Southern Enterprises HD889030 Leonard Louvered Warm Walnut Storage Entertainment Center Instructions / Assembly
Advertisement
Advertisement
MS663600TX
CELINA TV/MEDIA
CONSOLE
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096 [email protected]
www.seidal.com
(A) 1 pcs
(F) 1 pcs
(K) 1 pcs
(P) 2 pcs
(B) 1 pcs
(G) 1 pcs
(L) 1 pcs
(Q) 2 pcs
(C) 1 pcs
1
(H) 1 pcs
(M) 2 pcs
(R) 2 pcs
(D) 1 pcs
(I) 1 pcs
(N) 1 pcs
(S) 2 pcs
(E) 2 pcs
(J) 2 pcs
(O) 1 pcs
(T) 2 pcs
(A) 1 pcs
(F) 1 pcs
(B) 1 pcs (C) 1 pcs
(A) 1 pcs
(G) 1 pcs
(F) 1 pcs (F) 1 pcs
(H) 1 pcs
(K) 1 pcs (M) 2 pcs (L) 1 pcs
(K) 1 pcs (K) 1 pcs
A Left side panel
(Q) 2 pcs
(P) 2 pcs (P) 2 pcs
B Right side panel 1PC
C Top panel 1PC
D Bottom panel 1PC
E Leg 4PCS
F Top shelf board 1PC
G Middle shelf board 1PC
H Mix top shelf board 1PC
I Mix bottom shelf 1PC
J Cross bar board 5PCS
K Back panel 1PC
L Left door panel 1PC
M Right door panel 1PC
N Shelf board 1PC
(D) 1 pcs
(B) 1 pcs
(I) 1 pcs
(G) 1 pcs
(N) 1 pcs
(L) 1 pcs
(S) 2 pcs
1
2
3
4
5
6
7
8
9
10
(A) 1 pcs
(A) 1 pcs (A) 1 pcs
(B) 1 pcs (B) 1 pcs (C) 1 pcs (C) 1 pcs
(E) 2 pcs
(D) 1 pcs (E) 2 pcs (E) 2 pcs
(E) 2 pcs
(C) 1 pcs
(J) 2 pcs
(F) 1 pcs (F) 1 pcs (G) 1 pcs
(F) 1 pcs (F) 1 pcs (G) 1 pcs
(D) 1 pcs
(K) 1 pcs
(E) 2 pcs
MS663600TX
(L) 1 pcs (K) 1 pcs
Assembly Instructions
(L) 1 pcs
Please review all parts and hardware before disposing of any packaging.
(P) 2 pcs
(O) 1 pcs
(H) 1 pcs (H) 1 pcs
(J) 2 pcs
(I) 1 pcs (I) 1 pcs (J) 2 pcs (J) 2 pcs
(M) 2 pcs (M) 2 pcs
(O) 1 pcs
(N) 1 pcs (O) 1 pcs (O) 1 pcs
(T) 2 pcs
(R) 2 pcs
(T) 2 pcs
(S) 2 pcs
Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit.
※
(T) 2 pcs
Top supports up to 175 lb, per fixed shelf supports up to 20 lb, per adjustable shelf
support up to 15 lb, per drawer supports up to 10 lb.
1.
Wood Dowel
∅ 6mmx25mm
Quantity Of 40
M4 Allen Key
Quantity Of 34
3.
Screw
∅ 3mmx12mm
Quantity Of 33
1PC
Quantity Of 34
5.
Shelf Holder
Quantity Of 8
9.
Screw
∅ 3mmx19mm
Quantity Of 8
13.
Magnet
Quantity Of 2
6.
Screw
8*30MM
7.
Door Handle
1/ 4*25MM
32PCS
Drawer Handle
4PCS
10.
1
Pin
1/ 4*16MM
1/ 4*12MM
6*3*12MM
7*3.5*15MM
4PCS
22PCS
8PCS
Hinge
4PCS
Care and Cleaning Instructions:
PIN
Before using, wipe with a clean , dry cloth.
6*25MM
surface with rough or abrasive objects.
Do not return product to store. Please call manufacturer for assistance, questions or parts.
8PCS
call Customer Service at 1-800-633-5096.
20PCS
Tool required: Phillips screw driver
(Not Included)
2
(T) 2 pcs (T) 2 pcs
MS663600TX
CELINA TV/MEDIA
CONSOLE
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096 [email protected]
www.seidal.com
F
G
H
D
E
J
I
NO
A
B
C
DESCRIPTION
Bottom Base
Left Center Divider
Right Center Divider
Lower Center Shelf
Upper / Middle Center Shelves
Drawer Divider
Left Side Panel
Right Side Panel
Top Panel
Left/Right Back Panel
CAM LOCK INSTRUCTION
PANEL I
PAN
CAM LOCK
EL E
DGE
2
1
1
1
1
1
PARTS LIST:
QTY NO
1
1
K
L
1
2
S
T
O
P
Q
R
M
N
DESCRIPTION
Center Upper Back Panel
Center Lower Back Panel
Adjustable Shelves
Left Door Panel
Right Door Panel
Drawer Front Panel
Drawer Right Panel
Drawer Left Panel
Drawer Bottom Panel
Drawer Back Panel
CAM LOCK INSTRUCTION:
THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.
--SCREW CAM BOLT INTO PANEL II.
--INSERT CAM LOCK INTO PRE-DRILLED HOLE IN PANEL I, AND
--ROTATE CAM LOCK UNTIL ARROW IS IN LINE WITH HOLE ON PANEL EDGE.
--ALIGN CAM BOLT TO CAM LOCK HOLE ON PANEL I, AND PRESS PANELS I &
II TOGETHER.
--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL
TIGHT.
2
2
2
1
1
2
2
QTY
1
1
2
PANEL II
NOTE :
FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE
FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.
ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.
PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PERSONS ARE RECOMMENDED TO
ASSEMBLE THIS ITEM.
3
B
A
MS663600TX
CELINA TV/MEDIA CONSOLE
Assembly Instructions
C
Step 1:
Screw Cam Bolts (2) into
Bottom Base (A) as shown.
Step 2:
Screw Cam Bolts (2) into
Left Center Divider (B),
Right Center Divider (C) and
Lower Center Shelf (D) as shown.
D
Figure 1
4
Customer Service 1-800-633-5096 [email protected]
Southern Enterprises, Inc.
600 Freeport Pkwy Ste: 200
Coppell, Texas 75019
B
Figure 2
MS663600TX
CELINA TV/MEDIA CONSOLE
Assembly Instructions
E
E
D
C
G
B
H
Step 1:
Attach Upper and Middle
Center Shelves (E) and
Lower Center Shelf (D) to
Left Center Divider (B) and
Right Center Divider (C) by inserting Wood Dowers (1) and Cam Bolts (2) into their corresponding holes until panels meet.
Insert and tighten Cam
Locks (4) with Philips Screw
Driver. Attach Drawer Divider
(F) and Secure with Cam
Locks (4).
Step 2:
Attach Left Side Panel
(G), Right Side Panel (H), and the assembled unit from Step 1 to the Bottom
Base (A) by inserting Wood
Dowels (1) and Cam Bolts
(2) into their corresponding holes until all panels meet.
Insert and tighten Cam
Locks (4).
5
G
Figure 3
B
MS663600TX
CELINA TV/MEDIA CONSOLE
Assembly Instructions
I
I
C
H
Step 1:
Screw Cam Bolts (2) into the threaded inserts on the bottom of Top Panel (I).
Step 2:
Install Magnets (13) to the
Top Panel (I) using Screws
(12) as shown.
Step 3:
Attach the Top Panel (I) to the assembled unit by inserting Wood Dowels (1) and Cam Bolts (2) into their corresponding holes until all panels meet. Insert and tighten Cam Locks (4).
Note : Make sure the
Magnets (13) are facing the front.
6
Figure 4
MS663600TX
CELINA TV/MEDIA CONSOLE
Assembly Instructions
J
L
K
J
M
M
Step 1:
Attach the Left Back Panel
( J ), Center Upper Back
Panel (K), Center Lower
Back Panel (L) and Right
Back Panel (J) to the back of the unit using Screws (3) and Pins (10).
Note : Pins (10) are ONLY used to attach the center of the panels.
Step 2:
Insert the Shelf Holders (5) into the desired pre-drilled holes on Side Panels (G/H) and Center Dividers (B/C) .
Step 3:
Place Adjustable Shelves
(M) onto the Shelf Holders(5) as shown.
7
N
P
Figure 5
MS663600TX
CELINA TV/MEDIA CONSOLE
Assembly Instructions
O
Step 1:
Attach the Door Handles (7) to Left
Door Panel (N) and Right Door
Panel (O) using Screws (6) on shown.
Step 2:
Attach Door Panels (N/O) to Side
Panels (G/H) using Screws (12) into the pre-drilled holes.
Step 3:
Attach Drawer Handles (8) to
Drawer Front Panel (P) with Screws
(11) , screw Cam Bolts (2) into
Drawer Front Panel (P).
Step 4:
Assemble Drawer Front Panel (P),
Drawer Left Panel (R) and Drawer
Right Panel (Q) by inserting Wood
Dowels (1) and Cam Bolts (2) into their corresponding holes until the panels meet. Insert and tighten
Cam Locks (4).Insert Drawer
Bottom Panel (S) into the grooves of the drawer panels.
Step 5:
Attach the Drawer Back Panel
(T) to the drawer assembly using
Screws (9) as shown.
Repeat step 3-5 to assemble the second drawer.
8
MS663600TX
Assembly Instructions
Step 1:
Insert the drawers onto the drawer glides.
Figure 6
9
CAUTION
The top shelf is intended for a flat screen television with a maximum overall
width of 45” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each fixed shelf should not be loaded with more than 20 lb. Each adjustable
shelf should not be loaded with more than 15lb. Each drawer should not be
loaded with more than 10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing
possible injury.
This unit contains a permanent warning sticker located on back panel.
Do not allow children under 16 years to move the cart.
Model: MS663600TX
CELINA TV/MEDIA CONSOLE
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 06/15/2015
10
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-
Fri Central time if you have product issues or email us at service@ hollyandmartin.com
. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service
1-800-633-5096 [email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
11

Public link updated
The public link to your chat has been updated.
Advertisement