Racor PLB-4R 4-Bike Black Steel Bike Stand Operating Guide

Add to my manuals
3 Pages

advertisement

Racor PLB-4R 4-Bike Black Steel Bike Stand Operating Guide | Manualzz

H O M E S T O R A G E P R O D U C T S

FREE STANDING

BIKE RACK | PLB-4R

INSTRUCTIONS

WWW.RACORSTORAGESOLUTIONS.COM

TOOLS REQUIRED

Hex wrench

Allen wrench

(included)

PARTS LIST

x2 Curved base x1 V frame x1 Straight bottom section x1 Straight top section x8 Universal arms x6 Rubber feet x4 Long hex socket cap screw x8 Short hex socket cap screw

WARNING

Please read installation instructions carefully prior to installing. Before using the product thoroughly test the fully-weighted product (with equipment in place) to ensure the product has been installed properly. Do not allow children to play on product. ITW Brands is not responsible for any damage resulting from improper installation, overloading or product failure.

E

A

D

C

F

1 Set curved base sections A and B on floor and slide into support section C . Use eight screws to fasten.

To protect floor attach feet (6 F ) to bottom of assembly, as shown.

2 Slide straight section D and E over support section C as shown, making sure section E is on top.

B

3 Fasten using 4 screws and nuts.

4

Fasten universal arms into key holes as shown. Push in and then down to secure.

This step will take some adjustment to each arm as bikes will vary in size.

A USING THE BIKE RACK

Fitting all four bikes on at once will require adjustments for all to fit properly. Take your time and make all adjustments carefully.

Make sure you place the same bike on the same arms in the same direction each time you store the bike.

Limited Warranty: These products are sold “as is” without any express or implied warranties. ITW Brands’ sole liability, if any, shall be to replace this product or refund the purchase price. The performance of these products is subject to variable conditions and maximum load ratings are shown for comparison purposes only.

PLB-4R

Made in China

ITW Brands, A division of Illinois Tool Works Inc.

955 National Parkway, Suite 95500

Schaumburg, IL 60173

800-783-7725 www.RacorStorageSolutions.com

Email: [email protected]

© 2011 Illinois Tool Works Inc.

Racor and Racor logo are registered trademarks of Illinois Tool Works Inc.

H O M E S T O R A G E P R O D U C T S

Thank you for purchasing this product.

Racor storage and organizational solutions will inspire and put you back in control of your space. Racor has the largest variety of solutions to organize and store bikes, sports equipment, lawn and garden supplies, bulky items like ladders and totes, and clutter items like tools. Please visit www.RacorStorageSolutions.com for other great organizational products.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What tools are required for assembly?
You will need a hex wrench and an Allen wrench.
What are the steps for assembling the bike rack?
1. Set the curved base sections on the floor and slide them into the support section. Secure with screws. 2. Slide the straight sections over the support section. 3. Fasten the straight sections with screws and nuts. 4. Fasten the universal arms into the keyholes.
How do I adjust the universal arms to fit different bikes?
Push the arms into the keyholes and then down to secure. Some adjustment may be needed for each arm as bikes vary in size.
How many bikes can the rack hold?
The rack can hold up to four bikes.
What is the maximum weight capacity of the bike rack?
The maximum weight capacity is not specified in the manual.
What is the warranty on the bike rack?
These products are sold “as is” without any express or implied warranties. ITW Brands’ sole liability, if any, shall be to replace this product or refund the purchase price.

Related manuals

Download PDF

advertisement