), 48" x 48" (122 x 122 cm) and 55" x
55" (140 x 140 cm) sizes.
KERDI-SHOWER-LTS accommodates the
installation of the drain along the perimeter of
the shower and is available in 39" x 39" (100 x
100 cm), 48" x 48" (122 x 122 cm) and 55" x 55"
(140 x 140 cm), 36" x 55" (91 x 140 cm), 36" x
72" (91 x 183 cm), 38" x 76" (97 x 193 cm) and
76" x 38" (193 x 97 cm) sizes.
4.0 lb/ft3 (64 Kg/m3)
175 °F (79 °C)
Schluter®-KERDI-SHOWER-CB is a height
compensation board made of lightweight
expanded polystyrene used to accommodate the
drain body and waste pipe height, when installing
the Schluter®-KERDI-DRAIN-H in conjunction
with the Schluter®-KERDI-SHOWER-T/-TS/-TT
shower trays. The compensation board can
easily be cut to size to fit around the drain and
waste pipe, and multiple boards can be used to
fit the size and shape of the shower.
12.1 Schluter®-KERDI-BOARD-SB/-SC are
prefabricated substrates, made of Schluter®KERDI-BOARD, which integrate with the
Schluter®-Shower System. The substrates
are waterproof and ready for tile, leaving only
sealing of joints and corners to complete
waterproofing. The KERDI-BOARD-SB shower
bench is available in triangular and rectangular
configurations in the followings sizes (width x
depth x height). The triangular benches are 16" x
16" x 20" (41 x 41 x 51 cm) and 24" x 24" x 20"
(61 x 61 x 51 cm). Rectangular benches are 38"
x 11-1/2" x 20" (97 x 29 x 51 cm) and 48" x 16"
x 20" (122 x 41 x 51 cm). The KERDI-BOARDSC shower curb can be used in conjunction with
any shower base. Curb dimensions are 38" x 6"
x 4-1/2" (97 x 15 x 11.5 cm), 48" x 6" x 4-1/2"
(122 x 15 x 11.5 cm), and 60" x 6" x 4-1/2" (152
x 15 x 11.5 cm).
12.1 Schluter®-KERDI-BOARD-SN is a
prefabricated shower niche made of KERDIBOARD that can be installed in both KERDI and
KERDI-BOARD wall assemblies. The shower
niche features a 1/2" (12.5 mm) -thick by 2"
(50 mm) -wide integrated bonding flange and is
available in 12" x 6" (30 x 15 cm), 12" x 12" (30 x
30 cm), 12" x 20" (30 x 51 cm), and 12" x 28" (30 x
71 cm) sizes.
Schluter®-KERDI-BOARD-KIT combines all
of the necessary components to waterproof
the walls of your bathtub and acrylic shower
base using waterproof building panels. The kit
includes ½" x 48" x 38" (1.25 cm x 122 cm x
97 cm) KERDI-BOARD waterproofing panels,
KERDI-BAND, pipe and mixing valve seals,
screws and washers, plus 290 ml of KERDI-FIX
sealant in bright white. The KERDI-BOARD-KIT
provides enough KERDI-BOARD to cover up to
101 ft² (9.4 m²) of wall area.
SHOWER SYSTEM
Material Properties and
Areas of Application
SHOWER-T/-TS/-TT/-LT/-LTS/-SR
prefabricated substrates are manufactured
using lightweight expanded polystyrene. The
products require no special disposal and can
be recycled. No CFCs or HCFCs are present
in either the products or in the manufacturing
process. The polystyrene foam trays have a
density of 3.75 lb/ft3 (60 kg/m3) and the shower
ramp, 4.0 lbs/ft3, all with a 48 psi (331 kPa)
compressive strength at 10% deformation. It
is serviceable in temperatures up to 175ºF
(79ºC). The expanded polystyrene used to
manufacture KERDI-SHOWER-T/-TS/-TT/-LT/LTS/-SR is treated with a flame retarding agent.
Expanded polystyrene should not be exposed to
hydrocarbons, esters, amines, and aldehydes.
All will deteriorate foam. Exposure to ultraviolet
rays (sunlight) for long periods of time will result
in partial degradation (dusting) at the surface.
KERDI-BOARD-SB/-SC prefabricated substrates
are manufactured using KERDI-BOARD, made
from extruded polystyrene foam, with a cementfree reinforcement layer laminated to both sides
with an anchoring fleece webbing. The surface
features printed gridlines consisting of 3/8" x 3/8"
(10 x 10 mm) squares for precise cutting. KERDIBOARD is waterproof and vapor-retardant and
can withstand all chemical stresses that typically
occur in conjunction with ceramic tile coverings.
KERDI-BOARD will not warp, rot, or decay. It is
serviceable in temperatures up to 158°F (70 °C).
Waterproofing Membrane
8.1 Schluter®-KERDI
Since traditional shower pan liners are placed
below the mortar setting bed in conventional
assemblies, moisture is allowed to saturate
the mortar bed. This can increase the risk
of leakage, cause efflorescence, and foster
mold growth. Bonded waterproof membranes,
such as KERDI, are set on top of the mortar
bed and protect it from becoming saturated,
thus eliminating the problems associated with
traditional systems.
Application and Function
8.1 Schluter®-KERDI is a pliable, sheet-applied,
bonded waterproof membrane and vapor
retarder with limited crack-bridging capabilities.
It is made of soft polyethylene, which is covered
on both sides with a special fleece webbing to
anchor the membrane in the thin-set mortar.
Tiles can be installed directly on the KERDI
membrane using the thin-bed method. Other
3
trowel-applied covering materials, such as
plaster, can also be used. Schluter®-KERDI-DS
is a bonded waterproof membrane and vapor
retarder with very low water vapor permeance
for use in continuous use steam rooms and
similar applications.
Various KERDI waterproofing accessories are
available. Preformed, seamless corners include
the following. KERDI-KERECK-F are used to seal
90° inside and outside corners. KERDI-KERS-B
are used to seal 135° corners at triangular
shower benches and neo-angle shower curbs.
KERDI-KERS are used to seal floor/wall/
shower base connections in curbless shower
applications where the KERDI-LINE linear drain
is installed adjacent to the wall. KERDI-SEALPS/-MV are prefabricated sections of KERDI
with overmolded rubber gaskets that are used
to seal pipe protrusions through the KERDI
waterproofing membrane (e.g., at showerheads
and tub spouts) and protect moisture-sensitive
backing panels at the mixing valve. Use KERDIBAND, in widths of 5" (12.5 cm), 7-1/4" (18.5
cm), or 10" (25 cm), to seal butt joints or corner
joints. KERDI-FLEX, in 5" (12.5 cm) or 10" (25
cm) widths, is used to seal expansion joints or
flexible edge joints.
KERDI and KERDI-DS meet the American
National Standard for Load Bearing, Bonded,
Waterproof Membranes for Thin- Set Ceramic
Tile and Dimension Stone Installations
(ANSI A118.10). The membranes are listed
by cUPC® and evaluated by ICC-ES (Report
Nos. ESR-2467 and PMG-1204). For
copies of these documents, please contact
Schluter®- Systems at 800-472-4588 (USA) or
800- 667-8746 (Canada) or by e-mail at [email protected]
schluter.com. Links to the documents can also
be accessed at www.schluter.com.
KERDI and KERDI-DS have been evaluated
according to the "Standard Method for the
Testing and Evaluation of Volatile Organic
Chemical Emissions from Indoor Sources Using
Environmental Chambers, Version 1.1" for
California Specification 01350 and found to
comply with the VOC requirements. California
Specification 01350 is referenced by various
green building standards and rating systems.
Waterproof Building Panel
Material Properties and
Areas of Application
KERDI features a modified polyethylene (PEVA)
core with non-woven polyproplyene on both
sides. KERDI-DS features a high-density
polyethylene (HDPE) core with non-woven
polyproplyene on both sides. KERDI is 8-mil
thick and has a water vapor permeance of 0.90
perms, when tested according to ASTM E96,
using Procedure E at 90% relative humidity.
KERDI-DS is 20-mil thick and features additives
to produce a water vapor permeance of 0.18
perms.
KERDI and KERDI-DS are waterproof
and resistant to most chemicals commonly
encountered in tiled environments. They are
resistant to aging and will not rot. KERDI
and KERDI-DS are highly resistant to saline
solutions, acid and alkaline solutions, many
organic solvents, alcohols, and oils. Information
regarding their resistance to specific substances
can be provided if concentration, temperature,
and duration of exposure are known. For acidresistant coverings, use an epoxy adhesive to set
and grout the tile.
KERDI and KERDI-DS are used on wall and
floor surfaces where protection against the
penetration of moisture or other harmful
substances is necessary. KERDI is suitable for
showers, intermittent use steam showers, tub
surrounds, and areas surrounding swimming
pools. Industrial applications include the food
industry, breweries, and dairies. KERDI-DS
is suitable for use in continuous use steam
rooms and other applications with similar vapor
management requirements.
12.1 Schluter®-KERDI-BOARD
The KERDI-BOARD waterproof building panel
simplifies shower installation by combining the
tile backing and waterproofing installation into
a single step. KERDI-BOARD gives tile setters
more control over their projects by providing
them with the means to simply and easily create
ideal substrates for tile. Unsuitable substrates
can be remedied and new substrates can be
created while keeping the requirements of the
tile covering in mind.
Application and Function
12.1
Schluter ®-KERDI-BOARD
is
a
multifunctional tile substrate and building panel,
which can also be used for creating bonded
waterproofing assemblies with tile coverings. It
consists of an extruded polystyrene foam panel,
with a special reinforcement material on both
sides and fleece webbing for effective anchoring
in thin-set mortar.
With the available panel thicknesses
of 3/16", 3/8", 1/2", 5/8", 3/4", 1", 1-1/2",
and 2" (5, 9, 12.5, 15, 19, 25, 38, and
50 mm), KERDI-BOARD covers a broad range
of application areas for creating flat, level, plumb,
square, and dimensionally stable substrates
for the installation of ceramic and natural stone
tiles. With suitable preparation of the abutting
seams and joint areas, the panel may be used
for bonded waterproofing assemblies.
KERDI-BOARD is suitable for: creating tile
SHOWER SYSTEM
substrates on masonry walls, wood or metal
framing, and other finished wall surfaces;
creating straight or curved partition walls;
creating straight or curved bathtub and shower
surrounds; concealing pipes and columns; as
well as creating bathtub platforms, vanities,
storage shelves, countertops, and various other
bathroom structures.
The boards are simply cut to size with a utility
knife. The gridlines, which are printed on the
surface, are helpful for neat and quick cuts
and installation. KERDI-BOARD can be fully
adhered in wall areas or spot-bonded with
thin-set mortar. If necessary, the material may
be secured with additional wall anchors. In the
case of stud framing, KERDI-BOARD is attached
with screws and washers from the matching
hardware system. Tiles can be installed directly
over KERDI-BOARD using the thin-set method.
L-shaped and U-shaped KERDI-BOARD panels
are available for creating pipe and column
coverings, and grooved panels are available for
creating curved elements. Schluter®-Systems
also offers profiles and attachment hardware for
wall connections and finishing edges, as well as
matching wall anchors and screws.
Material Properties and
Areas of Application
KERDI-BOARD is made from extruded
polystyrene foam, with a cement-free
reinforcement layer laminated to both sides and
an anchoring fleece webbing. The surface of the
board has gridlines consisting of 3/8" x 3/8" (10
x 10 mm) squares printed on one side.
KERDI-BOARD is waterproof and vapor
retardant and can withstand all chemical
stresses that typically occur in conjunction with
ceramic tile coverings. KERDI-BOARD may be
used in bonded waterproofing assemblies where
required. KERDI-BOARD is completely flat and
will not warp, even with one-sided exposure to
temperature and moisture fluctuations. It will not
rot or decay. KERDI-BOARD can be used in a
multitude of different application areas. In special
cases, the suitability of the material must be
verified based on the anticipated chemical and
mechanical stresses. The information provided
below is intended as general guidelines.
Structures on which KERDI-BOARD is to be
installed must be stable and meet any other
project-specific requirements. Select a suitable
material thickness if using KERDI-BOARD
for the construction of freestanding partition
walls, shelving, or similar structures, and use
reinforcement profiles as necessary. Arrange
supports made of KERDI-BOARD at regular
intervals consistent with conventional building
practices. Select the material thickness and
installation method depending on the evenness
of the substrate. KERDI-BOARD can be spotbonded to walls to correct substrate variations
or fully embedded in thin-set mortar where walls
are sufficiently even and plumb.
4
12.1 Schluter®-KERDI-BOARD
Property
Water vapor permeance
Method
ASTM E961
Thermal resistance (R-value)
ASTM C518
Service temperature range
Flame spread/smoke developed
Thermal barrier evaluation
1
2
3
ASTM E84
NFPA 286
Value
0.36 perms - 1/2" (12.5 mm)
R 9.1 – 2" (50 mm)
R 2.2 – 1/2" (12.5 mm)
R 0.9 – 3/16" (5 mm)
-58°F to 158°F (-50°C to 70°C)
Pass2
Pass2,3
Using the desiccant method at 100°F (38°C) and 90% RH
Per International Building Code Requirements
Porcelain tile used as thermal barrier over 1/2" (12.5 mm) -thick KERDI-BOARD on wood framing
Maintenance
Storage
KERDI-BOARD should be stored flat. In case of
outdoor storage, protect the material from direct
sunlight and weather exposure.
Shower Drains
8.2 Schluter®-KERDI-DRAIN
Schluter®-KERDI-DRAIN-H
8.7 Schluter®-KERDI-LINE
Conventional two-stage drains are designed to
connect to shower pan liners below the mortar
bed and do not allow a secure, watertight
connection to bonded waterproof membranes at
the top of the drain assembly. KERDI-DRAIN and
KERDI-LINE are designed specifically to ensure
a simple and secure connection to bonded
waterproof membranes, such as KERDI, at the
top of the assembly rather than below it, thereby
reducing the risk of leakage, efflorescence, and
mold growth.
Application and Function
8.2 Schluter®-KERDI-DRAIN is a floor
drain specifically designed to allow connections
to KERDI or other load-bearing, bonded
waterproof membranes. The membrane is
adhered to the large integrated bonding flange
to form a waterproof connection at the top of
the drain assembly. KERDI-DRAIN consists of a
drain casing and fully adjustable grate assembly
or covering support to which tile is applied.
The grate assembly accommodates a wide
range of tile thicknesses and allows lateral and
tilt adjustment as well. The covering support is
placed flush with the top of the bonding flange
and can therefore accommodate any thickness
tile covering.
The standard KERDI-DRAIN is attached directly
to the waste line. The drain casing is available in
ABS, PVC, or stainless steel. The plastic drain
casings feature a fleece-covered bonding flange.
They are available with standard 2" (50 mm) and 3"
(75 mm) outlets and attached to the pipe
using an appropriate solvent cement. The
stainless steel drain casings are available with
standard 2" (50 mm) or 3" (75 mm) no-hub
outlets or 2" (50 mm) threaded outlet. The
no-hub outlets are attached to the pipe using an
appropriate mechanical (e.g., flexible or no-hub)
coupling. The threaded outlets are attached
to the pipe using thread sealing compound or
tape. The simple connection to standard drain
outlets makes KERDI-DRAIN suitable for new
construction and renovation.
The KERDI-DRAIN adaptor kit is designed to
convert clamping ring drains by equipping them
with an integrated bonding flange. The adaptor
kit includes a stainless steel adaptor ring with
an over-molded rubber gasket and a variety of
perforated hole patterns that align with most
common clamping ring shower drains. The
adaptor ring replaces the clamping ring and is
attached to the drain body using the clamping
ring bolts. This connection is made watertight
via the rubber gasket and KERDI-FIX adhesive/
sealant. The integrated bonding flange slides into
the adaptor ring, with the over-molded rubber
gasket ensuring a watertight seal. KERDI-DRAIN
ADAPTOR KITS, available in 5-1/4" (133 mm)
and 7-1/2" (191 mm) diameter sizes, are used
to convert traditional clamping ring drains to
integrated bonding flange drains when removal
of the clamping ring drain is not practical (e.g.,
when they are set in concrete slabs). Adaptor
kits are suitable for both mortar beds and KERDISHOWER-T/-TS/-TT shower tray applications.
The KERDI-DRAIN grate assembly consists of
a frame, which can be seamlessly adjusted
SHOWER SYSTEM
to the thickness and layout of the ceramic tile
or stone covering via the height adjustment
collar and lateral adjustment ring, and grates or
cleanout covers that are placed within the frame.
The 4" (100 mm) standard grate assembly
frame features an approximately 1/8" (3 mm)
wide reveal after installation and grate/frame
combinations are available in stainless steel
with plain, chrome, nickel, classic gold, vintage
gold, rose gold, or oil-rubbed bronze finish
or anodized aluminum with brushed nickel,
brushed copper, or brushed brass finish. The 4"
(100 mm) style grate assembly frame features
a minimal reveal after installation and can be
combined with one of three grate options: Floral
(E), Curve (F), or Pure (G). The STYLE grates
are available in brushed stainless steel with
plain, nickel, classic gold, vintage gold, or rose
gold finishes and a range of textured colorcoated finishes including stone grey, cream,
greige, bronze, matte black, and matte white.
The 4" (100 mm) covering support is a square
stainless steel plate with KERDI laminated on
the surface to allow for bonding of ceramic
or stone tile, which creates a virtually invisible
drainage line. The 6" (150 mm) square and round
stainless steel grate assembly frames feature an
approximately 3/16" (5 mm) wide reveal after
installation and can be combined with stainless
steel grates or cleanout covers. Please note
that grate assemblies included with the plastic
KERDI-DRAIN featuring 3" (75 mm) outlets and
the residential adaptor kits only allow vertical and
tilt adjustment (no lateral adjustment).
Schluter®-KERDI-DRAIN-H is a floor drain
with an integrated bonding flange that provides
as large contact area for a secure connection
to Schluter®-KERDI waterproof membrane at
the top of the assembly. KERDI-DRAIN-H is
appropriate for both mortar bed and Schluter®KERDI-SHOWER-T/-TS/-TT
shower
tray
applications. The bonding flange is sloped to
simplify installation of the mortar bed.
The KERDI-DRAIN-H flange provides a horizontal
connection to the drain pipe and is available
in ABS or PVC with a 2" (50 mm) outlet. It is
ideal for applications where the use of a vertical
connection to the drain pipe is not possible
or practical (e.g., suspended or post-tension
concrete floors, basement slabs, or wood floor
installations where relocating the hole in the
floor is not practical). The horizontal outlet allows
the positioning of the drain in the desired area
regardless of drain pipe location.
A compensation board is available for use
with KERDI-DRAIN-H in conjunction the KERDISHOWER-T/-TS/-TT shower trays.
The KERDI-DRAIN-H bonding flange is
compatible with the standard KERDI-DRAIN
grate options. Please refer to the previous
section on KERDI-DRAIN for details.
8.7 Schluter®-KERDI-LINE is a low profile
linear floor drain specifically designed for bonded
5
waterproofing assemblies. KERDI-LINE can be
installed adjacent to walls or at intermediate
locations. The floor can be sloped on a single
plane to KERDI-LINE, which enables the use of
large-format tiles and creates interesting design
opportunities.
KERDI-LINE consists of a formed stainless steel
channel body and grate assembly or covering
support to which tile is applied.
The channel body features a standard 2" (50
mm) no-hub outlet and is attached to the pipe
using an appropriate mechanical (e.g., flexible
or no-hub) coupling. The simple connection
to standard drain outlets makes KERDI-LINE
suitable for new construction and renovation.
KERDI-LINE is available with both center and
off-set outlets. The off-set outlet is located 8"
(20.3 cm) from the edge of the channel body
and provides flexibility when obstacles (e.g., floor
joists) are encountered during installation. KERDILINE includes a corresponding polystyrene foam
channel support to set the drain elevation to
the corresponding KERDI-SHOWER-LT/-LTS
shower trays. The perimeter of the channel body
consists of a bonding flange laminated with a
collar made of KERDI. It ensures a simple and
secure connection to the bonded waterproofing
assembly, both in the floor area and on adjacent
walls. KERDI-LINE is available in channel lengths
from 20" to 72" (50 cm to 180 cm) in 4" (10
cm) increments. The bonding flange extends
approximately 1" (2.5 cm) beyond the channel
on all sides.
The KERDI-LINE grate assembly consists
of a stainless steel frame that can be
seamlessly adjusted to the thickness of
the ceramic tile or stone covering – 1/8"
to 1" (3 mm to 25 mm) for standard grate
assemblies and 1/4" to 23/32" (6 mm to 18 mm)
for style grate assemblies – and stainless steel
grates that are placed within the frame. The
standard grate assembly frame features a 3/8"
(10 mm) wide reveal after installation and can be
combined with one of two grate options: Closed
(A) or Perforated (B). Each standard assembly
is available in a brushed or chrome finish. The
Perforated (B) option is also available with a
locking mechanism (brushed stainless steel,
3/4" – 19 mm frame only) for applications where
tamper resistance is desired or required (e.g.,
healthcare and education facilities, etc.). The
style grate assembly frame features a minimal
reveal after installation and can be combined
with one of three grate options: Floral (E), Curve
(F), or Pure (G). Each style assembly is available
in a brushed finish. The covering support is
placed flush with the top of the channel body
and can therefore accommodate any thickness
tile covering.
If KERDI-LINE is placed at shower entrance, it
is recommended that grate assembly A or the
covering support is chosen and that the drainage
openings span the maximum width of the
entrance to limit potential overflow; secondary
drainage (e.g., KERDI-DRAIN) may be required
in the drying area.
Schluter®-KERDI-LINE-FC is a stainless steel
cover plate for use with KERDI-LINE to create
a seamless look in applications where multiple
drains are installed end-to-end. KERDI-LINE-FC
features a brushed finish, and is designed for
use with either the solid or perforated grates with
brushed stainless steel frame.
14.1
Schluter ®-SHOWERPROFILE-S/-R
system profiles represent an elegant solution for
finishing the area between the floor and the first
course of wall tile in a way that eliminates cutting
wedges of tile and ensures a consistent elevation
of the first course of wall tile in KERDI-LINE
applications. SHOWERPROFILE-S consists
of a trapezoid-perforated anchoring leg with
a groove, which accepts a tapered brushed
stainless steel profile that matches the slope of
the KERDI-SHOWER-L shower tray. The profile
is adjusted to cover the exposed wall area and
forms the visible surface. SHOWERPROFILE-R
consists of a brushed stainless steel profile and
corresponding channel. The profile is adjusted
to fit the space between the KERDI-LINE and
the wall tile and forms the visible surface in
applications where the KERDI-LINE is placed
adjacent to a wall.
Material Properties and
Areas of Application
KERDI-DRAIN, KERDI-DRAIN-H and KERDILINE are suitable for use in residential and
commercial applications, including areas subject
to foot and wheelchair traffic, such as showers
and wet rooms in homes, hotels, schools,
healthcare facilities, etc.
Various configurations of KERDI-DRAIN,
KERDI-DRAIN-H and KERDI-LINE are listed
by UPC®, CSA, and ICC-ES PMG. Relevant
industry standard guidelines for floor drains
with integrated bonding flange include methods
B422, B422C, SR613 and SR614 in the Tile
Council of North America's (TCNA) Handbook
for Ceramic Tile Installation and Method 326DR
in the Terrazzo, Tile and Marble Association of
Canada (TTMAC) Specification Guide 093000
Tile Installation Manual.
KERDI-DRAIN and KERDI-DRAIN-H drain
flanges are formed using ABS, PVC, or stainless
steel 304 (1.4301 = V2A). Plastic drain flanges
feature a polypropylene fleece webbing on the
surface of the bonding flange to accept a bond
to thin-set mortar. The KERDI-DRAIN adaptor
kits feature adaptor rings made of stainless steel
304 (1.4301 = V2A) with thermoplastic rubber
gaskets and adaptor flanges made of ABS.
Drain grates are available in plain and coated
stainless steel 304 (1.4301 = V2A) and anodized
aluminum. The covering support is stainless steel
304 (1.4301 = V2A) with KERDI laminated on
the surface.
SHOWER SYSTEM
The KERDI-LINE channel body is formed using
stainless steel 316 L (1.4404 =V4A) and features
a bonding flange with a KERDI collar laminated
on the surface. KERDI is a bonded waterproof
membrane with a modified polyethylene (PEVA)
with non-woven polypropylene fleece on both
sides to anchor the membrane in the thin-set
mortar. The frame and grates are made of
stainless steel 316 L (1.4404 =V4A). The channel
support is made of pressure-resistant, expanded
polystyrene (EPS). The KERDI-LINE-FC cover
plate is roll-formed using stainless steel 316
L (1.4404 = V4A). The SHOWERPROFILE-S
anchoring leg is made of recycled, rigid PVC.
The SHOWERPROFILE-S/-R profiles are made
of stainless steel 316 L (1.4404 = V4A) with
KERDI laminated on the backside.
hydrochloric, hydrofluoric) and bases/alkaline
cleaners (e.g., bleach, ammonia, chlorides). Do
not use abrasive cleaning agents and tools.
Even stainless steel requires periodic cleaning,
which will maintain a neat appearance and
reduce the risk of corrosion. Stainless steel
surfaces develop a sheen when treated with a
chrome-polishing agent.
Schluter®-Systems drain grates are resistant
to most chemicals encountered in tiled
environments. In special cases, the suitability
of a proposed type of material must be verified
based on the anticipated chemical, mechanical,
and/or other stresses. In general, grates should
be protected against abrasion or scratching.
Exceptions and special considerations are listed
below.
17.1 Schluter®-SHELF-E/-W/-N
Even stainless steel requires periodic cleaning,
which will maintain a neat appearance and
reduce the risk of corrosion. Stainless steel
surfaces develop a sheen when treated with a
chrome-polishing agent.
Application and Function
Shower Profiles
Stainless steel can sustain high mechanical
stresses and is particularly well suited for
applications requiring resistance against
chemicals and acids. For more severe chemical
exposure, such as de-icing salts and chemicals
used in swimming pools, we recommend
the use of stainless steel 316 L, which offers
even higher corrosion resistance than the
304. Even stainless steel cannot withstand all
chemical exposures, such as hydrochloric acid,
hydrofluoric acid or certain chlorine, chloride and
brine concentrations.
Metallic-coated grates are stainless steel 304
with a metallic coating created using physical
vapor deposition (PVD). The resulting metallic
film is very hard and corrosion-resistant.
Textured color-coated grates are stainless
steel with a powder coat. Textured color-coated
shelves are aluminum with a powder coat.
The coating is color-stable, UV-resistant, and
suitable for exterior use. Protect the profile
against abrasion or scratching.
Anodized aluminum grates feature an anodized
layer that retains a uniform appearance during
normal use. The surface may be damaged
by grout or setting material. Therefore, these
materials must be removed immediately.
Maintenance
KERDI-DRAIN, KERDI-DRAIN-H, KERDI-LINE,
and SHOWERPROFILE-S/-R require no special
maintenance and are resistant to mold and fungi.
The drain grates may be removed to clean the
drain housing and the drain pipes.
Clean the grates and profiles using neutral
cleaners. Avoid the use of strong acids (e.g.,
6
Shelves
17.1 Schluter®-SHELF is a wall storage system
available in brushed stainless steel or aluminum
in a range of textured color-coated finishes
including stone grey, cream, greige, bronze,
matte black, and matte white. The shelves
are 5/32" (4 mm) -thick and features designs
coordinating with the Curve and Floral styles
found in KERDI-DRAIN and KERDI-LINE drain
grates. They can be used in showers and
other tiled wall applications (e.g., kitchens and
baths). Schluter®-SHELF-E is suitable for corner
installations and available in three different
shapes. It features 3/32" (2 mm) -thick tabs
that allow for installation with the tile or in
retrofit applications. Schluter®-SHELF-W is a
rectangular shelf with two trapezoid-perforated
anchoring legs for installation on walls in
conjunction with the tile. Schluter®-SHELF-N
is a rectangular shelf that fits the prefabricated
Schluter®-KERDI-BOARD-SN shower niche. It is
installed in conjunction with the tile.
Material Properties and Applications
Schluter®-SHELF is resistant to most chemicals
encountered in tiled environments. In special
cases, the suitability of a proposed type
of material must be verified based on the
anticipated chemical, mechanical, and/or other
stresses. Exceptions and special considerations
are listed below.
Schluter®-SHELF in stainless steel is produced
using stainless steel 304 (1.4301 = V2A). Stainless
steel can sustain high mechanical stresses and
is particularly suitable for applications requiring
resistance against chemicals and acids. However,
even stainless steel is not resistant to all chemical
stresses, and may be affected by hydrochloric
and hydrofluoric acid or certain chlorine, chloride
and brine concentrations, which may be present
in detergents or swimming pools.
Schluter®-SHELF with textured color-coated
finishes are produced using aluminum that is
color-coated with a powder coat. The coating
is color-stable, UV-resistant, and suitable for
exterior use. Protect the shelf against abrasion
and scratching.
Maintenance
Schluter®-SHELF requires no special maintenance
or care and is resistant to mold and fungi.
Clean shelves periodically using neutral cleaning
agents. Avoid the use of strong acids (e.g.,
hydrochloric, hydrofluoric) and bases/alkaline
cleaners (e.g., bleach, ammonia, chlorides). Do
not use abrasive cleaning agents and tools.
14.2 Schluter®-WS/-WSC/-WSL
14.2 Schluter®-WSK/-WSC/-WSL
Application and Function
14.2 Schluter®-SHOWERPROFILE-WS/-WSK
system profiles, together with the Schluter®SHOWERPROFILE-WSL/-WSC inserts, form a
splashguard at the entrance of curbless showers.
Schluter®-SHOWERPROFILE-WS is an anodized
aluminum support profile that is set in conjunction
with the tile using thin-set mortar. It has a 3/4"
(19 mm) –wide visible surface and a height of
5/16" (8 mm). Where thicker tiles are used,
simply fill the space below the profile with thinset mortar.
Schluter ®-SHOWERPROFILE-WSK
is
an
anodized aluminum support profile that is
adhered to the tile surface. It has a 2-1/16" (52
mm) –wide visible surface and a height of 5/16"
(8 mm).
The support profiles are combined with either
the SHOWERPROFILE-WSL insert or the
SHOWERPROFILE-WSC insert.
Schluter ®-SHOWERPROFILE-WSL
is
an
upright insert made of transparent polyurethane.
The insert is collapsible when stepped on or
rolled over with a wheelchair. The insert protrudes
SHOWER SYSTEM
1-5/32" (29 mm) above the profile surface. The
SHOWERPROFILE-WSL insert does not comply
with the Americans with Disabilities Act (ADA),
since it exceeds the allowable height of a vertical
transition despite being collapsible. Please
check with local code officials for acceptance
on projects where ADA guidelines must be
observed before installation.
Schluter®-SHOWERPROFILE-WSC is a semicircular insert made of semi-rigid PVC. The
insert creates an inconspicuous transition from
the shower area to the adjoining space and a
5/8" (16 mm) –wide visible surface. The insert
protrudes 3/64" (1.2 mm) above the profile
surface. The SHOWERPROFILE-WSC insert
complies with the Americans with Disabilities
Act (ADA).
Material Properties and Areas of
Application
The SHOWERPROFILE-WS/-WSK support
profiles feature an anodized aluminum layer
that retains uniform appearance during normal
use. The surface, however, is susceptible to
scratching and wear and may be damaged
by grout or setting material. Cementitious
materials, in conjunction with moisture, become
alkaline. Since aluminum is sensitive to alkaline
substances, exposure to the alkali (depending
on the concentration and duration of exposure)
may result in corrosion (aluminum hydroxide
formation). Therefore, it is important to remove
mortar or grout residue immediately from visible
surfaces. In addition, ensure the profile is solidly
embedded in the setting material and that all
cavities are filled to prevent the collection of
alkaline water.
The SHOWERPROFILE-WSL insert is made of
highly flexible polyurethane.
The SHOWERPROFILE -WSC insert is made of
semi-rigid PVC.
The inserts can withstand chemical stresses
typically encountered in tiled environments.
Maintenance
SHOWERPROFILE-WS/-WSK support profiles
require no special maintenance or care and
are resistant to mold and fungi. In the case
of anodized aluminum, do not use abrasive
cleaning agents. The SHOWERPROFILE-WSC/
-WSL inserts are specifically treated to resist
the growth of fungi and bacteria and require no
special maintenance or care.
Adhesive/Sealant
Any protrusions through the KERDI membrane
can be treated with KERDI-FIX, or equivalent
sealant, to ensure a fully waterproof assembly.
Schluter®-KERDI-FIX Technical Data
Color
Basic raw material
Specific weight
Solvent content
Isocyanate content
Dry materials content
VOC emissions
Shear strength beech wood/beech wood
Shear strength aluminum/aluminum
Elongation at failure
Skinning
Curing
Permissible total movement
Processing temperatures
Temperature stability
Moisture resistance
Frost ability
Cartridge volume
Estimated coverage
5" (12.7 cm) connection
to fixed building elements
1/4" (6 mm) bead
Application and Function
8.3 Schluter®-KERDI-FIX
8.3 Schluter®-KERDI-FIX is a singlecomponent, waterproof sealing and bonding
compound with a silane-modified polymer base,
which can be used in various applications. In
conjunction with KERDI, KERDI-FIX can be used
to waterproof pipe and valve protrusions in the
Schluter®- Shower System. KERDI-FIX is used
to bond the KERDI membrane to the stainless
steel KERDI-DRAIN bonding flange. KERDI-FIX
can also be used to bond KERDI to building
elements such as bathtubs, window elements
and door frames.
Material Properties and
Areas of Application
KERDI-FIX is odorless, weather- and
UV-resistant. The product is elastomeric, free
of solvents, and provides a strong bond to
most materials, including wood, stone, concrete,
metal, glass, and many synthetic materials.
KERDI-FIX can be painted over with most alkyd
resins or dispersion paint types. The suitability of
the material must be
verified based on the anticipated chemical,
mechanical, and/or other stresses. KERDI-FIX is
7
Grey or bright white
Silyl-modified polymer (SMP)
Approx. 93.6 lb/ft3 (1.5 g/ml)
0%
0%
Approx. 100%
0.0 mg/m3
Approx. 435 psi (3 N/mm2)
Approx. 290 psi (2 N/mm2)
Approx. 200%
About 10 minutes
1/8" (3 mm) per 24 hours
About 20%
Don’t install at temperatures below 40 ºF (5 ºC)
-40 ºF (-40 ºC) to 212 ºF (100 ºC), temporarily
356 ºF (180 ºC) [max. 30 minutes]
Very good
Not sensitive to frost
9.81 oz (290 ml)
12' 10" (3.9 m) per cartridge
30' 1" (9.2 m) per cartridge
not recommended in or around swimming pool
applications.
KERDI-FIX has been evaluated according to the
"Standard Method for the Testing and Evaluation
of Volatile Organic Chemical Emissions from
Indoor Sources Using Environmental Chambers,
Version 1.1" for California Specification 01350
and found to comply with the VOC requirements.
California Specification 01350 is referenced by
various green building standards and rating
systems.
Maintenance
Storage
Unopened packages of KERDI-FIX can be
stored in a cool location that is above freezing
temperatures for up to 18 months.
Once the cartridge has been opened, the
material has a limited shelf life.
System Installation
For complete installation guidelines and
warranty criteria for shower applications,
please contact Schluter®-Systems at 800472-4588 (USA) or 800-667-8746 (Canada)
to receive a copy of the Schluter®-Shower
System Installation Handbook and a
step-by-step installation video. To download
a PDF version of the Handbook or to view
the installation video online, please visit
www.schluter.com.
SHOWER SYSTEM
Product Item Numbers
8.3 Schluter®-KERDI-SHOWER-T
Item No.
KST965/1525
KST1220/1525
KST1220/1830
KST1525
KST1830
Tray with center drain placement
Dimensions
Perimeter height
Drain placement
97 cm x 152 cm (38" x 60")
122 cm x 152 cm (48" x 60")
122 cm x 183 cm (48" x 72")
152 cm x 152 cm (60" x 60")
183 cm x 183 cm (72" x 72")
29 mm (1-1/8")
28 mm (1-3/32")
32 mm (1-1/4")
30 mm (1-3/16")
32 mm (1-1/4")
center
center
center
center
center
8.3 Schluter®-KERDI-SHOWER-TS
Item No.
KST965/1525S
Tray with off-center drain placement
Dimensions
Perimeter height
Drain placement
97 cm x 152 cm (38" x 60")
38 mm (1-1/2")
off-center
8.3 Schluter®-KERDI-SHOWER-TT
Item No.
KST965/810BF
KST915/1220BF
KST915BF
KST965BF
KST1220BF
KST965NA/BF
Thin tray
Dimensions
Perimeter height
Drain placement
81 cm x 97 cm (32" x 38")
91 cm x 122 cm (36" x 48")
91 cm x 91 cm (36" x 36")
97 cm x 97 cm (38" x 38")
122 cm x 122 cm (48" x 48")
97 cm x 97 cm (38" x 38") Neo angle
23 mm (29/32")
25 mm (1")
22 mm (7/8")
23 mm (29/32")
25 mm (1")
26 mm (1-1/32")
center
center
center
center
center
off-center
8.8 Schluter®-KERDI-SHOWER-LT
KSLT1000
KSLT1220
KSLT1395
Tray with center linear drain placement
Dimensions
Perimeter height
Drain placement
100 cm x 100 cm (39" x 39")
122 cm x 122 cm (48" x 48")
140 cm x 140 cm (55" x 55")
32 mm (1-1/4")
34 mm (1-3/8")
36 mm (1-7/16")
center
center
center
Item No.
8.8 Schluter®-KERDI-SHOWER-LTS
Tray with perimeter linear drain placement
Dimensions
Perimeter height
Drain placement
KSLT1000S
KSLT1220S
KSLT1395S
100 cm x 100 cm (39" x 39")
122 cm x 122 cm (48" x 48")
140 cm x 140 cm (55" x 55")
KSLT915/1395S
KSLT915/1830S
KSLT965/1930S
KSLT1930/965S
91 cm x 140 cm (36" x 55")
91 cm x 183 cm (36" x 72")
97 cm x 193 cm (38" x 76")
193 cm x 97 cm (76" x 38")
42 mm (1-21/32")
46 mm (1-13/16")
50 mm (2")
50 mm (2")
58 mm (2-5/16")
60 mm (2-3/8")
41 mm (1-5/8")
perimeter
perimeter
perimeter
perimeter
perimeter
perimeter
perimeter
Item No.
8.3 Schluter®-KERDI-SHOWER-SR
Item No.
SR 122
Prefabricated EPS ramp
Width
Length
48" – 122 cm
Height
15-7/8" – 40 cm
1-1/2" – 3.8 cm
12.1 Schluter®-KERDI-BOARD-SC
Item No.
KBSC 115 150 970
KBSC 115 150 1220
KBSC 115 150 1524
Prefabricated curb
Width
Length
Height
4-1/2" – 11.5 cm
4-1/2" – 11.5 cm
4-1/2" – 11.5 cm
38" – 97 cm
48" – 122 cm
60" – 152 cm
6" - 15 cm
6" - 15 cm
6" - 15 cm
12.1 Schluter®-KERDI-BOARD-SB
Item No.
KBSB 410 TA
KBSB 610 TA
KBSB 290 970 RA
KBSB 410 1220 RA
8
Prefabricated bench
Width
Length
Height
Shape
16" – 41 cm
24" – 61 cm
38" – 97 cm
48" – 122 cm
16"
– 41 cm
24"
– 61 cm
11-1/2" – 29 cm
16"
– 41 cm
20" - 51 cm
20" - 51 cm
20" - 51 cm
20" - 51 cm
Triangular
Triangular
Rectangular
Rectangular
SHOWER SYSTEM
8.1 Schluter®-KERDI
Item No.
KERDI 200/5M
KERDI 200/7M
KERDI 200/10M
KERDI 200/20M
KERDI 200
Waterproofing membrane
Width
Length
Area
Thickness
3' 3" – 1 m
3' 3" – 1 m
3' 3" – 1 m
3' 3" – 1 m
3' 3" – 1 m
16' 5" – 5 m
23' – 7 m
33' – 10 m
65' 7" – 20 m
98' 5" – 30 m
54 ft2 – 5 m2
75 ft2 – 7 m2
108 ft2 – 10 m2
215 ft2 – 20 m2
323 ft2 – 30 m2
8 mil
8 mil
8 mil
8 mil
8 mil
Width
Length
Area
Thickness
3' 3" – 1 m
98' 5" – 30 m
323 ft2 – 30 m2
20 mil
8.1 Schluter®-KERDI-DS
Waterproofing membrane
Item No.
KERDI-DS
12.1 Schluter®-KERDI-BOARD
Item No.
KB 12 1220 812
KB 5 1220 1625
KB 9 1220 1625
KB 12 1220 1625
KB 5 1220 2440
KB 9 1220 2440
KB 12 1220 2440
KB 15 1220 2440
KB 19 625 2440
KB 25 625 2440
KB 38 625 2440
KB 50 625 2440
KB 15 1220 3050
Waterproof building panel
Width
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
48"
– 122 cm
24-1/2" – 62.5 cm
24-1/2" – 62.5 cm
24-1/2" – 62.5 cm
24-1/2" – 62.5 cm
48"
– 122 cm
Length
32" – 81 cm
64" – 162.5 cm
64" – 162.5 cm
64" – 162.5 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
96" – 244 cm
120" – 305 cm
Thickness
1/2" – 12.5 mm
3/16" – 5 mm
3/8" – 9 mm
1/2" – 12.5 mm
3/16" – 5 mm
3/8" – 9 mm
1/2" – 12.5 mm
5/8" – 15 mm
3/4" – 19 mm
1"
– 25 mm
1-1/2" – 38 mm
2"
– 50 mm
5/8" – 15 mm
12.1 Schluter®-KERDI-BOARD-SN
KB
KB
KB
KB
W2
W1
H1 H2
9
12
12
12
12
SN
SN
SN
SN
Item No.
305 152 A
305 305 A
305 508 A1
305 711 A1
Prefabricated shower niche
W1
12"
12"
12"
12"
–
–
–
–
305
305
305
305
H1
mm
mm
mm
mm
6"
12"
20"
28"
– 152 mm
– 305 mm
– 508 mm
– 711 mm
W2
16"
16"
16"
16"
–
–
–
–
406
406
406
406
H2
mm
mm
mm
mm
10"
16"
24"
32"
–
–
–
–
250
406
610
810
mm
mm
mm
mm
Depth
3-1/2" – 8.9
3-1/2" – 8.9
3-1/2" – 8.9
3-1/2" – 8.9
cm
cm
cm
cm
Shelf
1
1
SHOWER SYSTEM
1
6
2
3
4
5
Schluter®-KERDI-BOARD-KIT
Includes
1
2
3
4
5
6
KERDI-BOARD
KERDI-BAND
KERDI-SEAL-PS
KERDI-SEAL-MV
KERDI-BOARD-ZT/-ZS
KERDI-FIX
Description
Quantity
Waterproofing building panel 1/2" x 48" x 38" (1.25 cm x 122 cm x 97 cm) = 101 ft2 (9.4 m²)
Waterproofing strip 5" x 98' 5" (125 mm x 30 m)
Pipe seal 1/2" (12.5 mm), 3/4" (20 mm)
Mixing valve seal 4-1/2" (114 mm)
Screws and washers
Sealant 9.8 oz (290 ml)
8.1 Schluter®-KERDI-BAND
Item No.
KEBA 100/125/5M
KEBA 100/125/10M
KEBA 100/125
KEBA 100/125/300
KEBA 100/185/5M
KEBA 100/185
KEBA 100/250/5M
KEBA 100/250
5"
– 12.5 cm
5"
– 12.5 cm
5"
– 12.5 cm
5"
– 12.5 cm
7-1/4" – 18.5 cm
7-1/4" – 18.5 cm
10"
– 25 cm
10"
– 25 cm
Length
Thickness
16' 5" – 5 m
33' – 10 m
98' 5" – 30 m
984' 3" – 300 m
16' 5" – 5 m
98' 5" – 30 m
16' 5" – 5 m
98' 5" – 30 m
4 mil
4 mil
4 mil
4 mil
4 mil
4 mil
4 mil
4 mil
8.1 Schluter®-KERDI-FLEX
FLEX
FLEX
FLEX
FLEX
2
1
140
2
Waterproofing strip
Width
Item No.
125/5M
250/5M
125/30
250/30
8
1
Waterproofing strip for use above movement joints
Width
Length
5" – 12.5 cm
10" – 25 cm
5" – 12.5 cm
10" – 25 cm
Thickness
16' 5" – 5 m
16' 5" – 5 m
98' 5" – 30 m
98' 5" – 30 m
12 mil
12 mil
12 mil
12 mil
8.1 Schluter®-KERDI-KERECK-F
Item No.
KERECK/FI 2
KERECK/FI 10
KERECK/FA 2
KERECK/FA 10
Preformed corner
Thickness
Packaging
4 mil
4 mil
4 mil
4 mil
2 inside corners
10 inside corners
2 outside corners
10 outside corners
8.1 Schluter®-KERDI-KERS-B
Item No.
Description
Packaging
KERECK 135 FI 2
KERECK 135 FI 10
KERSB 135 K LR
KERSB 135 K 5LR
4 mil
4 mil
4 mil
4 mil
Inside corner, 135°
Inside corner, 135°
Bench corners
Bench corners
KERSB 135 K
4 mil
Bench/ neo-angle corner kit
2 units
10 units
1 right and 1 left
5 right and 5 left
1 right and 1 left bench corner, and
2 135° inside corners
8.3 Schluter®-KERDI-FIX
Item No.
KERDIFIX / color*
KERDIFIX 100 G
10
Preformed corner
Thickness
Adhesive/sealant
Description
Cartridge - 9.81 oz — 290 ml
Tube - 3.38 oz — 100 ml
*Color Codes
BW
Bright
white
G
Grey
To complete the item number, add the
color code (e.g., KERDIFIX/BW).
SHOWER SYSTEM
8.1 Schluter®-KERDI-KERS
Preformed corner
Item No.
Thickness
KERS 20L
KERS 28L
KERS 20R
KERS 28R
Packaging
4 mil
4 mil
4 mil
4 mil
Left inside corner – 3/4" (20 mm)
Left inside corner – 1-3/32" (28 mm)
Right inside corner – 3/4" (20 mm)
Right inside corner – 1-3/32" (28 mm)
8.1 Schluter®-KERDI-SEAL-PS
Item No.
KMS185/12
KMS185/20
KMS10185/12
KMS10185/20
Pipe seal with over-molded rubber gasket
Pipe nipple opening diam.
Thickness
Packaging
4 mil
4 mil
4 mil
4 mil
1 unit
1 unit
10 units
10 units
1/2" – 12.5 cm
3/4" – 20 cm
1/2" – 12.5 cm
3/4" – 20 cm
8.1 Schluter®-KERDI-SEAL-MV
Item No.
KMSMV235/114
KMSMV10235/114
Mixing valve seal with over-molded rubber gasket
Mixing valve opening diam.
Thickness
4-1/2" – 114 cm
4-1/2" – 114 cm
Packaging
4 mil
4 mil
1 unit
10 units
8.1 Schluter®-KERDI-KM
Item No.
KM5117/22
Pipe seal
Dimensions
Thickness
7" x 7" – 17 x 17 cm
Packaging
4 mil
5 units
Hole diameter, ø = 7/8" - 22 mm
14.2 Schluter®-SHOWERPROFILE-WS
Item No.
SPWS 19 AE/100
SPWS 19 AE
Support profile
Height
Length
5/16" - 8 mm
5/16" - 8 mm
39" - 1 m
8' 2-1/2" - 2.5 m
14.2 Schluter®-SHOWERPROFILE-WSK
Item No.
SPWSK 52 AE/100
SPWSK 52 AE
Support profile - retrofit
Height
Length
5/16" - 8 mm
5/16" - 8 mm
39" - 1 m
8' 2-1/2" - 2.5 m
14.2 Schluter®-SHOWERPROFILE-WSC
Item No.
SPWSC 16 GS/100
SPWSC 16 GS
Semi-circular lip insert
Height
Length
5/16" - 8 mm
5/16" - 8 mm
39" - 1 m
8' 2-1/2" - 2.5 m
14.2 Schluter®-SHOWERPROFILE-WSL
Item No.
SPWSL 30 T/100
SPWSL 30 T
Straight lip insert
Height
Length
5/16" - 8 mm
5/16" - 8 mm
39" - 1 m
8' 2-1/2" - 2.5 m
14.2 Schluter®-SHOWERPROFILE-WSK-EK
Item No.
End cap
Height
EK/SPWSK 52 AE
5/16" - 8 mm
Schluter®-KERDI-TROWEL
Item No.
TRL-KER6
TRL-KER
11
Trowel
Notch Size
Packaging
1/8" x 1/8" - 3 x 3 mm
1/8" x 1/8" - 3 x 3 mm
6 units
1 unit
SHOWER SYSTEM
8.2 Schluter®-KERDI-DRAIN
4" Grate Options
Tileable Covering Support
Anodized Aluminum
Available in the following colors and finishes:
Brushed
Nickel
(ATGB)
Brushed
Copper
(AKGB)
Brushed
Brass
(AMGB)
Design 2
(ECS)
Patent pending
Stainless Steel
Available in the following colors and finishes:
Design 1
Stainless
Steel
(E)
Rose Gold
(ERG)
Chrome
(EP)
Vintage Gold
(EVG)
Oil-rubbed
Bronze
(EOB)
Classic Gold
(ECG)
Available in the following colors and finishes:
Pure
Curve
Nickel
(ET)
Floral
Brushed
Stainless Steel
(EB)
Brushed
Classic Gold
(EBCG)
Stone Grey
(TSSG)
Brushed
Nickel
(EBT)
Cream
(TSC)
Matte Black
(MGS)
Brushed
Rose Gold
(EBRG)
Greige
(TSBG)
Matte White
(MBW)
Brushed
Vintage Gold
(EBVG)
Bronze
(TSOB)
6" Grate Options
Stainless Steel
Stainless Steel Cover for Cleanout Applications
(6E)
(6RE)
(6CE)
Flange Options
ABS - 2" or 3" Outlet
PVC - 2" or 3" Outlet
Note: Product listings and certifications can be referenced on page 37.
12
Stainless Steel - 2" or 3"
No-hub Outlet
Stainless Steel - 2"
Threaded Outlet
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
ABS or PVC FLANGE — 2" or 3" OUTLET
2" (50 mm) drain outlet
Material
3" (75 mm) drain outlet
Item No.
Material
Item No.
KD2 FLK ABS
KD3 FLK ABS
ABS
ABS
KD2 FLK PVC
KD3 FLK PVC
PVC
PVC
Additional components included
4x
Inside
corners
2x
1x
1x
Pipe seal
(3/4" - 20 mm)
Outside
corners
Mixing valve seal
(4-1/2" - 114 mm)
Flange measurements
ABS or PVC
i
When using a flange with 3" outlet, a 6"
grate is recommended.
13
2" (50 mm) drain outlet
3" (75 mm) drain outlet
A
11-13/16" - 300 mm
11-13/16" - 300 mm
B
4-17/32"
- 115.2 mm
4-17/32"
- 115.2 mm
C
2-45/64"
- 68.6 mm
3-15/16"
- 100 mm
D
2-3/8"
- 60.5 mm
3-1/2"
- 88.8 mm
E
3-15/16"
- 100 mm
3-15/16"
- 100 mm
F
1-39/64"
- 40.6 mm
2"
- 50.8 mm
G
7/8"
- 22.5 mm
1-1/2"
- 38.1 mm
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
STAINLESS STEEL FLANGE — 2" or 3" OUTLET
2" (50 mm) drain outlet
3" (75 mm) drain outlet
Material
Item No.
Material
Item No.
KD2 FLK E
KD3 FLK E
No-hub
No-hub
KD2 FLK ETH
Threaded
Additional components included
4x
Inside
corners
2x
Outside
corners
1x
1x
Pipe seal
(3/4" - 20 mm)
Mixing
valve seal
(4-1/2" - 114 mm)
1x
KERDI-FIX
sealing and bonding
compound (3.38 oz – 100 ml)
Flange measurements
Stainless steel
2" (50 mm) no-hub outlet
i
When using a flange with 3" outlet, a 6"
grate is recommended.
14
3" (75 mm) no-hub outlet
A
9-27/32"
- 250 mm
9-27/32"
B
4-1/2"
- 115.4 mm
4-1/2"
- 250 mm
- 114 mm
C
2-13/32"
- 61.3 mm
3-7/16"
- 87.4 mm
D
2-13/32"
- 60.6 mm
3-5/16"
- 84.2 mm
E
3-11/32"
- 85 mm
3-7/16"
- 87.4 mm
F
53/64"
- 21 mm
1-5/32"
- 29.4 mm
SHOWER SYSTEM
Schluter®-KERDI-DRAIN-H
ABS or PVC FLANGE — 2" OUTLET HORIZONTAL
2" (50 mm) drain outlet
Material
Item No.
KDH2 FLK ABS
ABS
KDH2 FLK PVC
PVC
Additional components included
4x
2x
Inside
corners
1x
1x
Pipe seal
(3/4" - 20 mm)
Outside
corners
Mixing valve seal
(4-1/2" - 114 mm)
Flange measurements
ABS or PVC
2" (50 mm) horizontal drain outlet
A
B
D
C
E
F
A
11-13/16" - 300 mm
B
4-21/32"
- 118.3 mm
C
2-47/64"
- 69.5 mm
D
2-3/8"
- 60.5 mm
E
3-3/8"
- 85.7 mm
F
1-1/16"
- 27 mm
Schluter®-KERDI-SHOWER-CB
Schluter ®-KERDI-SHOWER-CB
is
a height compensation board made of
lightweight expanded polystyrene used to
accommodate the drain body and waste
pipe height, when installing the Schluter®KERDI-DRAIN-H in conjunction with the
Schluter ®-KERDI-SHOWER
-T/TS/TT
shower trays. The compensation board
can easily be cut to size to fit around the
drain and waste pipe, and multiple boards
can be used to fit the size and shape of
the shower.
61 cm 24"
122 cm - 48"
8.9 cm 3-1/2"
122 cm - 48"
Schluter®-KERDI-SHOWER-CB
Compensation board
Item No.
KSCB 90 610 1220
15
Dimensions
122 cm x 61 cm x 8.9 cm (48" x 24" x 3-1/2")
SHOWER SYSTEM
Schluter®-KERDI-DRAIN-A
ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING
Schluter®-KERDI-DRAIN ADAPTOR KITS are used to convert traditional clamping ring drains to integrated bonding flange drains
when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces
the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX. The bonding flange then slides into the adaptor
ring and seals against the rubber gasket. Adaptor kits are suitable for both mortar bed and Schluter®-KERDI-SHOWER-T/-TS/-TT
shower tray applications.
5-1/4" (133.4 mm) adaptor ring
7-1/2" (191 mm) adaptor ring
Flange and ring
Item No.
Flange and ring
Item No.
KDA5 FLK ABS
KDA7 FLK ABS
5-1/4"
7-1/2"
Also included:
Height adjustment
collar for KERDIDRAIN grate
Also included:
Lateral adjustment
ring for KERDIDRAIN grate
Additional components included
4x
Inside
corners
2x
1x
Outside
corners
Pipe seal
(3/4" - 20 mm)
Flange and adaptor ring measurements
ABS
1x
1x
KERDI-FIX
sealing and bonding
compound (3.38 oz – 100 ml)
Mixing
valve seal
(4-1/2" - 114 mm)
Flange and adaptor ring measurements
ABS
5-1/4"
11-13/16" - 300 mm
A
11-13/16" - 300 mm
B
2-13/32"
- 60.7 mm
B
4-13/32"
- 111.8 mm
C
2-23/32"
- 69.3 mm
C
4-11/16"
- 118.9 mm
D
5-1/4"
- 133.4 mm
D
7-1/2"
- 191 mm
E
2-29/32"
- 74 mm
E
5-7/64"
- 130 mm
F
1-1/64"
- 25.9 mm
F
3-1/16"
- 77.8 mm
G
2-1/16"
- 52.6 mm
G
3-41/64"
- 92.4 mm
i
The tileable grate and the 6" round/square
grates are NOT compatible with the
5-1/4" ring flange.
16
7-1/2"
A
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
GRATES FOR USE WITH FLANGES WITH 2" OUTLET
4" (100 mm) Grate
®
W! Schluter -KERDI-DRAIN-STYLE
NE
Pure
U.S. Patent No. D831,795
Brushed stainless steel
Brushed nickel
Brushed rose gold
Brushed vintage gold
Item No.
Item No.
Item No.
Item No.
Brushed classic gold
Item No.
KDIF4 GRK EB D8
KDIF4 GRK EBT D8
KDIF4 GRK EBRG D8
KDIF4 GRK EBVG D8
KDIF4 GRK EBCG D8
Matte black
Cream
Greige
Stone grey
Bronze
Matte white
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
KDIF4 GRK TSC D8
KDIF4 GRK TSBG D8
KDIF4 GRK TSSG D8
KDIF4 GRK TSOB D8
KDIF4 GRK MBW D8
KDIF4 GRK MGS D8
Brushed stainless steel
Brushed nickel
Brushed rose gold
Brushed vintage gold
Brushed classic gold
Item No.
Item No.
Item No.
Item No.
Item No.
KDIF4 GRK EB D6
KDIF4 GRK EBT D6
KDIF4 GRK EBRG D6
KDIF4 GRK EBVG D6
KDIF4 GRK EBCG D6
Matte black
Curve
U.S. Patent No. D831,171
Cream
Greige
Stone grey
Bronze
Matte white
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
KDIF4 GRK TSC D6
KDIF4 GRK TSBG D6
KDIF4 GRK TSSG D6
KDIF4 GRK TSOB D6
KDIF4 GRK MBW D6
KDIF4 GRK MGS D6
Brushed stainless steel
Brushed nickel
Brushed rose gold
Brushed vintage gold
Brushed classic gold
Item No.
Item No.
Item No.
Item No.
Item No.
KDIF4 GRK EBD5
KDIF4 GRK EBT D5
KDIF4 GRK EBRG D5
KDIF4 GRK EBVG D5
KDIF4 GRK EBCG D5
Matte black
Floral
U.S. Patent No. D831,172
17
Cream
Greige
Stone grey
Bronze
Matte white
Item No.
Item No.
Item No.
Item No.
Item No.
Item No.
KDIF4 GRK TSC D5
KDIF4 GRK TSBG D5
KDIF4 GRK TSSG D5
KDIF4 GRK TSOB D5
KDIF4 GRK MBW D5
KDIF4 GRK MGS D5
SHOWER SYSTEM
Stainless steel
Stainless steel
Chrome
Oil-rubbed bronze
Item No.
Item No.
Item No.
KD4 GRK E
KD4 GRK EP
KD4 GRK EOB
Nickel
Rose gold
Vintage gold
Classic gold
Item No.
Item No.
Item No.
Item No.
KD4 GRK ET
KD4 GRK ERG
KD4 GRK EVG
KD4 GRK ECG
Anodized aluminum
Brushed nickel anodized aluminum
Brushed copper anodized aluminum
Brushed brass anodized aluminum
Item No.
Item No.
Item No.
KD4 GRK ATGB
KD4 GRK AKGB
KD4 GRK AMGB
Contents
1x
Grate and frame
18
1x
Height adjustment
collar
1x
Lateral adjustment
ring
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
GRATES FOR USE WITH FLANGES WITH 2" OUTLET
4" (100 mm) Grate
Tileable grate
Tileable grate
Item No.
KD4 GRK ECS
Patent pending
Contents
1x
1x
Spacer
Tileable covering
support
GRATES FOR USE WITH FLANGES WITH 2" or 3" OUTLET
6" (150 mm) Grate
Stainless steel
Stainless steel - 6" square
Stainless steel - 6" round
Item No.
Item No.
KD6 GRK E
KD6 GRK RE
Contents
1x
Grate and frame
with integrated height
adjustment collar
19
1x
Lateral adjustment
ring
1x
Lateral adjustment
ring
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
DRAIN KITS — ABS or PVC FLANGE - 2" OUTLET - STAINLESS STEEL GRATE
Schluter®-KERDI-DRAIN
ABS - 2" (50 mm)
PVC - 2" (50 mm)
4" (100 mm) square grate
Stainless steel
KD2/ABS/E
KD2/PVC/E
Contents
1x
1x
Flange
Grate and
frame
4x
Inside
corners
2x
Outside
corners
1x
Height adjustment
collar
1x
Pipe seal
(3/4" - 20 mm)
1x
Lateral
adjustment
ring
1x
Mixing valve seal
(4-1/2" - 114 mm)
ADAPTOR KIT — 5-1/4" ADAPTOR RING - 4" STAINLESS STEEL GRATE
5-1/4" (133.4 mm) adaptor ring
ABS
4" (100 mm) square grate
Stainless steel
KDAR/ABS/E
Contents
1x
Flange
4x
Inside
corners
1x
Grate and
frame
2x
Outside
corners
1x
KERDI-FIX
sealing and bonding compound
20
(3.38 oz – 100 ml)
1x
Height
adjustment
collar
1x
Pipe seal
(3/4" - 20 mm)
1x
Adaptor
ring
1x
Mixing
valve seal
(4-1/2" - 114 mm)
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
ABS or PVC FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS
2" (50 mm) drain outlet
Material
3" (75 mm) drain outlet
Item No.
Material
Item No.
KD2/ABS/FL
KD3/ABS/FL
ABS
ABS
KD2/PVC/FL
KD3/PVC/FL
PVC
PVC
HORIZONTAL
ABS or PVC
FLANGE — 2" OUTLET - WITHOUT SEALS AND CORNERS
2" (50 mm) drain outlet
Material
Item No.
KDH2/ABS/FL
ABS
KDH2/PVC/FL
PVC
STAINLESS STEEL FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS
2" (50 mm) drain outlet
Material
3" (75 mm) drain outlet
Item No.
Material
Item No.
KD2/E/FL
KD3/E/FL
No-hub
No-hub
Also included with stainless steel flanges
KD2/ETH/FL
Threaded
i
When using a flange with 3" outlet, a 6"
grate is recommended.
21
1x
KERDI-FIX
sealing and bonding compound
(3.38 oz – 100 ml)
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
10 PACKS — ABS OR PVC FLANGE - 2" OUTLET
2" (50 mm) drain outlet
Additional components included
Material
Item No.
40x
Inside
corners
KD2 FLK ABS 10
20x
Outside
corners
ABS
10x
Pipe seal
(3/4" - 20 mm)
KD2 FLK PVC 10
10x
Mixing valve seal
(4-1/2" - 114 mm)
PVC
Note: 10 packs are packaged in bulk, not individually boxed.
10 PACKS — ABS FLANGE - 5-1/4" ADAPTOR RING
5-1/4" (133.4 mm) adaptor ring
Additional components included
Flange and ring
Item No.
40x
Outside
corners
10x
10x
Pipe seal
(3/4" - 20 mm)
KDA5 FLK ABS 10
5-1/4"
20x
Inside
corners
Mixing valve seal
(4-1/2" - 114 mm)
10x
KERDI-FIX
sealing and bonding
compound (3.38 oz – 100 ml)
Also included: Height adjustment
collar for KERDI-DRAIN grate
Note: 10 packs are packaged in bulk, not individually boxed.
i
The tileable grate and the 6" round/square
grates are NOT compatible with the
5-1/4" ring flange.
10 PACKS — 4" GRATE - STAINLESS STEEL
Stainless steel
Contents
10x
Grate and frame
Stainless steel
Item No.
KD4 GRK E 10
Note: 10 packs are packaged in bulk, not individually boxed.
22
10x
Lateral adjustment
ring
10x
Height adjustment
collar
SHOWER SYSTEM
Schluter®-KERDI-DRAIN
6" SQUARE CLEAN OUT COVER
The Schluter®-KERDI-DRAIN Clean
Out Cover is a 6” stainless steel cover
available for installations where the KERDIDRAIN bonding flange is to be used in a
cleanout application.
Clean out cover 6"
Item No.
Finish
KD-GR6C-E
Stainless steel
TAMPER PROOF SCREWS
Schluter ®-KERDI-DRAIN
Tamper
Proof Screws are designed as a high
security accessory for the KERDI-DRAIN.
Ideal for loss prevention and anti-theft,
these tamper proof screws are used in
environments where tamper resistance
is desired or required (e.g., healthcare or
education facilities, etc.). Phillips head
screws are included with the KERDIDRAIN. The tamper-proof screws as well
as the driver bit must be purchased
separately.
Tamper proof screw and driver bit
Item No.
Description
KD/TPSCRW
KD/TPWRCH
Tamper proof screw
Driver bit
STRAINER
The Schluter®-KERDI-DRAIN Strainer
is a hair catcher customized to fit inside
the KERDI-DRAIN flange to trap and
collect hair. Simple to remove and clean,
the hair catcher fits discreetly into the
drain to prevent hair clogs that can lead to
blocked pipes.
Strainer for KERDI-DRAIN
23
Item No.
Description
KD-STR
Strainer
SHOWER SYSTEM
Note: There are multiple selections to be made for this product. Begin by selecting the appropriate channel body length
then proceed to grate selection accordingly, keeping in mind there two frame height options for the perforated and closeddesign grates.
Schluter®-KERDI-LINE
CHANNEL BODY
Contents
4x
1x
2x
Inside
corners
Channel body
Outside
corners
1x
Channel support
1x
1x
1x
Pipe seal
(3/4" - 20 mm)
Mixing valve seal
(4-1/2" - 114 mm)
No-hub coupling
Channel body center outlet
Schluter®-KERDI-LINE
Channel body - stainless steel - center outlet
=L
= L1
Channel body off-set outlet
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
51-3/16
55-1/8
59-1/16
62-15/16
66-7/8
70-13/16
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
=L
= L1
L1=
in. - cm
21-11/16
25-5/8
29-9/16
33-1/2
37-7/16
41-3/8
45-5/16
49-1/4
53-3/16
57-1/8
61-1/16
64-15/16
68-7/8
72-13/16
- 55
- 65
- 75
- 85
- 95
- 105
- 115
- 125
- 135
- 145
- 155
- 165
- 175
- 185
Item No.
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
KL1V 60 E
50
60
70
80
90
100
110
120
130
140
150
160
170
180
Channel body - stainless steel - off-set outlet
L=
in. - cm
8" - 20.3 cm
24
L=
in. - cm
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
- 70
- 80
- 90
- 100
- 110
- 120
L1=
in. - cm
29-9/16
33-1/2
37-7/16
41-3/8
45-5/16
49-1/4
- 75
- 85
- 95
- 105
- 115
- 125
Item No.
KL1VO 60 E 70
KL1VO 60 E 80
KL1VO 60 E 90
KL1VO 60 E 100
KL1VO 60 E 110
KL1VO 60 E 120
SHOWER SYSTEM
Schluter®-KERDI-LINE
GRATE ASSEMBLY - BRUSHED STAINLESS STEEL
CONTENTS
1x
1x
Grate
6 design options:
•
Closed-design
•
Perforated
•
Frameless tileable
•
Curve
•
Floral
•
Pure
Closed (A)
3/8"
10 mm
Grate frame with height
adjustment spacers.
See product tables for
frame height options
(not included with
frameless tileable grate).
Perforated (B)
1-27/32"
47 mm
3/8" 10 mm
2-1/8" - 54 mm
=H
=H
2-29/32" - 74 mm
2-29/32" - 74 mm
Grate assemblies - Brushed stainless steel
3/4" (19 mm) frame height for
1/8" to 9/16" (3 mm to 15 mm) -thick coverings
Length =
in. - cm
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
51-3/16
55-1/8
59-1/16
62-15/16
66-7/8
70-13/16
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
25
Closed (A)
Perforated (B)
Item No.
Item No.
KL1AR 19 EB 50
KL1B 19 EB
KL1AR 19 EB 60
KL1B 19 EB
KL1AR 19 EB 70
KL1B 19 EB
KL1AR 19 EB 80
KL1B 19 EB
KL1AR 19 EB 90
KL1B 19 EB
KL1AR 19 EB 100
KL1B 19 EB
KL1AR 19 EB 110
KL1B 19 EB
KL1AR 19 EB 120
KL1B 19 EB
KL1AR 19 EB 130
KL1B 19 EB
KL1AR 19 EB 140
KL1B 19 EB
KL1AR 19 EB 150
KL1B 19 EB
KL1AR 19 EB 160
KL1B 19 EB
KL1AR 19 EB 170
KL1B 19 EB
KL1AR 19 EB 180
KL1B 19 EB
1-1/8" (30 mm) frame height for
1/2" to 1" - (13 mm to 25 mm) -thick coverings
KL1AR 30 EB 50
KL1B 30 EB
KL1AR 30 EB 60
KL1B 30 EB
KL1AR 30 EB 70
KL1B 30 EB
KL1AR 30 EB 80
KL1B 30 EB
KL1AR 30 EB 90
KL1B 30 EB
KL1AR 30 EB 100
KL1B 30 EB
KL1AR 30 EB 110
KL1B 30 EB
KL1AR 30 EB 120
KL1B 30 EB
50
60
70
80
90
100
110
120
130
140
150
160
170
180
50
60
70
80
90
100
110
120
SHOWER SYSTEM
Schluter®-KERDI-LINE
GRATE ASSEMBLY - CHROME
Closed (A)
3/8"
10 mm
1-27/32"
47 mm
Perforated (B)
3/8" 10 mm
2-1/8" - 54 mm
=H
=H
2-29/32" - 74 mm
2-29/32" - 74 mm
Grate assemblies - Chrome
3/4" (19 mm) frame height for
1/8" to 9/16" (3 mm to 15 mm) -thick coverings
Length =
in. - cm
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
Frameless Tileable (D)
Closed (A)
Perforated (B)
Item No.
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
KL1AR 19 EP
Item No.
50
60
70
80
90
100
110
120
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
KL1B 19 EP
50
60
70
80
90
100
110
120
2" - 50 mm
Grate assemblies - Frameless tileable
Item No.
Length =
in. - cm
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
51-3/16
55-1/8
59-1/16
62-15/16
66-7/8
70-13/16
26
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
Frameless Tileable (D)
For use with center outlet
channel body
KL1DRE 50
KL1DRE 60
KL1DRE 70
KL1DRE 80
KL1DRE 90
KL1DRE 100
KL1DRE 110
KL1DRE 120
KL1DRE 130
KL1DRE 140
KL1DRE 150
KL1DRE 160
KL1DRE 170
KL1DRE 180
For use with off-set outlet
channel body
KL1DRO E 70
KL1DRO E 80
KL1DRO E 90
KL1DRO E 100
KL1DRO E 110
KL1DRO E 120
-
SHOWER SYSTEM
Schluter®-KERDI-LINE-STYLE
GRATE ASSEMBLY - BRUSHED STAINLESS STEEL STYLE DESIGNS
2-29/32" (74 mm)
Curve
Floral
4
2-29/32" (74 mm)
4
=H
Pure
2-29/32" (74 mm)
=H
2-1/8" (54 mm)
2-1/8" (54 mm)
2-1/8" (54 mm)
Grate assemblies - Brushed stainless steel
29/32" - 23 mm frame height for 1/4" - 11/16" (6 - 18 mm) -thick coverings
Length =
in. - cm
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
Curve1
Floral2
Pure3
Item No.
Item No.
Item No.
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
KL1IFF 23 EB
50
60
70
80
90
100
110
120
1. U.S. Patent No. D831,168 2. U.S. Patent No. D831,170 3. U.S. Patent No. D831,169
27
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
KL1IFE 23 EB
50
60
70
80
90
100
110
120
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
KL1IFG 23 EB
50
60
70
80
90
100
110
120
SHOWER SYSTEM
Schluter®-KERDI-LINE
PERFORATED GRATE WITH LOCKING MECHANISM
The Schluter®-KERDI-LINE perforated
grate assembly (B) with 3/4" (19 mm) frame
height is available with a locking mechanism
for applications where tamper resistance is
required.
Perforated grate assembly with locking mechanism
Length =
in. - cm
19-11/16
23-5/8
27-9/16
31-1/2
35-7/16
39-3/8
43-5/16
47-1/4
51-3/16
55-1/8
59-1/16
62-15/16
66-7/8
70-13/16
Item No.
- 50
- 60
- 70
- 80
- 90
- 100
- 110
- 120
- 130
- 140
- 150
- 160
- 170
- 180
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
KL1BL
19
19
19
19
19
19
19
19
19
19
19
19
19
19
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
50
60
70
80
90
100
110
120
130
140
150
160
170
180
Note: Driver bit for tamper-proof screws sold separately. Please see page 125.
COVER PLATE
Schluter®-KERDI-LINE-FC
Schluter®-KERDI-LINE-FC is a stainless
steel cover plate for use with the Schluter®KERDI-LINE linear floor drain to create
a seamless look in applications where
multiple drains are installed end to end.
KERDI-LINE-FC is designed for use with
either the solid or perforated grates.
3/8'' - 1/2'' (10 - 12.5 mm)
1-3/8'' - 35 mm
Schluter®-KERDI-LINE-FC Cover Plate
Brushed stainless steel
Chrome
Item No.
Item No.
V / KLEB 35
V / KLEP 35
STRAINER
The Schluter®-KERDI-LINE Strainer is
a hair catcher customized to fit inside the
KERDI-LINE channel body to trap and
collect hair. Simple to remove and clean,
the hair catcher fits discreetly into the
drain to prevent hair clogs that can lead
to blocked pipes.
Strainer for KERDI-LINE
28
Item No.
Description
KL VZ SF
Strainer
5 mm) or
0 mm)
SHOWER SYSTEM
14.1 Schluter®-SHOWERPROFILE-SA
Item No.
H = in. - mm
L = 47-1/4" - 1.2 m
SPSA 50 EB/120
L = 63" - 1.6 m
SPSA 50 EB/160
L = 78-3/4" - 2 m
SPSA 50 EB/200
H = 3/16" (5 mm) or
3/8" (10 mm)
3/8"
(10 mm)
3/8"
(10 mm)
(12.5 mm)
1/4 - 6
1-3/16 - 30
3/16 - 5
1/4 - 6
1-1/2 - 38
3/16 - 5
1/4 - 6
1-13/16 - 46
H = in. - mm
L = 47-1/4" - 1.2 m
SPSB 100 EB/120
SPSB 125 EB/120
L = 63" - 1.6 m
SPSB 100 EB/160
SPSB 125 EB/160
L = 78-3/4" - 2 m
SPSB 100 EB/200
SPSB 125 EB/200
H2 = in. - mm
3/16 - 5
®
H = 1/2"
14.1 Schluter
-SHOWERPROFILE-SB
Item No.
H = 1/2"
(12.5 mm)
Two-part tapered edging profile
H1 = in. - mm
Two-part tapered edging profile
H1 = in. - mm
H2 = in. - mm
3/8 - 10
1/2 - 12.5
3/8 - 10
3/8 - 10
1-11/32 - 34
1-11/32 - 34
3/8 - 10
1/2 - 12.5
3/8 - 10
3/8 - 10
1-21/32 - 42
1-21/32 - 42
3/8 - 10
1/2 - 12.5
3/8 - 10
3/8 - 10
2 - 50
2 - 50
Note: Other sizes available. Contact Customer Service for price and availability.
= H2
2%
= H1
=L
14.1 Schluter®-SHOWERPROFILE-R
Item No.
Two-part wall transition profile
Height
L = 39" - 1 m
SPRA 23 EB/100
SPRA 33 EB/100
29/32" - 1-3/8" (23 - 35 mm)
1-5/16" - 1-25/32" (33 - 45 mm)
SPRA 23 EB/140
SPRA 33 EB/140
29/32" - 1-3/8" (23 - 35 mm)
1-5/16" - 1-25/32" (33 - 45 mm)
L = 55" - 1.4 m
25/32" (20 mm)
=H
7/8" (22mm) /
1-1/4" (32 mm)
H = variable
Note: When the SHOWERPROFILE-S/-R is not used with the Schluter®-Shower System the profile is covered under the Schluter®-Systems Wall and Countertop Profiles
5-Year Limited Warranty.
29
SHOWER SYSTEM
17.1 Schluter®-SHELF-E
Triangular corner shelf
210 mm - 8-1/4"
MBW
210 mm - 8-1/4"
210 mm - 8-1/4"
210 mm - 8-1/4"
MGS
EB
Schluter®-SHELF-E - FLORAL
MGS
EB
Schluter®-SHELF-E - CURVE
Item No.
Finish
Item No.
Finish
SES1 D5 EB
Brushed stainless steel
SES1 D6 EB
Brushed stainless steel
SES1 D5 MBW
Matte white
SES1 D6 MBW
Matte white
SES1 D5 MGS
Matte black
SES1 D6 MGS
Matte black
SES1 D5 TSBG
Greige
SES1 D6 TSBG
Greige
SES1 D5 TSC
Cream
SES1 D6 TSC
Cream
SES1 D5 TSOB
Bronze
SES1 D6 TSOB
Bronze
SES1 D5 TSSG
Stone grey
SES1 D6 TSSG
Stone grey
TSBG
TSC
TSOB
TSBG
TSC
TSOB
TSSG
TSSG
17.1 Schluter®-SHELF-E
Pentagonal corner shelf
195 mm - 7-11/16"
MGS
EB
Schluter®-SHELF-E - FLORAL
Item No.
Finish
SES2 D5 EB
Brushed stainless steel
SES2 D5 MBW
Matte white
SES2 D5 MGS
Matte black
75 mm - 3"
TSBG
TSC
Schluter®-SHELF-E - CURVE
Item No.
Finish
SES2 D6 EB
Brushed stainless steel
SES2 D6 MBW
Matte white
SES2 D6 MGS
Matte black
SES2 D6 TSBG
Greige
SES2 D6 TSC
Cream
SES2 D6 TSOB
Bronze
SES2 D6 TSSG
Stone grey
TSOB
Greige
SES2 D5 TSC
Cream
SES2 D5 TSOB
Bronze
SES2 D5 TSSG
Stone grey
MGS
EB
75 mm - 3"
SES2 D5 TSBG
MBW
195 mm - 7-11/16"
75 mm - 3"
MBW
195 mm - 7-11/16"
75 mm - 3"
195 mm - 7-11/16"
30
MBW
TSSG
TSBG
TSC
TSOB
TSSG
SHOWER SYSTEM
17.1 Schluter®-SHELF-E
Quadrilateral corner shelf
62 mm - 2-7/16"
62 mm - 2-7/16"
MBW
MBW
295 mm - 11-5/8"
295 mm - 11-5/8"
EB
EB
154 mm - 6-1/16"
154 mm - 6-1/16"
MGS
Schluter®-SHELF-E - FLORAL
MGS
Schluter®-SHELF-E - CURVE
Item No.
Finish
Item No.
Finish
SES3 D5 EB
Brushed stainless steel
SES3 D6 EB
Brushed stainless steel
SES3 D5 MBW
Matte white
SES3 D6 MBW
Matte white
SES3 D5 MGS
Matte black
SES3 D6 MGS
Matte black
SES3 D5 TSBG
Greige
SES3 D6 TSBG
Greige
SES3 D5 TSC
Cream
SES3 D6 TSC
Cream
SES3 D5 TSOB
Bronze
SES3 D6 TSOB
Bronze
SES3 D5 TSSG
Stone grey
SES3 D6 TSSG
Stone grey
TSBG
TSC
TSSG
TSBG
TSC
TSSG
TSOB
TSOB
17.1 Schluter®-SHELF-N
Niche shelf
87 mm - 3-7/16"
87 mm - 3-7/16"
300 mm - 11-13/16"
300 mm - 11-13/16"
EB
MBW
MGS
Schluter®-SHELF-N - FLORAL
MBW
MGS
TSBG
TSC
TSSG
TSOB
Schluter®-SHELF-N - CURVE
Item No.
Finish
Item No.
Finish
SNS1 D5 EB
Brushed stainless steel
SNS1 D6 EB
Brushed stainless steel
SNS1 D5 MBW
Matte white
SNS1 D6 MBW
Matte white
SNS1 D5 MGS
Matte black
SNS1 D6 MGS
Matte black
SNS1 D5 TSBG
Greige
SNS1 D6 TSBG
Greige
SNS1 D5 TSC
Cream
SNS1 D6 TSC
Cream
SNS1 D5 TSOB
Bronze
SNS1 D6 TSOB
Bronze
SNS1 D5 TSSG
Stone grey
SNS1 D6 TSSG
Stone grey
TSBG
TSSG
31
EB
TSC
TSOB
SHOWER SYSTEM
17.1 Schluter®-SHELF-W
Wall shelf
EB
115 mm - 4-1/2"
115 mm - 4-1/2"
EB
300 mm - 11-13/16"
300 mm - 11-13/16"
Schluter -SHELF-W - FLORAL
Schluter -SHELF-W - CURVE
®
Item No.
Finish
SWS1 D5 EB
Brushed stainless steel
SWS1 D5 MBW
Matte white
Matte black
SWS1 D5 TSBG
Greige
SWS1 D5 TSC
Cream
SWS1 D5 TSOB
Bronze
SWS1 D5 TSSG
Stone grey
50 mm - 2"
SWS1 D5 MGS
®
MBW
MGS
TSBG
TSC
Item No.
Finish
SWS1 D6 EB
Brushed stainless steel
SWS1 D6 MBW
Matte white
SWS1 D6 MGS
Matte black
SWS1 D6 TSBG
Greige
SWS1 D6 TSC
Cream
SWS1 D6 TSOB
Bronze
SWS1 D6 TSSG
Stone grey
MBW
MGS
TSBG
TSC
115
m
4-1/2 m
"
300
mm
"
3/16
- 11-1
TSSG
TSSG
TSOB
TSOB
4 mm - 5/32"
32
SHOWER SYSTEM
1
7
3
3
8
6
2
4
6
5
4
1
5
2
7
8
Schluter®-KERDI-SHOWER-KIT
Includes
2
3
4
5
6
7
8
KERDI-SHOWER-T/-TS/-TT
KERDI-BOARD-SC
KERDI-BOARD-SC
KERDI 10 M
KERDI-BAND
KERDI-DRAIN
KERDI-KERECK-F
KERDI-SEAL-PS
KERDI-SEAL-MV
Shower Tray
Shower Curb 48" x 6" x 4-1/2"
Shower Curb 38" x 6" x 4-1/2"
Waterproofing membrane 3' 3" x 33' = 108 ft2
Waterproofing strip 5" x 33'
Flange with 2" (50 mm) outlet and stainless steel grate (E)
1
1
152 cm - 60"
97 cm - 38"
122 cm - 48"
Grate
finish
ABS
E
PVC
E
Item No.
KSK 965 1525 ABS E
KSK 965 1525 PVC E
2
1
1
1
4 inside and 2 outside
38" x 60" Kit - ABS or PVC
Drain
Material
1
1
1
1
152 cm - 60"
48" x 48" Kit - ABS or PVC
KSK 1220 ABS E
KSK 1220 PVC E
1
1
Preformed waterproofing corners
Pipe seal (3/4" - 20 mm)
Mixing valve seal (4-1/4" - 114 mm)
122 cm - 48"
Item No.
48" x 48" 38" x 60"
97 cm - 38"
1
Quantity
Description
38" x 60" Kit off-center - ABS or PVC
Drain
Material
Grate
finish
ABS
E
PVC
E
Item No.
KSK 965 1525S ABSE
KSK 965 1525S PVCE
Drain
Material
Grate
finish
ABS
E
PVC
E
Note: Tray features off-center drain placement:
10" (25.4 cm) o.c. from end of tray.
33
SHOWER SYSTEM
7
3
1
3
8
6
5
4
1
4
2
5
2
6
8
7
Schluter®-KERDI-SHOWER-KIT - WITHOUT THE GRATE
Includes
1
2
3
4
5
6
7
8
KERDI-SHOWER-T/-TS/-TT
KERDI-BOARD-SC
KERDI-BOARD-SC
KERDI 5 M
KERDI 10 M
KERDI 12 M
KERDI-BAND
KERDI-DRAIN Flange
KERDI-KERECK-F
KERDI-SEAL-PS
KERDI-SEAL-MV
48" x 48" 38" x 60" 48" x 72" 72" x 72"
Shower Tray
Shower Curb 48" x 6" x 4-1/2"
Shower Curb 38" x 6" x 4-1/2"
Waterproofing membrane 3' 3" x 16' 5" = 54 ft2
Waterproofing membrane 3' 3" x 33' = 108 ft2
Waterproofing membrane 3' 3" x 39' 4" = 128 ft2
Waterproofing strip 5" x 33'
Flange with 2" (50 mm) outlet
Item No.
KSK 965 1525 ABS
KSK 965 1525 PVC
Drain
Material
ABS
PVC
183 cm - 72"
122 cm - 48"
KSK 1220 1830 ABS
KSK 1220 1830 PVC
72" x 72" Kit - ABS or PVC
Drain
Material
ABS
PVC
1
2
2
2
1
1
1
1
1
2
1
1
4 inside and 2 outside
1
1
2
1
Item No.
KSK 1830 ABS
KSK 1830 PVC
38" x 60" Kit off-center - ABS or PVC
Drain
Item No.
Material
KSK 965 1525S ABS
ABS
KSK 965 1525S PVC
PVC
Note: Tray features off-center drain placement:
10" (25.4 cm) o.c. from end of tray.
183 cm - 72"
48" x 72" Kit - ABS or PVC
1
97 cm - 38"
38" x 60" Kit - ABS or PVC
Drain
Material
ABS
PVC
183 cm - 72"
Item No.
1
1
1
152 cm - 60"
97 cm - 38"
122 cm - 48"
KSK 1220 ABS
KSK 1220 PVC
1
152 cm - 60"
48" x 48" Kit - ABS or PVC
Item No.
1
1
Preformed waterproofing corners
Pipe seal (3/4" - 20 mm)
Mixing valve seal (4-1/2" - 114 mm)
122 cm - 48"
34
Quantity
Description
Drain
Material
ABS
PVC
SHOWER SYSTEM
1
3
3
4
1
2
2
4
Schluter®-KERDI-SHOWER-KIT - WITHOUT THE DRAIN
Includes
1
2
3
4
KERDI-SHOWER-T/-TS/-TT
KERDI-BOARD-SC
KERDI-BOARD-SC
KERDI 5 M
KERDI 10 M
KERDI 12 M
KERDI-BAND
Description
Shower Tray
Shower Curb 48" x 6" x 4-1/2"
Shower Curb 38" x 6" x 4-1/2"
Waterproofing membrane 3' 3" x 16' 5" = 54 ft2
Waterproofing membrane 3' 3" x 33' = 108 ft2
Waterproofing membrane 3' 3" x 39' 4" = 128 ft2
Waterproofing strip 5" x 33'
Tray size
48"
38"
38"
48"
72"
35
x
x
x
x
x
48"
60"
60" off-center drain
72"
72"
Quantity
48" x 48" 38" x 60" 48" x 72" 72" x 72"
1
1
1
1
1
2
2
2
1
1
1
1
1
1
Item No.
KSK 1220
KSK 965 1525
KSK 965 1525S
KSK 1220 1830
KSK 1830
1
2
2
SHOWER SYSTEM
Schluter®-KERDI-TUBKIT
1
Item No.
1
2
KKB7
3
4
5
2
Includes
KERDI 7M
KERDI-BAND
KERDI-SEAL-PS
KERDI-SEAL-MV
KERDI-FIX
Description
Waterproofing membrane 3' 3" x 23' = 75 ft2
Waterproofing strip 5" x 16' 5"
Pipe seal 3/4"
Mixing valve seal 4-1/2"
Sealing and bonding compound, bright white
Quantity
1
1
1
1
1
5
3
4
Product Listings and Certifications Table
Schluter®-KERDI-DRAIN - Listings and Certifications
Grate - 4" (100 mm)
Grates
Flanges
Design 1
Stainless steel
(All finishes except EOB)
Design 1
Design 2
Stainless steel Anodized aluminum
(All finishes)
EOB
Grate - 6" (150 mm)
Tileable
STYLE - Pure, Curve and Floral
Stainless steel
Stainless steel
(All finishes)
Square
6E
Round
6RE
Cover
6CE
2" PVC
1
-
1
1
1
1
1
2
2" ABS
1
-
1
1
1
1
1
2
2" PVC Horizontal
1
-
1
1
1
1
1
2
2" ABS Horizontal
1
-
1
1
1
1
1
2
2" Stainless steel
1
-
1
1
1
1
1
2
2" Stainless steel
Threaded
1
-
1
1
1
1
1
2
3" PVC
-
-
-
-
-
1
1
2
3" ABS
-
-
-
-
-
1
1
2
3" Stainless steel
-
-
-
-
-
1
1
2
5-1/4" Adaptor
-
-
-
-
-
-
-
-
7-1/2" Adaptor
-
-
-
-
-
-
-
-
Schluter®-KERDI-LINE
Bonding Flange
Center outlet - 19-11/16" - 47-1/4" (50 cm - 120 cm)
Center outlet - 51-3/16" - 70-13/16" (130 cm - 180 cm)
Off-set outlet - 27-9/16" - 47-1/4" (70 cm - 120 cm)
Grate
A
B
D
Floral (E)*
Curve (F)*
Pure (G)*
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Various configurations of KERDI-DRAIN and KERDI-LINE are listed by ICC-ES (Report No. PMG-1204), UPC®, and CSA as shown in the table above.
1 - Listed by ICC-ES (Report No. PMG-1204), UPC®, and CSA.
2 - Listed by CSA
For copies of these documents, please contact Schluter®-Systems at 800-472-4588 (USA) or 800-667-8746 (Canada) or by email at [email protected] Links to the documents can also be accessed at www.schluter.com.
36
Schluter®-Shower System 10-Year Limited Warranty
LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter®-Shower System 10-Year Limited Warranty (the “Limited Warranty”),
Schluter Systems warrants that its Schluter®-Shower System (the “Products”) will be free from manufacturing defects and will perform as described in the Schluter®-Shower System
Installation Handbook and Schluter® Waterproofing Membranes Technical Data Sheet (collectively, the “Written Materials”1) for a period of ten (10) years from the date of purchase when
installed and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written Materials in effect at the
time of installation.
For the purposes of this Limited Warranty, “Products” are defined to include, as applicable in the original installation: Schluter®-KERDI-SHOWER pre-fabricated shower trays,
Schluter®-KERDI/-DS waterproofing membranes, Schluter®-KERDI-BOARD waterproof building panels, Schluter®-KERDI-BAND waterproofing strips, Schluter®-KERDI-DRAIN and
Schluter®-KERDI-LINE drains, Schluter®-KERDI-BOARD-SC shower curbs, Schluter®-KERDI-BOARD-SB shower benches, Schluter®-KERDI-SHOWER-SR shower ramp, Schluter®KERDI-BOARD-SN shower niches, Schluter®-KERECK-F waterproofing corners, Schluter®-KERDI-KERS waterproofing corners, Schluter®-KERDI-KM, Schluter®-DILEX profiles, Schluter®SHOWERPROFILES, Schluter®-KERDI-LINE-FC cover plate, Schluter®-SHELF, Schluter®-KERDI-SEAL-PS/-MV seals, and/or Schluter®-KERDI-FIX adhesive/sealant; “Owner” is defined
as the original end user of the property in which the Products are installed; and “Tile Assembly” is defined to include the Products, non-reusable tile surfaces, and applicable setting and
grouting materials.
This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for determining
the suitability of the Products for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to ensure the suitability of the
Products, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly.
RESOLUTION: If the Products are installed and used in accordance with the terms and conditions as described hereinabove and such Products are proven defective within the applicable
warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of the Tile Assembly or (b) pay
an amount not to exceed the original square foot cost of the installation of the Tile Assembly verified to be defective. Due to conditions beyond the control of Schluter Systems (e.g., color
and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific tile, stone, or other tiling materials used in the
original installation. In such event, substantially similar materials may be substituted.
EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary,
or consequential damages, including lost profits, arising out of or otherwise connected to the failure of the Products or Tile Assembly, regardless of any strict liability or active or passive
negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising out
of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate, improper
preparation or other failure of subfloor/substrate, faulty or negligent penetration of the Products or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to
maintain the Products, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise),
efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of
texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to the Products (e.g. excess point loading, overvoltage).
This Limited Warranty excludes exterior applications, unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director.
This Limited Warranty is conditioned and will be considered null and void and Schluter Systems will have the right to refuse any claims if: (a) the Products have been improperly stored or
installed, (b) any non-Schluter Systems product is substituted for a Schluter Systems component in a Schluter®-Shower System, or (c) the Products are subject to abusive or abnormal
use, lack of maintenance, or used in a manner other than that for which the Products were designed or in any way contrary to the Written Materials
DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions, expressed or
implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE (as limited to
such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES ARISING BY OPERATION OF
LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR STATEMENT BY ANY EMPLOYEE OR AGENT
OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED WARRANTY OR AUTHORIZED IN
WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies
contained herein are the only remedies available for breach of this Limited Warranty. This Limited Warranty extends only to the Owner and is not transferable or assignable unless
authorized by written agreement and signed by the Schluter Systems Technical Services Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives
you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes
or modifications of any terms or conditions of this Limited Warranty are permitted unless duly authorized in writing by the Schluter Systems Technical Services
Director. This Limited Warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems
relative to the Products or the application of the Products and shall apply to any installation occurring on or after January 1, 2018. If the Schluter®-Shower System is used in conjunction
with other Schluter products, a different Schluter warranty may apply. For the most current information and materials regarding Schluter Systems warranties and programs, please visit
https://www.schluter.com/schluter-us/en_US/downloadfiles.
MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems2 with written notice within thirty (30) days of any alleged defect in the Products
covered by this Limited Warranty, together with date and proof of purchase of such Products and/or all of its components and name and address of all installers and all invoices related
to the original installation, failing which this Limited Warranty shall have no legal effect3. Schluter Systems reserves the right at its election and as a condition of this Limited Warranty to
inspect the alleged failed and/or defective Products.
All U.S. Claims must be sent to: All Canadian Claims must be sent to:
Schluter Systems L.P.
Attn: Warranty Claims Dept.
194 Pleasant Ridge Road
Plattsburgh, NY 12901-5841 Schluter Systems (Canada), Inc.
Attn: Warranty Claims Dept.
21100 chemin Ste-Marie
Ste-Anne-de-Bellevue, QC H9X 3Y8
If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control.
This Limited Warranty is limited to sales of the Products made in and intended for use in the United States and Canada. For the purposes of this Limited Warranty, Schluter Systems L.P. shall offer warranty coverage
to Owners located in the United States, and Schluter Systems (Canada) Inc. shall offer warranty coverage to Owners located in Canada.
3
In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If
the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American
Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the
parties hereto.
1
2
37
Schluter®-Systems Lifetime Thin-Set System Extended Limited Warranty
LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Lifetime Thin-Set System Extended Limited Warranty (the “Limited Warranty”),
Schluter Systems warrants that a Thin-Set System (defined hereafter) will be free from manufacturing defects and will perform as described in the applicable installation handbook(s)
and/or technical data sheet(s) (collectively, the “Written Materials1” ) for the lifetime (defined hereafter) of such Thin-Set System when installed in a Residential or Commercial
application (defined hereafter) and used in accordance with the terms and conditions of the Written Materials and industry standard guidelines that are not in conflict with the Written
Materials in effect at the time of installation. In order to extend warranty coverage for Schluter® DITRA® or DITRA®-XL uncoupling membranes, Schluter®-Shower System, Schluter®
KERDI® or KERDI®-DS waterproofing membranes, or Schluter® DITRA-HEAT™ or Schluter® DITRA-HEAT-DUO™ uncoupling membrane to lifetime coverage under this Lifetime ThinSet System Extended Limited Warranty, Owner must complete and submit the Thin-Set System Registration to Schluter Systems, available at www.schluter.com, or submit proof
of purchase and installation information (including installation date, installer’s name and address) to Schluter Systems at the address provided hereafter within ninety (90) days of
installation.
For the purposes of this Limited Warranty, a “Thin-Set System” is defined as Schluter® DITRA® or DITRA®-XL uncoupling membranes, Schluter®-Shower System, Schluter®KERDI®-BOARD within a Schluter®-Shower System, Schluter® KERDI® or KERDI®-DS waterproofing membranes, or Schluter® DITRA-HEAT™ or Schluter® DITRA-HEAT-DUO™
uncoupling membrane installed with Schluter SET®, Schluter ALL-SET®, or Schluter FAST-SET® thin-set mortar; “Owner” is defined as the original end user of the property in which
a Thin-Set System is installed; “Lifetime” is defined as that period of time that the original Thin-Set System installation remains unchanged and under the ownership of the Owner;
“Residential” applications are defined to include Thin-Set System installations in single family detached residential dwellings; and “Commercial” applications are defined to include
Thin-Set System installations in multi-family residential dwellings (e.g., apartments, condominiums, cooperatives, and timeshares). Thin-Set System installations in public places,
commercial establishments and other applications may be afforded lifetime coverage under this Limited Warranty on a case by case basis as determined by the Schluter Systems
Technical Services Director.
This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any circumstances for
determining the suitability of a Thin-Set System for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced and professional installer to
ensure the suitability of a Thin-Set System, subfloor/substrate and all building materials in the installation and that the Written Materials are followed properly.
RESOLUTION: If a Thin-Set System is installed and used in accordance with the terms and conditions as described hereinabove and such Thin-Set System is proven defective
within the applicable warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or replace the failed portion of
the Thin-Set System or (b) pay an amount not to exceed the original square foot cost of the installation of the Thin-Set System verified to be defective. Due to conditions beyond the
control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems cannot guarantee or warrant an exact match to the specific
tile, stone, or other flooring materials used in the original installation. In such event, substantially similar materials may be substituted.
All U.S. Claims shall be sent to: Schluter Systems L.P.
Attn: Warranty Claims Dept.
194 Pleasant Ridge Road
Plattsburgh, NY 12901-5841 All Canadian Claims shall be sent to:
Schluter Systems (Canada), Inc.
Attn: Warranty Claims Dept.
21100 chemin Ste-Marie
Ste-Anne-de-Bellevue, QC H9X 3Y8
If there are any conflicting terms between any Written Materials, the most recently updated document shall be deemed to control.
In the event that Owner fails to provide such required invoices relating to the original installation, Schluter Systems shall pay Owner an amount equal to the average, reasonable costs of a comparable installation. If
the parties fail to agree on such amount, such dispute shall promptly, and in the first instance, be submitted: (a) if a U.S. claim, to arbitration in Clinton County, New York, in accordance with the rules of the American
Arbitration Association, or (b) if a Canadian claim, in the Province of Quebec, Canada, in accordance with the ADRIC Arbitration Rules. Any outcome of such arbitration proceeding shall be final and binding upon the
parties hereto.
1
2
Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-472-4588 • Fax: 800-477-9783
Schluter Systems (Canada) Inc. • 21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8 • Tel.: 800-667-8746 • Fax: 877-667-2410
www.schluter.com
This technical data sheet is subject to change without notice. Please visit www.schluter.com for the latest version.
11/2019
MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems with written notice within thirty (30) days of any alleged defect in a
Thin-Set System covered by this Limited Warranty, together with date and proof of purchase of such Thin-Set System and/or all of its components and name and address of all
installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect . Schluter Systems reserves the right at its election and as a
condition of this Limited Warranty to inspect the alleged failed and/or defective Thin-Set System.
553107
DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or conditions,
expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law. ANY IMPLIED WARRANTIES
ARISING BY OPERATION OF LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION, PROMISE, AFFIRMATION OR STATEMENT
BY ANY EMPLOYEE OR AGENT OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED
WARRANTY OR AUTHORIZED IN WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether
expressed or implied. The remedies contained herein are the only remedies available for breach of this Limited Warranty. Schluter Systems excludes and in no event shall have any
liability for any indirect, special, incidental, punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to failure of a Thin-Set System.
This Limited Warranty extends only to the Owner and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services
Director or otherwise prohibited by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other
restrictions of implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty
are permitted unless duly authorized in writing by the Schluter Systems Technical Services Director. This Limited Warranty shall supersede and replace any and all prior
oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to a Thin-Set System or the application of a Thin-Set System and
shall apply to any installation occurring on or after March 13, 2017. For the most current information and materials regarding Schluter Systems warranties and programs, please visit
https://www.schluter.com/schluter-us/en_US/downloadfiles.
© 2019 Schluter Systems L.P. and affiliates. All rights reserved.
EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental, punitive, exemplary,
or consequential damages, including lost profits, arising out of or otherwise connected to the failure of a Thin-Set System, regardless of any strict liability or active or passive
negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty further excludes any loss or damage arising
out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply with the Written Materials, inadequate subfloor/substrate,
improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of a Thin-Set System or subfloor/substrate, intentional acts of destruction, structural
failure, misuse of or failure to maintain a Thin-Set System, normal wear and tear, scratches, dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning
products, abrasive agents or otherwise), efflorescence and shading which are a natural occurrence with cementitious materials and are not considered a defective condition for the
purposes of this Limited Warranty, variations of texture, color or shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated
to a Thin-Set System (e.g. excess point loading, overvoltage). This Limited Warranty excludes exterior, submerged and steam room applications and further excludes applications
using glass tile, resin-backed tile, and/or moisture sensitive stone unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director.
Schluter® DITRA-HEAT™-E-HK heating cables and Schluter® DITRA-HEAT™-E thermostats are specifically excluded from coverage under this Limited Warranty. Any substitution of
a non-Schluter Systems product for a Schluter Systems component in a Thin-Set System voids this Limited Warranty.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement