Platform Bed Contains One (1) Bed and Hardware IMPORTANT NOTE: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. PARTS AND HARDWARE LIST A. Headboard B. Footboard (1 pc) C. Frame (1 pc) D. Decorative Top Piece (4 pcs) (1 pc) E. Corner Leg (4 pcs) ASSEMBLY INSTRUCTIONS STEP 1 Set the Frame (Part C) on its side and unfold it. A (Continued on back) ASSEMBLY INSTRUCTIONS (CONTINUED) STEP 2 STEP 3 Insert the Corner Legs (Part E) into the Headboard (Part A) and Footboard (Part B). Attach the Headboard (Part A) and the Footboard (Part B) to the Frame (Part C) by sliding the bolts on the ends of the frame into the slots on the Headboard and Footboard. STEP 4 STEP 5 Rotate the two legs (one at the head of the bed and one at the foot of the bed) until they lock into place. Note that these two legs will be slightly off the floor to allow for uneven floors. Set the frame up with the legs resting on the floor. A Install the Decorative Top Pieces (Part D) into the Headboard (Part A) and Footboard (Part B). Your Platform Bed is now completely set up and ready for use.