Wen 40413, 40413ST, 40413ST-6 Product information

Wen 40413, 40413ST, 40413ST-6 Product information
MAINTENANCE
BATTERY
1. Make sure the battery is fully charged before storage in order to maximize the life of the battery.
2. Do not store the battery pack on the tool.
3. After charging, the battery pack may be stored in the charger, as long as the charger is not plugged in.
CHARGER
1. Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed cavity or onto
the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, and do not place the charger
in wet conditions.
2. Unplug the charger when there is no battery in it.
3. Fully charge the battery before placing it in storage.
4. Store the charger at normal room temperature. Do not store it in excessive heat. Do not use the charger in
direct sunlight or in damp conditions. Do not charge outside. Recharge at room temperature. If the battery is hot,
allow it to cool down before recharging.
EXPLODED VIEW AND PARTS LIST
No. Part Number
Description
Qty
1
40401
40V Battery
1
2
40413-002
Screw
22
3
40413-003 Right Battery Housing 1
4
40413-004
PCB
1
5
40413-005
Trigger
1
6
40413-006
Base Plate
2
7
40413-007
Spring
1
8
40413-008 Left Battery Housing 1
9
40413-009
Battery Latch
1
10 40413-010
Pin
1
11 40413-011
Torsional Spring
1
12 40413-012
Shaft
1
13 40413-013
Spring
1
14 40413-014
Safety
1
15 40413-015
Cable Clamp
1
16 40413-016
Tube Assembly
1
17 40413-017
Wiring Harness
1
18 40413-018
Wire Casing
4
19 40413-019
Right Housing
1
20 40413-020
Left Housing
1
21 40413-021
The wire frame
1
22 40413-022
Motor Assembly
1
23 40413-023
Flange
1
14
No. Part Number
Description
Qty
24
40413-024
Screw
2
25
40413-025
Spindle
1
26
Handle Assembly
1
26.1
Knob
1
40413-026
26.2
Handle
1
26.3
Screw
1
27
Debris Shield Assembly 1
27-1
Shield
1
27-2 40413-027
Blade
1
27-3
Screw
2
27-4
Blade Guide
1
28
40413-028
Screw
1
29
Cutter Head Assembly 1
29.1
Rivet
2
29.2
Head Housing
1
29.3
Seat
1
29.4 40413-029
Spring
1
29.5
Skate
1
29.6
Cutting Wire
1
29.7
Spool
1
29.8
Cap
1
30
40400
Charger
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement