Cadco VK-120 120v, Small size, 1 IR element, 14"x10" cooking area Manual

Heavy-Duty Fast Cooking Multi-Technology Oven
Instruction Manual
VK-120: 120V
VK-220: 220V
VKII-220: 220V
VKII-220-SS: 220V
INDEX
Important Safety Instructions ............................................................................................................. 3
Certifications & Electrical Information ................................................................................................ 4
Installation ......................................................................................................................................... 5
Instructions For The Operator ........................................................................................................... 6
Notes For Use ..................................................................................................................................... 6
Operation ........................................................................................................................................... 7
- Startup ....................................................................................................................................... 7
- STEP (MANUAL) MODE .............................................................................................................. 8
- PROGRAM MODE.................................................................................................................. 9-14
- Preset Recipes ...................................................................................................................... 9
- Recipe Development / Modify Existing Recipe .............................................................. 10-11
- Upload New Recipes .......................................................................................................... 11
- Preset Recipes Settings ....................................................................................................... 12
- Recipe Notes....................................................................................................................... 13
- Settings ............................................................................................................................... 14-16
> Adjust Temperatures ..................................................................................................... 15
> Adjust Standby Time ....................................................................................................... 15
> View System Info ............................................................................................................ 15
> Update Firmware ............................................................................................................ 15
> Re-calibrate Screen ......................................................................................................... 16
> Change Password............................................................................................................ 16
> Change Operating Mode (Program or Step Mode) .......................................................... 16
Cleaning the Unit .............................................................................................................................. 17
Turning Off In Case of Breakdown ..................................................................................................... 18
Maintenance ..................................................................................................................................... 18
Accessories ....................................................................................................................................... 19
Warranty .......................................................................................................................................... 20
2
VariKwik™
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When operating this unit, strictly adhere to the following safety precautions to reduce the risk
of burns, electric shock, fire, injury, damage to units or property near units.
General Safety Information
• Read all instructions before using this appliance.
• This appliance must be grounded. Connect only to a properly grounded outlet.
• Install or locate this appliance only in accordance with the provided installation instructions.
• This appliance should be serviced by qualified service personnel only. Contact Cadco, Ltd. to obtain
information of the nearest authorized service facility for examination, repair, or adjustment.
• Keep the cord away from heated surfaces.
• Use this appliance only for its intended uses as described in this manual.
• DO NOT use corrosive chemicals or vapors in this appliance; it is not designed for
industrial/laboratory use.
• DO NOT allow children to use this appliance.
• DO NOT operate this appliance if it has a damaged cord or plug, is not working properly, or has been
damaged or dropped.
• DO NOT store this appliance outdoors.
• DO NOT use this product near water (e.g., near a kitchen sink, in a wet basement, near a swimming
pool).
• DO NOT immerse the cord or plug in water.
• DO NOT let the cord hang over the edge of a table or counter.
• DO NOT use a water jet for cleaning.
• This appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction.
Reducing Fire Risk
• DO NOT use the cook cavity for storage purposes.
• DO NOT overcook food. Carefully attend to the unit if paper, plastic, or other combustible materials
such as parchment paper are placed inside the unit to facilitate cooking.
• DO NOT leave paper products, cooking utensils, or food in the cavity when the unit is not in use.
3
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This oven is equipped with a cord that
has a grounding wire with a grounding plug, which must be plugged into an outlet that is properly installed
and grounded. Consult a qualified electrician or serviceman if uncertain about the ability to follow
grounding instructions or if doubt exists as to whether the appliance is properly grounded.
DO NOT use an extension cord. If the power cord is too short, have a qualified electrician or serviceman
install an outlet near the appliance.
WARNING: Improper grounding can result in risk of electric shock.
Power Cord Replacement or Removal
If the power cord is damaged, it must be replaced by the manufacturer, or its approved service agent.
Certification
Construction
Exterior - Stainless steel corrosion-resistant outer wrap, tempered glass door, galvanized rear enclosure.
Interior – Stainless steel, and removable anodized heat plate.
Electrical Specifications
VK-120: 1650 W, 120V, 60 Hz, 13.75 A, NEMA 5-15P plug
VK-220: 2365 W, 220V, 60 Hz, 10.75 A, NEMA 6-20P plug
VKII-220/ VKII-220-SS: 3365 W, 220V, 60 Hz, 15.3 A, NEMA 6-20P plug
NOTE: These ovens require a dedicated electrical line.
4
INSTALLATION
Install or locate this appliance only in accordance with the instructions below.
Unpacking Instructions
• Remove the unit from its packaging.
• Before discarding, check the packaging thoroughly for accessories and literature.
NOTE: Packaging may also be retained in case the unit may at some point be shipped or returned to
the manufacturer.
• Check the cooking cavity thoroughly for accessories and literature.
• Discard any packaging in the cooking cavity.
• Peel the point-of-sale sticker off the door.
Installation Warnings - Read Before Lifting Unit
WARNING:
VK-120 & VK-220 ovens weigh approximately 57 lb. (25.9 kg).
VKII-220 units weigh approximately 63 lb. (28.6 kg).
Never lift with fewer than two people.
WARNING: The unit must be properly placed on a food station at all times. We will not recognize a fallen
unit as a warrantable claim and are not liable for any injuries that may result.
WARNING: This unit is not intended for built-in installation (i.e., installing the unit in any structure that
surrounds the unit by five or more sides).
Be sure to provide a minimum of 4” (101.6 mm) clearance for all sides and 10” (254 mm) clearance for the
top.
WARNING: These ovens require a dedicated electrical line.
WARNING: These units are only stackable with the optional VK-SK VariKwik™
Stacking Kit. See page 19 or contact Cadco, Ltd. for details.
Lifting and Placing the Unit
• Prepare a surface at least 30” (762 mm) wide and 27.75” (704.9 mm) deep (30.75”/781.05 mm for
VKII-220) and capable of supporting the approximately 57-63 lb. (25.9 -28.6 kg) VariKwik™ unit.
• NOTE: Do not remove the unit legs, as clearance is required for ventilation.
Place the unit on the prepared surface, ensuring no edges are hanging off the sides.
Accessories Included
• In order to insure the cooking performance of the VariKwik™ oven, it is very
important to use the provided anodized heat plate.
• In addition, Cadco Ltd. provides an aluminum spatula to help place and remove
prepared food.
• (See page 19 for all the accessories available for VariKwik™ Ovens.)
EXHAUST CHIMNEY
On the back side of the unit is an exhaust chimney from which the exhaust that comes from the cavity is
ejected. During each cooking cycle you may have hot air and/or humidity coming out from this chimney
(temperature and humidity of the exhaust depend on the cooking parameters set on the unit and on the
type and quantity of food put inside the unit).
5
1. INSTRUCTIONS FOR THE OPERATOR
You will find important information about maintaining and operating your new oven in this manual. Please
read the manual and become familiar with your new unit before you begin to operate it. Keep the manual
in a safe place and make sure everyone reads it before operating the unit. Please use only Cadco
authorized service centers and always require quality Cadco OEM parts. Failure to comply with these
standards can compromise safety and will void your warranty.
2. NOTES FOR USE
• Your VariKwik™ oven was designed to cook and retherm food and must be used only for that specific
purpose. Any other use may void your warranty.
Use your VariKwik™ oven for tasks such as:
♦ Retherming/reheating
♦ Finishing
♦ Browning
♦ Melting cheese
• The maximum operating temperature is approximately 500°F.
Your oven’s pre-heat temperature has been pre-set at the factory for 450°F for 120V units and 425°F
for 220V units. You may modify this temperature in the SETTINGS> Adjust Temps> Modify> Adjust
Preheat screen.
• Your VariKwik™ oven features Tri-heat technology:
♦ You may set or modify the amount of time the Conductive and/or Infrared heat elements operate
for each recipe, by choosing RECIPE DEVELOPMENT> Modify Recipe> Choose Daypart> Choose
Recipe & Thick or Thin Modify screen. (See page 8.)
♦ Convection heat: Hot air circulated by rear fan. Convection heat operates every time the unit is
running.
♦ Conductive heat: Bottom heat used for browning underside of food. Typical uses include pizza,
flatbreads, sandwich toasting.
♦ Infrared heat (IR/ radiant heat): Top heating element(s) provide direct heat for finishing: melting
cheese, top browning, caramelization, etc.
♦ NOTE: 220 V units may be set to use Conductive and Infrared heat simultaneously in any given
recipe, in PROGRAM MODE only.
120V units may only be set to use one or the other at a time, and may be used consecutively.
• Avoid salting food products while they are inside the cooking cavity. Salt is very corrosive and may,
over time, damage the interior of your oven.
6
OPERATION
Before using the oven for first time, perform cleaning steps listed on page 17.
When the VariKwik™ oven is properly installed, here are very simple instructions on the operation:
STARTUP
Plug the oven into an appropriate outlet. Your oven is factory preset to STEP MODE (manual mode).
When the dark screen is touched (after plug-in or after a period of non-use (STANDBY MODE), the
following screens will appear:
Device will
automatically
move to next
screen after
3 seconds
WELCOME
CHOOSE*:
YES if proceeding
to STEP MODE
cooking,
NO if proceeding
to SETTINGS
PREHEAT?
PREHEATING
STEP MODE MENU
*Your oven’s pre-heat temperature has been pre-set at the factory for 450°F for 120V units and 425°F for
220V units. You may modify this temperature in the SETTINGS> Adjust Temps> Modify> Adjust Preheat
screen.
See page 8 to continue in STEP MODE.
If you prefer operating in PROGRAM MODE, click on SETTINGS and turn to page 9 for directions on
switching to PROGRAM MODE.
When the oven is
powering down, the oven
fan will continue blowing
for a while to cool down
the oven cavity, even after
the screen goes dark.
Oven will shut down
completely when cavity
temperature reaches 200F.
PLEASE NOTE: The user may
always push the red power
button to toggle on or off, in
whichever screen it appears.
Pushing the power button
will bring up the following
screens:
7
STEP (MANUAL) MODE
Your oven is factory preset on STEP (manual) MODE. To use STEP MODE, follow directions below.
To use PROGRAM MODE, see page 9.
PREHEAT?
PREHEATING
CHOOSE SET
COOK TIME
CHOOSE
COOK TIME
CHOOSE RADIANT
HEAT DURATION
PRESS START


COOK TIME OPTIONS COOK TIME OPTIONS
SCREEN 2
SCREEN 1
DONE
DOOR OPEN
SCREEN FLASHES & UNIT BEEPS
USING STEP (MANUAL) MODE

On first screen, press YES to preheat. CURRENTLY PREHEATING screen will appear until pre-set
preheat temperature is reached.

On next screen, press SET COOK TIME to access COOK TIME OPTIONS SCREEN 1.

Press desired cook time if it is listed. If not, press NEXT to access COOK TIME OPTIONS SCREEN 2.

When you press desired cook time, the RADIANT HEAT DURATION screen will appear. (This is the
% of total cook time in which you want to add RADIANT/INFRARED (top) HEAT to the
CONVECTION HEAT.
(NOTE: Convection heat - hot air circulated by rear fan - operates every time the unit is running.)

On next screen, press START. Cooking will begin and time will count down. (NOTE: If you press
STOP, cooking will stop and screen will revert to beginning of choosing STEP MODE COOK TIME.)

When cook time is done, flashing DONE screen will appear and beeper will sound continuously.

•
TO ACCESS SETTINGS (See pages 14-16 for detailed instructions on SETTINGS choices.)

Push NO on PREHEAT? screen. Then Push SETTINGS on the STEP MODE MENU.

On next screen, ENTER PASSWORD (factory set to 1234), then push NEXT.
• On next screen (SETTINGS MAIN MENU 1), press the yellow arrow to access SETTINGS MAIN
MENU 2 if desired.
8
PROGRAM MODE
Your oven is factory preset on STEP MODE. To switch to PROGRAM MODE, see below.
CHOOSE
SETTINGS
•





•


ENTER
PASSWORD
SETTINGS MENU 1
SETTINGS MENU 2
CHOOSE
MODE
CHOOSE
PROGRAM MODE
SWITCHING TO PROGRAM MODE FROM STEP MODE
Push SETTINGS on the MENU.
On next screen, ENTER PASSWORD (factory set to 1234), then push NEXT.
On next screen (SETTINGS MAIN MENU 1), press the yellow arrow to
access SETTINGS MAIN MENU 2.
On that screen, press MODE.
On next screen, press PROGRAM MODE, and the PROGRAM MAIN MENU will appear.
PROGRAM MODE
MAIN MENU
RECIPES – PROGRAM MODE
There are factory preset recipes programmed into your oven. You may modify them in the
RECIPE DEVELOPMENT > MODIFY RECIPE section. You may also upload your own recipes in the
RECIPE DEVELOPMENT > UPLOAD RECIPE section. (See pages 10-11.)
To access preset recipes, follow the steps below:
The “P” recipes are set up so that you may modify them
to your own specifications without uploading from USB,
unless you need to rename them and/or upload a photo.
Current Preset Recipes:
(each has Thick/Thin option = 2 recipes)
LUNCH/DINNER:
SNACK:
BREAKFAST:
Pizza - Fresh
Quesadilla
Danish
Open Face Sandwich
Cheese Melt
Croissant
Pasta Retherm
Wings
English Muffin
Pizza - Frozen
French Fries
Sandwich
P1
P1
P1
P2
P2
P2
P3
P3
P3
P4
P4
P4
See page 12 for factory presets for named recipes above.
See pages 10-11 to modify recipes.
PREHEATING
MAIN MENU:
CHOOSE RECIPES
CHOOSE DAYPART
CHOOSE RECIPE
CHOOSE
THIN/THICK
If the pre-heat has
not reached its set
point, the screen
will display
“Currently PreHeating Please
Wait.”
Unit will beep 3x
when preheat
temperature is
reached.
COUNTDOWN
When the user opens
door, screen will display
"Door Open". When the
user closes the door,
the screen will
transition back to the
MAIN MENU Screen.
SCREEN FLASHES
& BEEP SOUNDS
CONTINUOUSLY
DONE
CLICK NEXT to access additional Recipe choice screens including P recipes.
9
RECIPE DEVELOPMENT – PROGRAM MODE
In this section, you may modify the factory preset recipes programmed into your oven, and/or upload your
own additional recipes.
NOTE: The factory preset password is 1234. You may change it in the SETTINGS section.
MAIN MENU
CHOOSE AREA
ENTER
PASSWORD
CHOOSE
ACTION
CHOOSE
DAYPART
CHOOSE
RECIPE*
CHOOSE
THIN/THICK
CHOOSE
MODIFY TIME
ENTER TIME
MODIFY ANOTHER
OR NEXT
TEST COOK
RECIPE?
TEST COOK
RECIPE
TEST COOK
COUNTDOWN
SCREEN FLASHES
& BEEP SOUNDS
CONTINUOUSLY
SAVE RECIPE?
MODIFY RECIPE?
MODIFY RECIPE
INSERT USB
UPLOADING
COMPLETE
UPLOAD RECIPE
CHOOSE
*CHOOSE RECIPE
MODIFY TIME
SCREEN 2
* On original CHOOSE RECIPE screen, click NEXT
to access additional recipes including P recipes.*
CHOOSE ACTION
MAIN MENU
After Upload has completed, the screen will transition to the main MODIFY RECIPE / UPLOAD RECIPE screen after 20 seconds,
or the user can select the NEXT button.
On the MODIFY / UPLOAD screen, press BACK to return to MAIN MENU screen.



The VariKwik’s USB port is located on the lower right side of the unit. Go to www.Varikwik.com
to download the Excel/.csv template for programming new recipes and loading to your USB drive.
10
MODIFY EXISTING RECIPE (Changing COOK TIMES & TRI-HEAT COMBINATIONS)
 Push RECIPE DEVELOPMENT on the MAIN MENU.
 On next screen, enter password (factory set to 1234), then push NEXT.
 On next screen, choose MODIFY RECIPE > then choose daypart (BREAKFAST, LUNCH/DINNER, SNACK)
> then choose recipe* > then choose THIN or THICK.
 (*If the recipe you want to modify is not on the first screen, press NEXT to access additional recipe
screens for that daypart.)
 On the MODIFY screen, press the item you want to modify.
(For Time – use a “0” for the first number when entering single digit minutes (ex. 02:01.)
 Your VariKwik™ oven features Tri-Heat technology:
 In PROGRAM MODE: You may set or modify the TOTAL COOK TIME and/or the amount of time the
Conduction and/or Infrared heat elements operate for each recipe.
(NOTE: Convection heat - hot air circulated by rear fan - operates every time the unit is running.)
 Conductive heat: Bottom heat used for browning underside of food. Typical uses include pizza,
flatbreads, sandwich toasting.
 Infrared heat (IR / Radiant heat): Top heating element(s) provide direct heat for finishing: melting
cheese, top browning, caramelization, etc.
♦ NOTE: In PROGRAM MODE:
 220 V units may be set to use Conductive and Infrared heat simultaneously in any recipe.
 120V units may only be set to use one or the other at a time, and may be used consecutively.
 After entering your desired time modifications, press NEXT.
 TEST COOK RECIPE? Screen will appear:
 If you wish to save the recipe without test cooking or further modifications:
 Press NO when the TEST COOK RECIPE? Screen appears.
 The SAVE RECIPE? Screen will appear. Press SAVE. The recipe will be saved and the MAIN MENU
screen will appear.
 If you wish to test cook the recipe you just modified:
 Press YES. A screen for the selected recipe will appear.
 Place your food product to be tested into the unit, and then press START on the recipe screen.
 When recipe is done, DONE screen will flash and beep will sound continually until unit door is
opened. Check food to see if the recipe was successful or if it must be further modified.
 The next screen will ask if you want to SAVE the modified recipe, or MODIFY the recipe further.
- If you SAVE the recipe, the screen will revert to the MAIN MENU screen.
- If you press MODIFY RECIPE, next screen will be the main MODIFY screen, and you may proceed
with further modifications as described above.
• UPLOADING RECIPES VIA USB
 Go to www.Varikwik.com to download the Excel/.csv template for programming new recipes, and
associated template and photo guidelines.
 Enter your recipe information into the template and load template and your recipe photos onto your
USB drive. NOTE: USB must contain no folders or other non-recipe related items, other than
downloaded Varikwik Firmware updates.
 Insert your pre-loaded USB drive into the USB port located on the lower right side of the unit.
 On the MAIN MENU screen, press RECIPE DEVELOPMENT. On next screen, enter PASSWORD.
 On next screen, press UPLOAD RECIPES, and on the next screen, press UPLOAD.
 After upload is complete, the screen will transition to the main MODIFY RECIPE / UPLOAD RECIPE
screen after 20 seconds, or the user can select the NEXT button.
 On the MODIFY RECIPE / UPLOAD RECIPE screen, press BACK to return to MAIN MENU screen.

11
120-Volt PRESET RECIPES*, 450F Pre-Heat
***In 220 volt models all recipes are 5% faster, & preheat is set at 425F.***
*NOTE: In each recipe, Convective Heat stays on for the full cooking cycle.
Breakfast
Bottom Heat/
Conduction
:35 sec.
Convective Heat
(stays on for full
cooking cycle)
:35 sec.
first :00 sec.
Top Heat/
Infrared
(Radiant Heat)
last :35 sec.
Thick
:45 sec.
:45 sec.
first :00 sec.
last :45 sec.
Thin
:35 sec.
:35 sec.
first :00 sec.
last :30 sec.
Thick
:45 sec.
:45 sec.
first :15 sec.
last :30 sec.
Thin
:20 sec.
:20 sec.
first :00 sec.
last :20 sec.
Thick
:30 sec.
:30 sec.
first :00 sec.
last :30 sec.
Thin
1:30 min.
1:30 min.
first :30 sec.
last 1:00 min.
Thick
2:00 min.
2:00 min.
first :45 sec.
last 1:15 min.
RECIPE
Thin/Thick
Total Time
Bottom Heat/
Conduction
Pizza Frozen
Thin
3:00 min.
Convective Heat
(stays on for full
cooking cycle)
3:00 min.
first 1:30 min.
Top Heat/
Infrared
(Radiant Heat)
last 1:30 min.
Thick
4:00 min.
4:00 min.
first 2:30 min.
last 1:30 min.
Thin
1:30 min.
1:30 min.
first :30 sec.
last 1:00 min.
Thick
2:00 min.
2:00 min.
first 1:00 min.
last 1:00 min.
Thin
3:00 min.
3:00 min.
first 2:00 min.
last 1:00 min.
Thick
3:30 min.
3:30 min.
first 2:30 min.
last 1:00 min.
Thin
2:30 min.
2:30 min.
first 1:00 min.
last 1:30 min.
Thick
3:30 min.
3:30 min.
first 2:00 min.
last 1:30 min.
Bottom Heat/
Conduction
first :30 sec.
Top Heat/
Infrared
(Radiant Heat)
last 1:00 min.
RECIPE
Thin/Thick
Total Time
Croissant
Thin
Danish
English Muffin
Breakfast Sandwich
Lunch/Dinner
Open Face Sandwich
Pasta Retherm
Pizza Fresh
Snacks
RECIPE
Thin/Thick
Total Time
Quesadilla
Thin
1:30 min.
Convective Heat
(stays on for full
cooking cycle)
1:30 min.
Thick
2:00 min.
2:00 min.
first 1:00 min.
last 1:00 min.
Thin
1:30 min.
1:30 min.
first :30 sec.
last 1:00 min.
Thick
2:00 min.
2:00 min.
first 1:00 min.
last 1:00 min.
Thin
3:00 min.
3:00 min.
first 1:30 min.
last 1:30 min.
Thick
4:00 min.
4:00 min.
first 2:30 min.
last 1:30 min.
Thin
3:00 min.
3:00 min.
first 1:30 min.
last 1:30 min.
Thick
4:00 min.
4:00 min.
first 2:30 min.
last 1:30 min.
Cheese Melt
Wings
French Fries
12
RECIPE NOTES
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
_______________________________________________________________________________________
13
SETTINGS
• In this section you may adjust OFFSET and/or PRE-HEAT TEMPERATURES, set STANDBY TIME, access
SYSTEM INFORMATION, update I/O and DISPLAY FIRMWARE, RE-CALIBRATE screen, CHANGE
PASSWORD, and CHANGE OPERATING MODE (choose PROGRAM MODE or STEP (Manual) MODE.
MAIN MENU
CHOOSE SETTINGS
ENTER
PASSWORD
CHOOSE
STANDBY TIME
ADJUST
STANDBY TIME
CHOOSE
FIRMWARE INFO
CHOOSE ITEM
TO UPLOAD
CHOOSE
ADJUST TEMPS
CHOOSE
TEMPERATURE
ADJUST
TEMPERATURE
ENTER
CHOOSE
VIEW
TIMEOUT TIME
SYSTEM INFO
SYSTEM INFO*
*Conduction = Bottom heating element
Convection = hot air circulated by rear fan; operates continually
IR = Infrared/ radiant top heating element
INSERT USB
UPLOADING
COMPLETE
SETTINGS
MAIN MENU
Visit www.Varikwik.com for the most up to date FIRMWARE (download and load onto USB) and
Instruction Manual.
The most current I/O and DISPLAY FIRMWARE will download together. When uploading to your
Varikwik unit, follow process shown above to upload I/O FIRMWARE update.
When upload is complete and you reach the SETTINGS MAIN MENU, repeat the process to upload the
DISPLAY FIRMWARE.
When you arrive at the SETTINGS MAIN MENU after uploading DISPLAY FIRMWARE, press BACK to
return to the Varikwik™ unit MAIN MENU.
(Settings screens continued on page 16)
14

ADJUST TEMPS (Changing OFFSET TEMP &/OR PRE-HEAT TEMP)
Push SETTINGS on the MAIN MENU.

On next screen, enter password (factory set to 1234), then push NEXT.

On next screen (SETTINGS MAIN MENU), choose ADJUST TEMPS > then choose temperature to
adjust:
 OFFSET TEMP (the temperature swing within which a program will run without needing to
preheat again. Example: If the recipe calls for 400F, then setting the OFFSET TEMP to 20F will
allow the recipe to run when the unit temperature is 380F – 420F.)
 On the next screen, enter your desired offset temperature, and press SAVE.
SETTINGS MAIN MENU will appear.
 PRE-HEAT TEMP (the temperature to which the unit will heat when you choose YES on the WILL
YOU LIKE TO PREHEAT? Screen. That screen appears by touching the dark screen which appears
after a period of non-use (STANDBY MODE), or after the initial setup screens have been
bypassed after the unit has been unplugged and then plugged back in.
 On the next screen, enter your desired PRE-HEAT temperature, and press SAVE.
SETTINGS MAIN MENU will appear.

•
•
•
ADJUST STANDBY TIME (The time duration between the last use of the oven and powering down
into STANDBY MODE.)

On the SETTINGS MAIN MENU, press STANDBY TIME.

On the next screen, press TIMEOUT, and on the following screen, enter the desired amount of time
for the timeout. Use a “0” for the first number when entering single digit hours/minutes (ex.
02:01.) Then press SAVE to return to the SETTINGS MAIN MENU.
VIEW SYSTEM INFO (Number of hours your oven has run in each of the 3 heat modes, & number of
door opening/closing cycles)

On the SETTINGS MAIN MENU, press SYSTEM INFO. View/record information as desired.

Press BACK to return to SETTINGS MAIN MENU.
VIEW / UPDATE FIRMWARE INFO (I/O Firmware and DISPLAY FIRMWARE)

Visit www.Varikwik.com to download the most up to date FIRMWARE for your unit. Then load it
onto a USB device. The most current I/O and DISPLAY FIRMWARE will download together.

NOTE: USB must contain no folders and no other files other than downloaded Varikwik Firmware
updates, upload recipe template and associated photos.

On the SETTINGS MAIN MENU, press FIRMWARE INFO.

On the next screen, press UPDATE I/O.

When prompted, insert your USB device into the USB port on the right side of your VariKwikTM
oven, and press UPLOAD.

When UPLOAD COMPLETE screen appears, press NEXT to return to SETTINGS MAIN MENU.

(Do not remove your USB device.)

On the SETTINGS MAIN MENU, press FIRMWARE INFO.

On the next screen, press UPDATE DISPLAY.

When prompted, press UPLOAD.

When UPLOAD COMPLETE screen appears, press NEXT to return to SETTINGS MAIN MENU.
• Press BACK to return to the Varikwik™ oven MAIN MENU.
15
SETTINGS CONTINUED
SETTINGS MENU 1
CHOOSE
RE-CALIBRATE
RE-CALIBRATE
TOUCH SPOT 1
SETTINGS MENU 2
CHOOSE CHANGE
PASSWORD
ENTER NEW
PASSWORD
RE-CALIBRATE
TOUCH SPOT 2
RE-CALIBRATE
TOUCH SPOT 3
RE-CALIBRATE
TOUCH SPOT 4
CHOOSE
MODE
CHOOSE
MODE
TO RECALIBRATE SCREEN
If your screen looks disjointed, follow these directions to recalibrate the screen.

On SETTINGS MAIN MENU 1 screen, press the yellow arrow to access SETTINGS MAIN MENU 2.

On that screen, press RECALIBRATE.

On next screen, press the “+” in the top left square.

On next screen, press the “+” in the top right square.

On next screen, press the “+” in the bottom right square.

Screen will revert to SETTINGS MAIN MENU 2.

TO CHANGE PASSWORD
On SETTINGS MAIN MENU 1 screen, press the yellow arrow to access SETTINGS MAIN MENU 2.

On that screen, press CHANGE PASSWORD.

On next screen, ENTER NEW PASSWORD, then press NEXT.

Screen will revert to SETTINGS MAIN MENU 1.

TO CHANGE OPERATING MODE
On SETTINGS MAIN MENU 1 screen, press the yellow arrow to access SETTINGS MAIN MENU 2.

On that screen, press MODE.
 On next screen, choose STEP (MANUAL) MODE or PROGRAM MODE.

16
CLEANING THE UNIT
•
•
•
•
WARNING: Before starting any maintenance or cleaning operation, it is necessary to disconnect the
electrical power supply and wait for your unit to cool down.
Never allow grease splatters or spills to collect on the inside walls, floor, or ceiling of your unit. A
simple cleaning with soap and water is usually enough to keep your appliance spotless and in “like
new” condition for years. Your oven should never be cleaned with a water hose or anything more
powerful than a spritz bottle. For tougher cleaning and built up grease, we suggest using Foam Plus®
from Discovery Products Corporation (Tel. 877.822.8500.)
Never clean the cavity with acids, abrasives, or aggressive detergents.
WARNING: Using a VariKwik™ oven without a gasket or with one in disrepair may cause the hinges
to seize, as well as limit the oven's ability to maintain the proper temperature. Doing so will void the
warranty on the hinges. Please inspect and clean the door gaskets daily.
1. BEFORE USING THE OVEN FOR FIRST TIME
• Before plugging unit in:
• Pull out & clean anodized heat plate and side racks separately (using damp cloth, hot soapy water),
then replace when done.
• Clean cavity (using damp cloth, hot soapy water.)
• With the cavity empty, preheat the unit to 400°F and run for 15 minutes (eliminating odors caused by
residual protective factory grease.)
2. GENERAL
• Wipe up any spills as they occur (after the unit has cooled down for 30-35 minutes.)
• Never clean the cavity with acids, abrasives or aggressive detergents.
• Never use a spray of water to clean the outside of your oven. This may damage the electrical
components and void your warranty.
3. DAILY CLEANING
• Unplug unit and let it cool down for 30-35 minutes.
• Clean the cavity and door gasket using only proper products (degreaser, damp cloth.)
(Never clean the cavity with acids, abrasives, or aggressive detergents.)
• Pull out & clean anodized heat plate and side racks separately (using damp cloth, hot soapy water),
then replace when done.
• For heavily soiled areas, let degreaser sit to penetrate before wiping with damp cloth or scrub pad.
• Wipe door handle, door glass (inner and outer), and control panel using only proper products
(detergent, damp cloth.)
• Wipe dry after each cleaning process.
4. WEEKLY CLEANING
• Follow protocol for Daily Cleaning.
• Remove and clean door gasket:
 Pull gasket out of the channel.
 Clean with detergent & water or dishwasher.
 Wipe dry and let sit until completely dry.
 To replace after cleaning, push back into channel around door.
• Clean the outside of the unit using only proper products (degreaser, damp cloth.)
• Never clean the unit with acids, abrasives, or aggressive detergents.
• Wipe dry after each cleaning process.
17
5. MONTHLY CLEANING
• FILTERS – There are 2 air filters: a square one on
the left side of the unit and a larger round one in
the back of the unit. They are removable for
cleaning without requiring any tool.
 Gently pull black cover off of the filter.
 Hand wash with detergent & water (DO NOT
place in dishwasher.)
 Pat dry and let sit until completely dry.
 To replace after cleaning, position dry filter in
its black cover, and pop it back into place on
the unit.
SIDE FILTER
BACK FILTER
TURNING OFF IN CASE OF BREAKDOWN
If you encounter any kind of problem while your unit is in operation, or if you notice anything out of the
ordinary, follow these steps:
♦ Unplug your unit immediately.
♦ Consult Cadco, Ltd. at 877-603-7393 (Toll-Free)
Failure to do so may result in a hazardous condition and void your warranty.
MAINTENANCE
1. ORDINARY MAINTENANCE
• All maintenance operations must be done only by trained, approved personnel.
• Before starting any maintenance operation, disconnect your unit from the electrical power supply and
wait for it to cool down.
• The parts that need ordinary maintenance can be reached by removing the top housing enclosure.
2. SPECIAL MAINTENANCE
• All maintenance operations must be done only by trained, approved personnel.
• Before starting any maintenance operation, disconnect your unit from the electrical power supply and
wait for it to cool down.
RESET THE SAFETY THERMOSTAT
• This unit is equipped with a manually resettable safety thermostat
designed to protect the unit against overheating. If this occurs, it completely
deactivates the unit to avoid permanent damage.
• To reset the safety thermostat, remove the black cap positioned at the
bottom of the back of the unit by unscrewing it counterclockwise, push the
reset button under the cap, and replace the black cap.
• If the safety thermostat shuts your oven off, before turning your unit back
on, be sure to check your entire circuit to verify that the total amps being drawn by all the appliances,
lights, etc. on that circuit do not exceed the amps available on that circuit.
18
VariKwik™ Ovens Available Accessories
• CrisPlate™ heat plates: In order to insure the cooking performance of the VariKwik™
oven, it is very important to use the provided anodized CrisPlate™ heat plate.
Your VariKwik™ Oven comes with one CrisPlate™ heat plate. Additional /
replacement heat plates are available:

CCP-VK: for VK-120 & VK-220 oven models

CCP-VKII: for VKII-220 & VKII-220-S oven models
• COS-1 Oven Spatula: Your VariKwik™ Oven comes with one oven spatula to help place
and remove prepared food. Additional / replacement spatulas are available:
• CNB-VK VariKwik Food/Nacho Basket:

Solid bottom for use with foods that may not go directly on the CrisPlate™ heat
plate.

Flat bottom for maximum conductive heat transfer, and perforated sides for
consistent heat flow

Aluminum
• VK-SK Stacking Kit

Everything needed to stack one VariKwik™ Ovens securely on top of another.

Protects top oven from heat rising from bottom oven

Stainless steel
• Oven Cabinet Stands for VariKwik™ Ovens

Stainless cabinet

Silent casters (2 with brakes, 2 with directional locks)

2 sizes:
 VK-OS1 Standard size
 VK-OS2 Short size
• Ventless Hoods for VariKwik™ Ovens (available late spring 2020)

Hoods remove odors and grease-laden vapors expelled by the oven exhaust.

No outside venting required (subject to verification and approval by local
authorities & regulations.)

Includes electro valve for direct plumbed water connection.

Stainless with charcoal finish
19
WARRANTY
•
Cadco, Ltd. warrants VariKwikTM ovens (in the United States and Canada) to be free from defects in
material and workmanship for a period of two years from date of purchase, unless otherwise noted
below***.
•
Warranty does not apply in cases of misuse, abuse or damage from external service or repair attempts
by unauthorized personnel.
•
Your appliance was designed to cook and retherm food and must be used only for that specific
purpose. Any other use may void your warranty.
•
Copy of original invoice is required for proof of purchase date for warranty coverage.
•
ALL WARRANTY / SERVICE ISSUES MUST BE AUTHORIZED FIRST! PLEASE CALL TOLL-FREE (877) 603-7393.
•
WARRANTY PERIODS:
 Two year limited warranty (One year on-site service & parts, 2nd year parts only)***
 ***90 day warranty on all gaskets. NOTE: These items are easily changeable on-site by user and
do not qualify for service center warranty assistance.
NOTE: Using a Cadco oven without a gasket or with one in disrepair may cause the hinges to seize,
as well as limit the unit’s ability to maintain the proper temperature. Doing so will void the
warranty on the hinges. Please inspect and clean the door gaskets daily.
 ***30 day warranty on glass.
If required, call Cadco directly for warranty replacement of these items within first 90 days.
 OVEN MOTORS ARE BACKED BY A ONE YEAR WARRANTY
•
WARRANTY PROCEDURES:
♦ Please do not take your oven to the store where you purchased it for warranty repair. For the
Cadco authorized US service agent nearest you, please contact:
Cadco, Ltd., 200 International Way, Winsted, CT 06098
Tel. (860) 738-2500, Fax (860) 738-9772
E-mail: [email protected], Web site: www.cadco-ltd.com
Please note: visit our website www.Varikwik.com to download the most up to date Instruction Manual,
I/O Firmware, Display Firmware, and Excel template for programming new recipes.
1/16/2020 RV09
20