SNOWBEAR 324-223 250 lbs. Hitch Mounted Salt Spreader with Wireless Remote for 2 in. Receivers Troubleshooting Guide

SNOWBEAR 324-223 250 lbs. Hitch Mounted Salt Spreader with Wireless Remote for 2 in. Receivers Troubleshooting Guide
Owner’s Manual
Tailgate Spreader Troubleshooting
PROBLEM
CAUSES
1.
2.
3.
Spreader does not
run
4.
5.
6.
7.
8.
Electrical connection
Bad motor
Loose wire connection to
switch/receiver
Corrosion
Fuse blown
Check battery
Jammed auger
Headlights on vehicle not turned on
(wiring harness typically part of light
circuit)
HOW TO CORRECT
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
Material will not flow
3.
4.
Spreader hopper is empty
Material has solidified, stuck to wall,
material obstruction
Auger is spinning in reverse
Auger broke
1.
2.
3.
4.
Spreader does not
respond to key fob
1.
2.
3.
4.
5.
6.
Plug not secure
No vehicle power to connector
Key fob battery low
Range issue
Control connection
Headlights on vehicle not turned on
1.
2.
3.
4.
5.
6.
15 | P a g e
Check 4-pin plug and make sure it
is securely plugged in
Contact distributor for
replacement
Open electrical enclosure &
inspect switch and receiver
connections, fix where needed
Check all electrical connections
for corrosion, fix if necessary
Locate blown fuse and replace
Load test battery. Recharge
vehicle's battery if required
Unplug spreader and remove jam.
If auger damaged, fix or replace
Turn vehicle headlights on
Refill spreader hopper with desired
material
With spreader unplugged, use
screwdriver or rigid rod to breakup material until proper
consistency
Change polarity of motor
Auger needs to be replaced
Fully seat 4-pin connector plug
Ensure vehicle is running and
power is going to plug connector
Replace battery
Try key fob at close range to
spreader, if unit works, replace
battery. If not, check electrical
connections
Remove electrical cover and check
all connections
Turn vehicle headlights on
SnowBear® Tailgate Spreader (TGS-325)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement